Replacing The Cracked Oil Pan Required A Torch! Be careful not to burn anything!!

Cyclops Light - amzn.to/48BiJbG
Easy to use handheld - amzn.to/46nMFrz
Budget friendly, professional style scanner - amzn.to/44iDdUM
Basic Code Reader - amzn.to/3GZFDhT
Blue tooth scan tool - amzn.to/3org3vL
Perfect panel trim tool - amzn.to/40hPshS
Push pin removal pliers - amzn.to/3US2FN7
Excellent beginner plus tool kit - amzn.to/3UY6e4z
Excellent Basic Starter Tool Kit - amzn.to/41JVRn2
Must Have Gearwrench set - amzn.to/3AfZNAc
Power Probe Circuit Tester - amzn.to/3mOrQ6N
Basic Test Light - amzn.to/40mKdNN
#misfire #checkenginelight #checkengine #fuelinjection #fuelinjectorcleaner #fueleconomy #hyundai #hesitation #oilleak #oilchange
Facebook links - both Facebook are closed groups, meaning you have to answer all the questions to join. Both groups are full of follow mechanics, some retired, some working in the trade & some excellent backyard/shade tree mechanics.
Show us what you're working on!
Wrenching with Kenny = / 575412787264269
Backyard Mechanics = / 442507346633755
‎@WrenchingWithKenny ‎@SNAFU.performance ‎@traditionovertrend2704 ‎@ktmracingsisters1261 ‎@matersworkshop6123 ‎@MotorMouthRadio @cruzcorp914
#wrenchingwithkenny #keepwrenching #wesselmotorworks
#mechanic #automechanic #autorepair #automotiverepair
#airconditioning #airconditioner

[@joemuncie9187]

Funny you should mention 1989. It was 7/2/89 when I towed my brother's 1979 Monte Carlo to the shop. He had purchased it new and after 115K it needed an engine rebuild. He didn't want to invest in it so I took it on as a project. By October I had it running. It ran so well that I kept driving it. 35 years later and I'm still driving it. I've only put 69K on it, I've always had 2 or 3 cars, and I didn't drive to work. 35 years!!!

[@petescustomcarshop]

I had a 79 Monte, Texas car. I wish I never sold it. I loved that car.

[@joemuncie9187]

It took 2 years, but in 2003 I found a 1988 LS that was in good shape. That's been my other everyday car.

[@jthonn]

I bought a brand new New Yorker in '89, beautiful car, and it turned out to be a good car. It had the 3.0 Mitsubishi engine, which is a very good engine, but lacked the power it really needed. Just thought I would throw that in. Nice job on the oil pan. Thanks for sharing.

[@dogdooley4495]

Having no lift, I definitely prefer gaskets.

[@glennfields8121]

Kenny, good afternoon. I'm not there to see and inspect the new oil pan but on the video, it looks like the new oil pan is made a little tougher or is that just my old eyes playing tricks on me? Kenny you have done a fantastic job as usual but I got ta be honest when you started say let's wrap this up at about 26 minutes in, I started getting excited thinking ahead that "Are we going to "Mexico" to test the new pan for possible leaks. I love when we go to 'Mexico" and any time that you are installing bolts I expect to hear "you don't have to go Bananas". I would be so disappointed if you didn't say that. Love ya brother. Thanks for making me laugh as it is some of the only joy that I have. Say hi to Meg for me and Gigi too and Aiden and Abby. You have the 'BEST' auto repair channel on KZbin.

[@goodcitizen64]

Good job Kenny!

[@raymondebert180]

I love it when you break out the fire Kenny 🔥

[@mikeburnett7028]

WOW. I’ve never seen an oil pan so difficult to remove.

[@David5467]

Hi Kenny Thanks for the video, I was about to do the same repair on my car after the mechanic used the sump as a jake spot. ( i won't be going there again) I don't have a source of heat in case i can't get the gasket to give so i will be getting the new place to fit the pan for me. Your video saved me from potentially getting stuck half way thru the job. Thank you.

[@Dono-eg6cg]

Love your vids sir.your a great worker....work safe....will keep watching !!

[@felixdakatt6995]

Ken, i would use deadblow and whack the bottom of pan like you hit a parking stop. Usually came loose after a few hits. Never tried the torch method tho i believe it would help. Have fun!👋

[@82_KID]

J-B Weld? I did that on a BMW once.. and (if you let it harden all the way) it should hold!!! 😂 I'll see myself out now.

[@davegallucci9327]

Good job. They don't make pans like the use to! 😊

[@WrenchingWithKenny]

That's the truth! Keep wrenching 🔧

[@Michael-yi4mc]

My Amazon boxes soak up the dripping oil from my car. Nothing goes to waste.

[@lowbudgetbob1155]

Don't ya just love those glued on oil pans lol. What a pain in the keester...

[@InsideOfMyOwnMind]

That AC bracket looks like such a pathetic afterthought. Having second hand embarrassment for Hyundai.

[@rogerlishman2532]

It was surprising to see how much oil was left in the pan, despite thorough draining. Thus a regular oil change is not quite a one hundred percent change.

[@Michael-yi4mc]

You can borrow my 36 inch pry bar. Lots of leverage.

[@donaldkiser3697]

That sealant should have set overnight before adding oil , could start leaking because as the engine heats up with non cured sealant you can bet the hot oil is looking to get out. Sealant needs to set to guarantee a lasting seal.

[@WrenchingWithKenny]

That would be optimal, but tying up a lift is not realistic for a shop. Also, hyundai/Kai doesn't recommend it. I agree with you, though. Keep wrenching 🔧

[@stealthg35infiniti94]

Kenny I just did an oil pan and followed the instructions on the Permatex Tube. " Allow 1 hour drying before Torquing. Allow 24 hours before adding fluids." Have you witnessed any failures not following Permatex directions? It could be a time saver if not required.

[@MrJet30]

Kenny What happens if gasket maker gets squished and mixes with the oil ? will it plug up things and ruin the motor? I think i used to much and its in my oil now.

[@SeanBZA]

Just gets caught in the strainer, and will mostly come out in the first oil change. Best to change that oil now, and see just how much comes out with it. go to the dollar store and get a platsic sieve, and use it to catch it out of the draining oil, and you will see what is in there. Cool engine, not hot as those cheap dollar store sieves will melt.

[@redwoodforest3572]

From experience I would add 1 thing. Ensure that you don't have a glob of the Permatex/Silicone in the pan bolt hole when tightening the pan bolts. Too much and it will strip the aluminum threads out upon tightening.

[@davidweum]

I have 274000klms on my 2003 Saturn..Nothin' fancy but my daily driver got 14-15 years. I had to put repairs on it, but I figure it cost me $200/year parts and labour. I've been blessed?!!

[@doug4834]

How is Mrs Wrenching doing, progressing well I hope .

[@WrenchingWithKenny]

She is doing everything possible to get better. Thank you so much for your kindness - Kenny

[@donniee1934]

Really enjoy your videos, thanks Kenny. I'm surprised you didn't screw in a couple of long studs to make the initial line up of the pan easier.

[@gadasavideos8564]

Remember to take filter off first to get full drain.

[@Michael-yi4mc]

Didn’t come in for an oil change. It came in for an oil pan replacement.

[@gadasavideos8564]

@Michael-yi4mc was tongue in cheek comment. He just did a video saying to remove filter first or there would be residual oil left in pan. May not even have applied to this vehicle. And of course, any residual would get removed since he was changing pan.

[@donames6941]

😅i hate it when things are glued on. Instead of using gasket sealer, i had a water pump that way and no place to pry on it, ending up braking it off then the clean up is tuff

[@glennfields8121]

Kenny, at just after 28 minutes (and, yes I pause the video often and sometimes replay sections) you had the engine running and looking for leaks and I was yelling, "Let's go to Mexico!", but you ignored me or didn't hear me. I'm good with that, are you?

[@82_KID]

1:04 Yes, but does it have a PanHANDLE like Florida? 🤣

[@chuckthomas6576]

I think Kenny needs a shirt that says"Don't go bananas" with a monkeys face with panic eyes. '

[@mistersnapon]

Is that the kind of silicone that has to cure overnite?

[@christinamoneyhan5688]

Man Kenny, you sounded like Kamala trying to explain where we were so we know where we are going because we were there but, now now we are here. However I know exactly what you were sayin*. 👍👍👍🙏🏽❤️✌🏻

[@thomasdaum1927]

Why not just a regular gasket instead of that mess ? I’ll bet Lub Locker makes one for it . Or Felpro .

[@jameswood9764]

Use as much light as you need it is way better for you to see what you are doing instead of damaging something?! Just make sure you have a fire extinguisher nearby! Remove the old drain plug and save it for a later repair??

[@user-my7hv5ld7b]

you could use your torch and a coat hanger as a brazig rod and fixed the old pan

[@bigdaddymak1439]

You can do that on your own stuff, shops can't do that

[@w2tty]

I never saw a pan so glued to a block. Why does that happen?

[@glennfields8121]

Kenny, is Bobby on hiatus?

[@Michael-yi4mc]

You have a monkey’s face in the engine crankcase.

[@tindalowos]

did they jbweld the pan on? jeez

[@Michael-yi4mc]

I didn’t see what you are doing. I know what you’re doing. I fix cars, too!

[@Michael-yi4mc]

You melt the silicone. Not burn it.

[@ironcross420]

FOUND your doppelganger same name kzbin.info/www/bejne/gqWUiYOFZaaHodE I've used guitar strings before for gaskets. Get the smallest wrapped string and smallest dia string for electric guitar

[@barrymcguyer6206]

pan could have been drained, cleaned real good and JB welded, save a lot of time and money! But, not my car or my money.

[@terrystroble8657]

That thing is going to leak.

[@kurtdianebaumgartner972]

Please explain why.

[@dogdooley4495]

I didn't notice any potential leak areas.

[@46bovine]

Oh no, you torch-ered that poor oil pan!