Replacing the Feed Gears - Singer Sewing Machines - Part 2 - Setting Feed Timing

[@dingalarm]

Thanks for the excellent video! I'd like to know if the 4 pc Singer Sewing Machine gear sets (for models 502-522) advertised on eBay are also suitable for this machine (I have the same model).

[@npaisnel]

Mate, thanks for the video, just what I needed…..but… 😜. some really detailed and long explanations on how and where to squirt oil, lubricate the shafts / gears etc, then at 5 :47 seconds, the actual timing part, the most important bit ! 😂 you just say ‘Needle bar at bottom dead centre’ No explanation at all of where or what the needle bar is, how where we see it. I see the timing marks on the shaft/ cam area to line up to time the feed gear, but nothing about what/ where to check the ‘needle bar’ is at BDC. I found myself shouting at the screen when you were over explaining how to move a stuck gear on the shaft in previous video, yet get to the important tech detail bit and it is gone in a second ! 😂😂 No offence intended, bloody great of you to do these… my aunts new gears are in the post.. so hope you get back to me before the postman arrives ! 😁

[@sauces_official]

great video, appreciate the clear views.

[@catherinestavrakos9180]

Your videos helped me change the gears on a 514. Thank you! I wonder if you can help me figure out why the handwheel is quite stiff to move by hand.

[@omninulla9472]

Did you oil it up?

[@marchallesmith8030]

Do you have any suggestions for removing a screw that won’t budge? I tried on p b blaster but it wasn’t any help. I’m working on two machine and it’s the same screw on both that I can get out to slide the gear off.

[@Daveunruh]

I can’t find the hook timing video.

[@dingalarm]

See the link @ 1:06

[@mynnpaige1009]

Audio is messed up, can't understand unfortunately.