one does not just "install" a carrier without doing the input shaft. gonna be really mashy, or really loose. you can even hear the bearings in the pig howling before you finished.
@soopavillian19876 жыл бұрын
Good video bud, my only thoughts was the sound levels going from hard to hear you to the music being loud. Keep working on the Dodge and making videos of it they are fun to watch.
@rickmarchion6 жыл бұрын
Yea it's hard to remember to flip the mic around
@DruNature6 жыл бұрын
Sweet, can't wait to see that thing in ACTION through some swamps!
@rickmarchion6 жыл бұрын
Sadly I might not be able to any more price for toy vs price for drivable vehicle dont work togather.
@robbutler197772 жыл бұрын
I needed to see the diff come out and the skipped it. Did you use special tools. Ply bar? Hammer?
@mattz42292 жыл бұрын
Didn't see you mark your caps or speak on that. mine had a factory X. Didn't clearance that new diff either though and that makes me sad.
@commonsurvivor3 жыл бұрын
It's not easy doing something when you're laying on your stomach good job
@pariswilliamsjr7838 Жыл бұрын
Music is sick! 🔥
@dramafarm24024 жыл бұрын
You can’t adjust The timing on that truck. It’s all computer bull shit.
@JohnDoe-vy5hh9 ай бұрын
Omg that obnoxious loud guitar flailing of the fingers.
@arturogonzalez7133 Жыл бұрын
Help a lot the 4x4 activator I wish you move the Camara to se both thanks you is good
@davidturpin62522 жыл бұрын
I see this is a older video And this is how to learn by doing things you’re self Nothing wrong with that But in the future get your self some jack stands or blocks of wood and definitely not cinderblocks they crush under load The reason why you need stands or blocks is if your jack slips or fails Or even worse you little boy comes out to see what your up to and happens to bump that jack And your car comes down and crushes you Or you kid if he crawls under there with you Nothing good can come out of it happening So do yourself a favor and get some blocks or nice jack stands Also I think learning by doing is the best way It may cost a little extra for some mistakes but in the long run you will have a vehicle that you can depend on and know what it takes to get it going again 👍
@letsgobrandon32922 жыл бұрын
Great advice. I've had a car fall on me. 79z got lucky and fit sideways between gas tank and body behind back seats. 5 mins earlier or later would not have been so lucky. Always have jack stands now. And exactly, that's how you learn. By doing it so great job tackling it. Keep mud slinging!
@letsgobrandon32922 жыл бұрын
And yes music sucks. Turn that shit down. Hahaha
@jordanvallo46693 жыл бұрын
Where did you buy the Front Differential?
@davidturpin62522 жыл бұрын
Ok a further into the video I see jack stands The first thing you need to do is place those jack stands before you go under The last thing you would want to happen is have your son walk outside and see you smashed under your truck It happens There was a news report about a guy found under his car He had been there a few days before a friend came by to see why he had not heard from him And found him there They think it was a earthquake that happened a few days earlier that week that caused the car to fall off the jack Ha had jack stands setting just a few feet away Fixing your own stuff is the way to go but take that extra minute and save your self a lot of possible headaches
@Tomek19853 жыл бұрын
What make and exact model of rims you have? What ET or back spacing they have?
@rickmarchion3 жыл бұрын
Baja 8s from jegs and 5.50 or something not sure
@fernandomendoza46674 жыл бұрын
Where Did You Bought The Front Differential Gasket ?
@rickmarchion4 жыл бұрын
I just put gasket maker on it.
@mikeeckebrecht61992 жыл бұрын
Good job I'm glad I watched your video already taking the front end apart axles seals were leaking on the one I'm working on and I didn't see if there was a replacement of that or does the right side I'm trying to figure out how to get the seal out of the housing to I think the split shaft is a piece of shit design having issues with that
@adrigussen11993 жыл бұрын
i was looking for help on youtube to do the job.....:-(
@rickmarchion3 жыл бұрын
Sorry it was a first video I had no clue how to flim it right
@hazeltate66143 жыл бұрын
The music was of no use whatsoever
@jasoncox56742 жыл бұрын
Says you. I done some jumping Jack's and air punches.
@jvhamby53 жыл бұрын
How the heck did you get the differential out?? I’m struggling on my 95 ram 1500
@tommywelch4575 Жыл бұрын
Used jack stands!
@RandomsFandom4 жыл бұрын
slides out axle shaft, fallowed by more carnage
@lionsdejudah3 жыл бұрын
I’m here to beat you up by my comments on how you didn’t do some things right here.
@rickmarchion3 жыл бұрын
This was how long ago? Haha i didn't do alot right in most of these videos
@badluckb0y82 жыл бұрын
Do you have to remove the actuator to do this??
@traviscavage76894 жыл бұрын
Omg you skipped the part I needed the most. How to get the spider differential out!! But I didn't know it was a two part axe many thanksl and you never said anything about how to properly put the seals on and how to put gear oil back in
@rickmarchion4 жыл бұрын
Mine was damaged and twisted so I had to beat it out. Normally once you pull the axles and unbolt the 4 bolts you can lightly pry it out. And the seals are a pain in the ass I'm not good at explaining it cause for me its alot of cussing and beating things unless you have the correct seal tools and I dont.
@rickmarchion4 жыл бұрын
I also changed my whole diff not just the spiders.
@ponyboyc4 жыл бұрын
There is no easy way getting it out is does not slide out like normal diffs I used a tow strap and come along off my frame