Рет қаралды 65
14mm and 10 mm socket, a flat bladed screwdriver and torque wrench should get this job done.
Remove the front and rear door sill trips, move the front seat forward, remove the pillar trim, lever the top belt bold cover open, remove top and bottom 14mm bolts then the 10mm locator bolt on the retractor mechanism.
I applied loctite to the new 14mm bolts and the old 10mm locator bolt. Re-assemble in reverse order. Make sure you have released the belt sufficiently before installation to locate and fix the top and bottom bolts.
Kenya
#kennymepicadventures #kennym #79serieslandcruiser #landcruiser #seatbelt #seatbeltreplacement