Replacing Unit Injector Pump for DEUTS F3L.

[@abdullahjawad3251]

Good vibes

[@abdulkarim-kp4op]

Thank you so much for the sharing...

[@charlescopp3432]

Great job 👍

[@panchovillaz8004]

Thanks gracias ❤

[@MitzvosGolem1]

Rubber timing belt must be changed 2000 hours or pushrods get bent . Just did one . Those units are injection pumps. Good 👍

[@DINISCHKALAI-qe8qo]

Hi I have a duetz engine having problems the shut off valve turn off automatically when engine running few seconds. I check the solenoid external ok. So can you suggest which part or component to check and how to check tq

[@MachineHealer]

Check your alternator voltage supply, maybe your alternator is no good

[@DINISCHKALAI-qe8qo]

Hi when I can get the timing pin. Then can I just set by timing pin only when replace a injector pump

[@MachineHealer]

From Deutz dealer. Or try to Amazon.

[@nemrodbaterna5806]

Hi healer, what is that timing pin you inserted beside the # 2 fuel pump preventing from moving and why?

[@MachineHealer]

To make sure you are in the right position

[@nemrodbaterna5806]

Fuel rack

[@robvandijk2973]

is not a timing pin, it is for the feul rack (how much fuel is injected).

[@elliotmondragon897]

Hey Machine Healer how do you fiind out your pump was not good?

[@MachineHealer]

A lot of causes sir. Sometimes not start, misfires, hard start, white smoke and much more!

[@brisiobrien1]

Ok, I see how to do that job but... how do you time the injector pump? You can move the pump back and forth on the slots (before you install both nuts), what is the proper setting? Full left, full right or center?

[@MachineHealer]

My friend I don't know what do you mean full left or full right. But if you have a pin timing you don't have a problem to change that pump, it's very easy.

[@robvandijk2973]

@@MachineHealer thats not right, you can install the pump incorrect. I know because I'm dealing with this right now :(. the timing is not affected by changing out the injector pumps. Look at this video for reference kzbin.info/www/bejne/fqvLkpmMhtCkrpI

[@elliotmondragon897]

Hey Healer Machine how do you calibrate them if you need to? Thank you in advance

[@MachineHealer]

Send to calibration center or DEUTS dealer...

[@jamescoverdale1957]

Hi mate the end of the deutz f3l injection pump video is missing help please

[@MachineHealer]

I don't know what is the missing?

[@user-rg5bn9hy4c]

Why you are changing this pump

[@MachineHealer]

Low power plus leaking