One of my nozzles came out of the slot and I couldn’t figure out how to get it back. This video was huge help, took less than 30 secs. Thanks a bunch!
@divinejudge14 ай бұрын
My mom told me the nozzle on the passenger side was not spraying. I was troubleshooting it and took it off, thought soaking it in water would clear it. It wasn’t the nozzle b/c I decided to swap the driver & passenger side and the problem still exists. Do the hoses get clogged???
@robsgaragewoodworkin4 ай бұрын
They can. Squirt it a couple times with the nozzle off and that should clear up any issue. Another likely issue is a kinked hose. Make sure it’s not kinked or pinched. Good luck!
@Highlander15187 ай бұрын
Great vid. For anyone watching the Civic Type R FK8 nozzle fitment is slightly different. The tabs are inside the bonnet/hood. I had to replace the drivers side nozzle and to be honest, I had to use brute force and a flat head screwdriver to get it out.
@StandAndStare2 ай бұрын
I just took mine out and soaked in strong detergent for a few days and they've been fine for years since. They didn't appear blocked but they wouldn't spray properly. I was also surprised it worked.
@robsgaragewoodworkin2 ай бұрын
@@StandAndStare Nice!
@MrSmid8882 жыл бұрын
These simple videos are gold sir, cheers 🏴
@robsgaragewoodworkin2 жыл бұрын
Lol! Thanks!
@MrSmid8882 жыл бұрын
@@robsgaragewoodworkin update*** I bought the parts. I’ve a 2017 1L vtec turbo civic. Scotland. I tell you something, they take some getting off! Probably the originals, man I couldn’t twist it, plus I was laying over the full engine to reach 🤣. I had to resort to prizing the end of the rubber tube loose. The right hand side one the pipe was very short, I had to hold the new part in my teeth so once I pulled the old one off I couldn’t let go or the pipe would’ve sprung up into the hood! 🤣 Anyway they work a treat. This was a real world story 🤣👍🏻 I noticed the old ones the part that does the misting wasn’t there, it was just a hole in each. Strange. 🤷🏻♂️🤷🏻♂️🤷🏻♂️
@rodthorogood9257 Жыл бұрын
Extremely clear and helpful, thank you! 🙂
@c.julien82668 ай бұрын
Thanks for sharing. So easy, even I can do it!
@priyakantsharma2732 Жыл бұрын
Man, thank you so much for this very informative video. ❤
@hrishikeshakolkar57032 ай бұрын
Thanks Rob ✌️
@robsgaragewoodworkin2 ай бұрын
@@hrishikeshakolkar5703 You’re Welcome!
@joshuawilliams69962 жыл бұрын
Thank you very much exactly what i was looking for guidance on :)
@robsgaragewoodworkin2 жыл бұрын
Awesome! Good luck with your repair!
@rogercashmore49612 жыл бұрын
Thanks mon amigo! From 🇬🇧
@natalyapavliuc32416 ай бұрын
Thank you so much
@SheHasADopeSoul772 жыл бұрын
Would these actually go out on an 18? I find this mind blowing that they would deteriorate so soon
@robsgaragewoodworkin2 жыл бұрын
I think they froze which caused the issue. I didn't put in the winter washer fluid on time...
@Schlemiel-schlimazel2 жыл бұрын
Couldn’t see the most important part-how to place them! Both of mine came out in the last ice storm! Can’t figure out how they fit into the slots!😓
@robsgaragewoodworkin2 жыл бұрын
Yeah it's hard to see. Just before the edge there is a ridge that the nozzle body fits in. Align the nozzle body to the ridge and roll the other side up until the release tab snaps into place. You should be able to expand the video on your computer or play it on your big screen TV for a better view. Good Luck! Cheers! Rob
@DANNY-go6dy Жыл бұрын
Tanks tanks tanks 🙏🏻👌🏼👍🏼
@teddylifestyle37322 жыл бұрын
Where you buy the replacement nozzle
@robsgaragewoodworkin2 жыл бұрын
Dealer only part.
@slntscpe2 жыл бұрын
Did you find them or have a lart number
@rogercashmore49612 жыл бұрын
Amazon UK?
@rachelroxas39212 жыл бұрын
I like your headset
@robsgaragewoodworkin2 жыл бұрын
For me it works better than a lapel mic. Cheers! Rob
@slntscpe2 жыл бұрын
Part number please
@robsgaragewoodworkin2 жыл бұрын
I had to go to the dealer to get them.
@slntscpe2 жыл бұрын
@@robsgaragewoodworkin cool, I thought they were stampd on yours