Rescuing a Forgotten DRAG Banshee... INSANE CHANGE!

Rescuing a Forgotten DRAG Banshee... INSANE CHANGE!
#yamahabanshee #fastestbanshee #stupidfastjohn
BP RACING ATV!
bpratv.com/col...
Where i buy ALOT of OEM & Aftermarket atv parts! - Rocky Mountain ATV - www.rockymount...
If you didn't already and enjoyed the content hit that subscribe button! / @stupidfastjohn
Check us out on Facebook! - stupidfastjohn
Check us out on Instagram! - instagram @stupidfastjohn & @cameramanwes
tiktok - @stupidfastjohn
Email me with ideas/info/tips whatever you want! - [e-mail]
Some of the links in the description are affiliate links. If you click on one and purchase, I’ll receive a small commission. This does NOT cost you anything & helps support the channel and allows me to continue making awesome videos like this for you guys to enjoy. Thank you for your support!

[@StupidFastJohn]

Guys i want to say thank you so much for reaching out over the 9 month break, the comments texts and emails really pushed me to keep going 👊 im not normally the type to do re-uploads but i worked so long on this one. Drop a comment i dont even care if its the same thing u wrote on the last one 👊🙌👌 tx again and TONS more content coming next week!!!!

[@Mac181]

Wats going man me n bro love your stuff my bro built a cr 125 with a big 144 bore custome pipe electron card reeds jets the hole nine but he never even finished it alls he needs to do is put on the outher rad and add fluids and break ot in but he needs a boost of modvation could you give him a shout out ino if you said get r done he would I tried everything it would mean a lot bro

[@ralphvasso7209]

Definitely missed you my friend

[@just_in_time5518]

Looking good John! Where did the other half of you go!? 🤣 Glad you guys are back though missed ya! 😎

[@phillipautwell5723]

Thanks for sharing the build with us.. great music selection also..

[@richknight7307]

Brother this build is ridiculous keep the vids coming I love this stuff I can watch all day and night

[@daltoncarter7091]

Wow I’m so glad to see a upload, i just checked in a couple days ago. was hoping everything was ok with you glad your back 👍

[@chuckfrisoli1170]

This thing sounds nasty! Glad you’re back!

[@benatkinson2775]

The re-watch is still as good as the first! That thing is an absolute beast John! Can't wait to see you ripping and kicking ass in the dunes! 😝

[@StupidFastJohn]

Ty bro! 👊🙌

[@johngereny2086]

Glad your back!

[@mikecolwell5387]

You look better, more healthier at your new weight good job John. Bikes a monster bro

[@StupidFastJohn]

Ty bro!

[@chriscallas9483]

Lookin healthy bro. Video was epic and so is the Shee. 3 kicks, I was almost happy as you.

[@goldenwheeledbanshee9160]

Hey I'll probably watch this a few times. Don't bother me 2 watch this again. Great video an beautiful Banshee!

[@professionalsourcingsoluti2386]

Hell yeah brother!! Looking forward to your content!!

[@Shadowz_660R]

Dude that sucks the last video messed up. Going to watch the entire video again in hopes you regain some of the brews and comment that were lost. Bad ass banshee build dude can't wait to see you really stretch its legs.

[@StupidFastJohn]

Ty bro! 👊 i appreciate you

[@AllThingsCycle]

Sick build brotha

[@scottmchenney7776]

6:56 was that a fart that didn’t get edited out? Awesome video by the way I’m a huge banshee fan!!

[@StupidFastJohn]

Yea 🤣🤣🤣🙌

[@minideluge]

Great vids John ! That banshee is a beast🤘

[@Z24300hp]

I'm jealous! Lol Nice bike John.

[@SukiInDubai]

Nice work buddy

[@williamcook5853]

Nice Banshee looks pertty fast ,

[@stephencorsie8104]

Good to see u back , missed u matey

[@StupidFastJohn]

Ty bro 👊

[@nateherbst1138]

Love your videos man!!! So glad your back

[@just_in_time5518]

I see that s10 in the back round Bro looking nasty!

[@StupidFastJohn]

Tx bro! Been a hot minute glad to see you commenting brother 👊🤙

[@just_in_time5518]

@@StupidFastJohn hard to comment while watching on the big screen, but try to go back through the phone, just got to remember …😂

[@mrhanky5555]

Ridiculously fast John

[@christianlynn6997]

Great video man keep it up looks great!!!

[@choppaholic7204]

You look great John. Keep pushing to be the best you💪🏾 great video btw

[@StupidFastJohn]

Ty bro appreciate you 👊

[@marcusvalentin5485]

130 hp banshee sounds nuts xd

[@motolove293]

Mind me asking what song that is at 43:18 of your videos shits fire and the banshee content never gets old bro keep up the solid work!!

[@StupidFastJohn]

On epidemic sound Shape it by majk jutbo Ty bro 🤙

[@motolove293]

@@StupidFastJohn Thanks!! And I h8 to bother ya but I’m waiting on a inner clutch washer the one I have broke the tabs off facing in I’m kinda impatient do think it’s fine to run as is-02 Yamaha blaster

[@brianvann9727]

Are you going to talk about why you and Mike are not working togather anymore? I feel like he does this to everyone!

[@blayneerwin9276]

Love it ❤will we be seeing anything done to the old 400 anytime soon

[@StupidFastJohn]

It is absolutely on the list 👊 i have a stockpile of stuff for it. Need a few more things yet!

[@iseeyouseemee]

You made this look soooo easy .. your a beast 💪🏽

[@StupidFastJohn]

Ty bro! 👊

[@ertl_customs3545]

messed up a few things on this motor… the oil you used to “lube the bearings” does not belong in the bottom end of a two stroke… especially the crank case, and no none of that oil in the crankcase will wash out when you do an oil change since theres only oil that can be drained in the transmission. another thing, when re tapping cases or anything at all you should atleast make an effort to try and remove the metal shaving that were created. also, you SHOULD NOT be using a cut off wheel or grinding wheel right next to a fully exposed motor. now heres the worst of the worst, why did you impact the flywheel not so much? no torque spec on that or? this motors crank and rod bearings are going to fall very fast because of the “lubrication” you put in the crankcase.

[@StupidFastJohn]

50 hours on it so far zero issues and counting 👊

[@josephmadden3096]

carnt believe that happened but I'll say the same again am so glad you are back and are well, keep making the great videos

[@StupidFastJohn]

Ty bro 👊

[@gavincardwell2223]

I really missed watching you

[@kennynadeau17]

🔥

[@timothylong68]

Nice opener for the video

[@dons2652]

Great video!!

[@mikecatania6364]

Glad to hear you weren't in jail!! Lol

[@kernelbadness]

Doing Anything with Sabo?

[@evana1112]

My buddies10 mil 521 on alcohol and out of fames makes 150+ hp , the 521 is no joke my 489 4 mill makes a little over 100 hp on 110, it’s going in soon to be put on alcohol, overrides trans and out of frame led pipes, should make around 130hp

[@StupidFastJohn]

Thats sick!!! Its an incredible platform man! They are ridiculous lol

[@bradkocks3163]

Good job that thing rips,but it has the stupid rattling banshee Kickstarter....easy fix take it apart & put a 6mm airsoft pellet in it & reassemble..no more rattle

[@StupidFastJohn]

Tx for that 👊

[@theexisting1514]

lets go!

[@StupidFastJohn]

👊👊👊👊

[@topsecertdriver4853]

So this is the black banshee now

[@topsecertdriver4853]

Sick bro i would love to ride with you someday even tho i dont own a qaud i love them and i love your channel maybe oneday you could choose a fan to go on a ride day with you for the weekend at the dunes or somthing

[@highlightzilla9581]

Man if I didn't have two daughters that takes all my money I would of been got me one ahhhhhh I need hit the lotto

[@samizaairat895]

killin it.

[@StupidFastJohn]

Appreciate you!

[@jasonmilam9930]

YEEEEE YEEEEEEEE

[@pererasajith8670]

How to make transmission drag recing

[@angelmarquez1977]

Take it to the dyno too see the hp🔥🥶

[@mixonmachines]

Love the channel 😊😊😊

[@StupidFastJohn]

Ty!!!

[@blacksmokematters4521]

👍👍👍👍

[@Mac181]

Bro u lost a lot of weight keep it up man

[@StupidFastJohn]

Ty bro!! 👊

[@Mac181]

@@StupidFastJohn it’s really cool that you get back to everyone to I really like your show u do with mike top quad you guys should make a pitch to the discovery channel we need a quad and dirtbike show there’s nothing like it out there just imagine wat you guys could do with a big budget

[@chikofiebre]

The crank isn’t balanced to the flywheel you will mess up quick

[@timothylong68]

I actually think I learned something from this video lol

[@StupidFastJohn]

Bout time 😉

[@timothylong68]

NGK spark plugs?

[@StupidFastJohn]

Yes br8es thats what i used to run now i run a better ngk plug (cant remember off the top)

[@SaveTITANFALL]

omg do you workout ? ur arm are big af

[@StupidFastJohn]

I pick zee quadz up and put zem downz 👊

[@lunaticgarage4082]

I think your flywheel is tight enough bud🤦🏻‍♂️

[@StupidFastJohn]

Negative that impact is only 65 ft lbs. yamaha calls for 150 ft lbs. But thank you for eyeing it up for me 👊

[@Mac181]

O can tell of the first rip you did you were jumping out your skin nothing better when a build gos rite and it rips

[@Mac181]

I’m tell all my boys to subscribe if there not already

[@StupidFastJohn]

Ty bro appreciate you 🙌

[@Mac181]

@@StupidFastJohn no doubt man I’d love to help out on a ep of top quad and hang with you guys for a day lol

[@austindorris7066]

Bro why are you not wearing gloves while welding? Must not care about radiation burns

[@dewey1994]

If u would have broke these off in different videos it would have got wau more liked and views

[@StupidFastJohn]

Well the first time i posted this it got double the likes and triple the views in 12 hours. I thank youtube for that and theyre "tech issues"...