I fail to understand when I see dislikes 🤷🏻♂️This video is one of the most helpful videos so far 🥇🏆🎖
@guisso019 жыл бұрын
This saved my life Vick. It gave the same message after I did your procedure , but i took the tank out then replaced it, then it worked. Thanks a whole lot for your info.
@katiewright78945 жыл бұрын
Didn't have to change ink collector tank! Just did this procedure and then turned off and turned back on and now back on the ready as mine kept saying replace ink collector and wouldn't do nothing! So this saved my life!! Thanks
@DjJanR7 жыл бұрын
Followed your instructions on my sawgrass 400, and it worked perfectly. Saved my ass until my replacement-tank arrives. Thank you.
@simonlewis26925 жыл бұрын
flipping great - with the help of some comments below re 5 secs rather than 15 - saved my bacon on a remote croft in the Scottish highlands days away from any chance of a new tank - Thank You!
@chyldematias2177 жыл бұрын
Thank You! Iast night I had an order for two mugs but my printer had a message about replacing the ink waste cartridge. I started searching for a replacement but price is high everywhere I searched, also they sell just the chip to "cheat" the capacity it can hold but I came across this Video and You nade my day.. worked as described.
@JudgeMeUnforgiven3 жыл бұрын
Thank-you i have washed my sponges out from my tank, and re-set it three times now :-)
@condesystems3 жыл бұрын
Excellent!
@rmraines3 жыл бұрын
You've literally saved me during school awards season 😭🙌 Thank you!
@condesystems3 жыл бұрын
Hello R.M. Raines Thank you for supporting our channel. We are glad to hear that our video helped you out. Please let us know if you have any other questions or issues that we could help you with.
@micbak20006 жыл бұрын
I can confirm this works with SG2100n too. Thanks
@ongikong9 жыл бұрын
I can't get the "Ready" status. There's only the red light and my LCD panel says: "Replace Ink Collector Unit" and "Used Ink collect Unit is set". What can I do?
@lupesuffle16388 жыл бұрын
I'm having the same problem, is there a work around?
@theresatrentham74246 жыл бұрын
saved me for the night. gonna order a spare just in case for next time. THANK YOU.
@RoyFoord5 жыл бұрын
I have the Sawgrass SG800 - also has trouble getting into the Service menu, but because I had the replace in collector unit message. If you keep holding the up and down buttons for a few seconds and pressing enter then doing it again, it will get into the menu just try various methods. Once in, I followed the steps and it works a treat. Thanks
@fatonagolli3 жыл бұрын
Great video very helpful, SG800 only need 5 seconds
@condesystems3 жыл бұрын
Glad it helped
@melissajohnson29352 жыл бұрын
Holy jeez this was a tremendous help!
@condesystems2 жыл бұрын
Let us know if you have anymore questions or issues! We love to help.
@AndyGadget3 жыл бұрын
Well that's 25 quid saved after clearing out the tank (different video) and resetting the counter. Many thanks.
@condesystems3 жыл бұрын
Excellent we are glad to help!!!
@nailtech4years7 жыл бұрын
I have the sg400. My display said Waste collection unit not set. I tried the15 seconds but it did not work but 5 seconds did. I restarted the printer and the display for the waste tank was empty but then I got the waste collection unit not set again so I reset the waste tank again and got another error message sc (84000) call service if this happens again, Power off on. All set now.
@skabbymuff1113 жыл бұрын
Thanks for this, got me out of a tight spot!
@condesystems3 жыл бұрын
Glad it helped!
@webtrekkeruk24876 жыл бұрын
Great stuff. Worked a treat!
@oldschool77435 жыл бұрын
Thanks, Vicky still working in 2018
@nigelgregory31427 жыл бұрын
Thank you Vicky that worked perfect for me! Just a note mine is a Ricoh Aficio SG7100DN Printer with the 28212 Error Code. Works perfect now. :D
@waynemumford48675 жыл бұрын
Thanks guys .Now my printer is working again . I had the error message ink collector is set replace unit .
@BaniBands9 жыл бұрын
Vickie you rock- thank you!
@Carlostrowbridge6 жыл бұрын
Very good. I done in my Ricoh worked well. Thank You.
@nelsonbellamy37786 жыл бұрын
This was very Helpful thank you V
@VolkerSt10 жыл бұрын
Hi! Very nice Video. I have a question: Is it possible to reset the adminpassword for the Webinterface? I am using a SG2100N. TY. Regards Volker
@condesystems10 жыл бұрын
We don't think so, however we have never seen a SG2100N, contact Ricoh or your supplier.
@stephensill549510 жыл бұрын
Saved. My. Life! Great help. Thanks!
@joelbenedict886810 жыл бұрын
Got into service mode, only had to hold up and down for five seconds on the dnw version. Is there a way to trick the printer into thinking the color cartridges are full? I only use the printer for black monochrome printing for notary business. It's over $120 every time I change out the color cartridges, and the ink cartridges keep depleting due to auto maintenance.
@condesystems10 жыл бұрын
Not that we know of.
@bastikpoint80817 жыл бұрын
Get a small cheap laser printer! There is no way to get to what you want. The printer needs ink in all four colour to run proper and for cleaning runs.
@virimedia98125 жыл бұрын
Thanx a million now good to go
@modoodle18512 жыл бұрын
Hi. Could you please help me . I have a sg 2100 printer and having an issue. When turning on the printer it is stuck on waiting ... And it keeps cycling like it's doing a head clean and doesn't stop . Keeps sucking the ink . (Printer Was in storage for a year ) Any ideas on what to do ? Thanks
@condesystems2 жыл бұрын
Please contact us at support@conde.com
@GeminiYousuck8 жыл бұрын
if the ink cartridges are expired will it read low ink? redlight is coming on to
@condesystems8 жыл бұрын
Not expired, only dried out or depleted.
@8mu_u9 жыл бұрын
Hi Conde my printer is SG 3110sfnw it's display"Use ink cartridge C M I got help from my friend has the same model , we replaced the two cartridges above from his printer in mine.It is still show the same message. Is it a condition to replace all set? Thanks.
@condesystems9 жыл бұрын
+مصطعى المدريدي His cartridges may not be full or your lines may be clogged. Please contact Ricoh.
@annaiori38118 жыл бұрын
Thank you Vicky.
@affaniyassine64593 жыл бұрын
Thank you so much.
@condesystems3 жыл бұрын
You're welcome! Thank you for watching!
@robertdigital28584 жыл бұрын
Thanks alot.
@justinjns1118 жыл бұрын
excellent got me out of a pickle thank you very much
@aroyar69683 жыл бұрын
Hi can you share how to make that with SG 1000, thank you in advance.
@condesystems3 жыл бұрын
Please contact our technical support at support@conde.com.
@tiagomonteiro26788 жыл бұрын
Hi, I'm trying to get on the first step but my printer has the red light lid already so it does not go into service mode when I press and hold UP and DOWN arrows...
@condesystems8 жыл бұрын
You can still enter the maintenance menu with an error message on the screen. Make sure to hold the up and down arrows together for 5 seconds (If you are longer than about 6 seconds or shorter than about 4 seconds it will not work), Then let go and press the enter key. That will get you into the menu.
@tiagomonteiro26788 жыл бұрын
Thank you for the kind help. Ist's sorted and it worked! I was missing the enter button after pressing up and down arrows for 5 seconds to enter service mode. It would be great to be able to do the same thing to cartridges levels... : )
@ddeweypink3 жыл бұрын
Will these numbers be the same for the SG400
@condesystems3 жыл бұрын
Hello Deb! Please contact our technical support at support@conde.com and they will be glad to assist you!
@mauromauri12023 жыл бұрын
thanks good video
@condesystems3 жыл бұрын
Glad you liked it!
@GeminiYousuck8 жыл бұрын
What does ink depleted mean and used ink cartridge mean? I also have a red light on. I took the cartridge out and shook it and seems to still have ink in it. If you can please respond back I would greatly appreciate your help :-)
@condesystems8 жыл бұрын
Ink is clotting or chip is bad in cart.
@jayeshbrahmkshatriya67197 жыл бұрын
Hello! My Ricoh 3110 printer says that "Replace Ink collector Unit" "used Ink collector is set" what to do? It also shows Red light as well... Please help....
@condesystems7 жыл бұрын
Buy an ink collectr unit: dyetrans.com/details.php?item_no=405783
@jayeshbrahmkshatriya67197 жыл бұрын
Conde Sublimation is it available in India?
@condesystems7 жыл бұрын
Probably not, try ebay or contact Ricoh
@Brujas19778 жыл бұрын
Hi, what does it mean VPV4 DEVMODE error 1 when I send to print appears that
@condesystems8 жыл бұрын
I am unfamiliar with this error but it appears like the printer might not have exited the service mode. What does the display say before you print?