Рет қаралды 197,087
Brian Eslick from How to Automotive www.howtoautomo... takes you step-by-step through the process of resetting oil change required light on a 2015 Ford Escape.
1. Without starting the engine, place the ignition in Run.
2. Simultaneously apply the accelerator and brake pedals and hold them in the fully applied position.
3. After 3 seconds, the message center displays SERVICE:OIL RESET IN PROG.
4. Continue to apply both the accelerator and brake pedals.
5. SERVICE: OIL RESET IN PROG message disappears after 25 seconds and the SERVICE: OIL RESET COMPLETE is displayed.
6. Release both accelerator and brake pedals.
7. Place the ignition in OFF.
8. The oil life reset procedure is complete.
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomo...
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.co....
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive #AutoRepair #BrianEslick