Girlie here and I'm gonna try to change oil for the first time in my life using this guide 🤞🏻
@valerie8634 ай бұрын
Fellow girlie I used his video to the t and successfully changed my oil lol
@idleoutcasterАй бұрын
Another tip from no one: Remove dipstick and oil filter and oil cap to let air in and ensure more old fluid is removed
@igneousrock42962 жыл бұрын
Thank you, Brian. You are the first video out of 5 that I checked, that explained the correct procedure for resetting OIL LIFE. The other people say hold the gas pedal and brake to the floor, which didn't do anything for my 2017 Escape with 1.5L engine.
@Top-G352 жыл бұрын
Great video straight to the point no waist of time
@EliWaters-rc6rq6 ай бұрын
First of all, Great video quality! Much appreciated! I’ll be subscribing! Second of all, I like your humble honesty (wheel chocks, eye protection etc).
@regsparkes6507 Жыл бұрын
I have a TIP for you, next time you want to pour the oil, try holding the oil bottle ( jug ) with the spout on top, i.e. 12:00 o'clock. This way it will let air in and oil will pour without slopping it all over.
@BrianFischer Жыл бұрын
Thanks Reg!!
@regsparkes6507 Жыл бұрын
@@BrianFischer I saw this being done by an older mechanic many years ago, and (I use it all the time, without spilling a drop since. :)
@emptypocketsguy8 ай бұрын
Yeah I gotta from an old guy in the early 90s. Never fails.
@regsparkes65078 ай бұрын
@@emptypocketsguy I'm that 'old guy'...hahahaha!
@TheJawtech5 ай бұрын
Great video, I just wonder if the wheels chocks you used would do anything other than slide away. Those oil containers are made to be poured while on their side.
@Tommyjet182 жыл бұрын
My 2019 has the oil filter positioned vertically, which is nice.
@ethandupit732 жыл бұрын
Same with the 15
@danhallas35462 жыл бұрын
Awesome! When I first saw this video I was a little annoyed when I saw the filter all the way up in there and sideways! I was trying to locate mine from the hood side and only noticed something hanging straight down not sideways like this gentleman’s. That would explain why lol
@Top-G352 жыл бұрын
No that sucks 😂, I hate when I have to touch those vehicles oil always gets on my hands 😂
@sahusmc5850 Жыл бұрын
Thanks for the help straight forward to the point good job man 🤘🏼
@edgarballesteros7505 Жыл бұрын
Great tutorial it seems simple enough thank you for the video it helps a lot
@davidterry919 Жыл бұрын
Good job , that filter is a pain to get all the way out from the top or bottom.
@majorpayne164 Жыл бұрын
What are the part number for the screws that hold the bottom cover on? They are not listed in the description. Thanks.
@emptypocketsguy8 ай бұрын
Youre the man, B! 💪🏽🏆🙏🏼
@hopper3332 жыл бұрын
Hi. I'm not sure if this is your Escape, but I'll ask anyway. I am looking for a phone mount for my 2019 Escape. Do you have a good recommendation? Thanks, Eric
@jbrizzle79792 жыл бұрын
They’re the best IMO
@jeffpaxton91722 жыл бұрын
It's funny how the under carriage shields are too flimsy to provide any real protection and they don't help with aero either because they only cover the engine not the whole car. Ford wont admit it but the shields real purpose is to catch engine oil leaks before they land on your driveway. I guess they gave up on building an engine that doesn't leak. LOL
@muniz27 Жыл бұрын
I'm pretty sure that, as the name suggests, splash guards are meant to keep splashes from making a mess in the engine bay and keep it a bit cleaner. Unless they're made from metal, that's the only purpose they have, regardless of the car brand.
@JoseGonzalez-ew6zz5 ай бұрын
Better gas mileage from smoother airflow under the vehicle
@jasonborntrager96655 күн бұрын
Na like he said they're too flimsy to actually protect against water and they actually do hide the oil leaks
@jaymealann91018 ай бұрын
I feel putting the car in neutral just adds more risk. Just leave it in park.
@Maine2point06 ай бұрын
I was wondering what was the point in that
@njsongwriter2 ай бұрын
The jack stand should positioned near the front of the car. They are safer than a hydraulic jack. Also. this video is not for all Ford escapes. There are 3 different engines on the 2018 model.
@stevensevek61517 ай бұрын
Which engine is this? It doesn't say in the title.
@petemahon59072 жыл бұрын
Word of recommendation. Don’t use the old oil on the filter’s gasket. Use the new oil you just bought for the oil change. In the long run, it might not make much of a difference, but it’s more of a mindset. Why put dirty oil with possible metallic particles in it onto a piece of rubber that makes direct contact to a machine that vibrates?
@kenw222519 күн бұрын
That's how I've always done it. But just cause new oil is more pleasant to touch. Otherwise, seems irrelevant
@petervarga4592 Жыл бұрын
Hi Brian, I see you used 5w30 oil. Is it recommended by the dealer or the user manual? In my user manual 5w30 is recommeneded but all the dealerships recommend 5w20.
@BrianFischer Жыл бұрын
Really, _any_ oil will work. You can use 10W30, 0W30, etc. 5W30 I believe is what is recommended by the manual. The dealership in your area may prefer 5W20. Oil preference can depend heavily on the climate in your area. For example, in a hotter area, like Arizona, you may want a thicker oil since the heat will make it "thinner", vs. in a colder climate, say Alaska, you may want to start with a thinner oil since the cold will make it "thicker," if that makes sense. For all my cars, I've always stuck with either 10W30 or 5W20. Ultimately, your call. 5W30 vs. 5W20 won't have a huge difference.
@petervarga4592 Жыл бұрын
@@BrianFischer Hi, Thanks a million. So it's not big deal then. I have been thinking about it a lot but now I stop worrying about it. (I thought I made a mistake using thinner oil.) Thanks again and thanks for the video.
@davidturk6170 Жыл бұрын
Usually the oil specification is on the filler cap, e.g., 5w-20, etc.
@petervarga4592 Жыл бұрын
@@BrianFischer Thanks a lot.
@newfie-dean58034 ай бұрын
Follow the manual. The manual even specifies what oil to use if you live in a very cold climate. If you live in a normal climate use 5W30 as specified.
@kennywilberding90233 жыл бұрын
Ok
@johnaxta10082 жыл бұрын
Thanks for the great video. Can you let us know the point in the car that you set the jack in the center to support and lower the car. Been trying to figure out a good spot to support the weight.
@BrianFischer2 жыл бұрын
It's technically not a jack point I don't believe, but if you move the splash guard off, you'll see a part of the frame that looks to be safe to put pressure on. Just be very careful with the contact points the jack is making.
@johnaxta10082 жыл бұрын
@@BrianFischer thanks for the reply and info
@sharonday2027 Жыл бұрын
Would it be ok to use ramps instead of jack stans??
@gp91648 ай бұрын
I prefer to use ramps when I’m under the car. I have a 2017 escape and the ramps work great for an oil change. I use Jack stands for anything with the wheels or tires ofc. It’s nice to have both options at home.
@stevensevek61517 ай бұрын
Of course. Don't be silly.
@joshgrissom2 жыл бұрын
Where’s the link for the spare screws?
@vincentramirez81885 ай бұрын
The difficult part is having the right tools
@kenw222519 күн бұрын
Cars have a jack inside. Can buy a jackstand and filter wrench pretty cheap. Likely save money by the 2nd oil change. But more importantly, you can trust it was done properly granted using the jack that comes with vehicles is a pain to crank and slow
@Purvysage Жыл бұрын
Could anyone tell me how much I should expect to spend if I wanna buy everything he recommends to use
@BrianFischer Жыл бұрын
Everything is linked in the desription.
@TheDunestrider Жыл бұрын
The oil bolt is metric. Voted down.
@BrianFischer Жыл бұрын
I bet you're a joy to be around in person.
@kenw222519 күн бұрын
This is merica. Metric can go back to china
@SuperWally817 ай бұрын
Your coolant level is very low!
@BrianFischer7 ай бұрын
That's because it was in the radiator...
@Fatboy533 ай бұрын
What engineering idiot put the filter there??!! Just did my daughter in law Escape. Why I only buy Toyota/Subaru. Great vid but another reason I never buy found on road dead FORD
@charley124 Жыл бұрын
No size of cover screws ? no size of oil pan nut ? Thumbs down on this video - start over and loose the music would help.
@BrianFischer Жыл бұрын
I'd recommend: 1. You slow down and read the onscreen instructions. 2. You get a full-size socket set, preferably in both SAE and Metric. 3. Get spell check. If you can't take a minute to read what I put on the screen, this job might be too complex for you. I'd hate for you to forget putting oil back in the car and then trying to run the car.
@ringmaster627 Жыл бұрын
Who designed that shitty spot to put the oil filter 😂
@TheDunestrider Жыл бұрын
The engineers at Ford designed it. They laugh and laugh around the water cooler about the trouble people go through to change the oil filter.