Resetting HVAC in Freightliner Next-Gen

[@chyannamonroe7481]

Idk wtf I’d do without KZbin… thank you sooo much

[@robertcethridge]

I know right ,I have been taken by so many people until I started youtubing

[@xavieredwards9311]

i said the same thing this just helped

[@bensamuels4401]

Yep worked like a charm. Thanks a lot! FOR THOSE OF YOU WHO ARE SEEING THIS AND CAN'T GET IT TO WORK: Step 1. Set all dials to where he showed you INCLUDING the ones in the bunk. Step 2. Turn truck off and leave key facing up and down (not tilted either way). Step 3. Cut the trucks connection to the battery with the switch on the ground at the back left corner of your chair. (Give it about 15 seconds before reconnecting) Step 4. Turn key one click clockwise and then hold both buttons like he showed you. (Keep holding for a little bit even after they start blinking). Step 5. Turn your truck on and cross your fingers. :)

[@DDTruckDriver]

Thanks Ben for the added insight.

[@bensamuels4401]

@@DDTruckDriver No prob, Bob. Hah i tried it like 10 times and finally got it to work. Definitely a life saver.

[@xxxbigboidraco]

Does it work right away? Mines blowing even hotter air now

[@bensamuels4401]

@@xxxbigboidraco it might take a couple tries

[@tonyb1315]

Didn't work for me I'm dying here in Cali

[@33mendoza1]

Thank God for your video I used my defroster and wouldn't stop blowing hot air this fixed it for free you're awesome man God bless you

[@DDTruckDriver]

Glad you are back to normal AC operation

[@petechairez1345]

If the sleeper thermostat stops working open the closet, unplug the thermometer plug it back in and it will work again. This is not for the bunk heater. This is for the air conditioner controls in the sleeper.

[@mr.k3676]

Amen. Thank you for this. I run a team truck and the a/c was not blowing cold at all. Followed your instructions and now I need some long Johns on. Thank you brother.

[@tonyb1315]

How long to leave unplugged I'm in Cali and I'm baking to death only.blowing hot air it was working fine before

[@petechairez1345]

Quick unplug and plug in works good for me with the Power on

[@andrewrdean160]

I've had to use this fix 2 times now in the bunk. Thank you for your comment!

[@petechairez1345]

I’m glad my comment under this KZbin post was helpful I know how it is out here.

[@_AlejandroGonzalez_]

Your a hero dude. I’m in El Paso for a 34 hour break and my sleeper controls would only control the front ac but nothing would change in the sleeper. I tried this and now it works fine.

[@agrsvbutterfly]

2020 cascadia here, we had to turn our truck off to get this work but it made the world's difference! Hot air in the bunk, cold up front, that kept shutting down our smart idle randomly at night. I was all but ready to rip the controls off the wall lol so glad I found this video!

[@DDTruckDriver]

Awesome, stay cool! And Subscribe to help us out. Thanks

[@dannyflemings864]

I'm having similar problems I think is you had. I reset the front part of the truck and it's blowing cold air. But my 2021 cascadia the sleeper control will not blow cold air and it keeps on blowing hot air no matter if you turn it off. And I can't idle the truck because it shuts off and you wake up 150° any suggestions

[@agrsvbutterfly]

@@dannyflemings864 using this trick worked for ours to fix the bunk blowing hot but the truck had to be off. When we set the opti idle to interior comfort it would cycle through a few times then never crank the truck again so we'd wake up just baking in there. I never figured out how to fix that, I'm sorry.

[@andyk3663]

Thank you so much for making this, my ac stopped working today and was blowing heat. I tried this and now it blows cold again! 🎉

[@flex407]

It worked for me! 2020 freightliner cascadia. Turn the truck off, turn the key to the left. Hold the buttons until it flashing. Start the truck up. Cold air. Amazing 👏

[@tonyb1315]

Hold what buttons?

[@Eli5047]

@@tonyb1315 the ones in the video 🤣

[@thetawave2473]

Thanks, he forgot to say that part

[@francofigura6847]

Bro, thanks to your vlog. It helped me & it works on 2019 Cascadia. It was stuck on defroster vent & wouldn’t blow any where else. Thanks again 😃🤙

[@zmejce14]

Hit a big crater hole on the highway and my heat stop working. Pull over watch this video and worked like a charm....Thanks man

[@floridasickboy]

Good stuff. Fixed the problem. I thought it was going to be something big $$$ to fix. Now it’s working like a champ. Kudos bruth

[@DDTruckDriver]

Kudos are what you find in our videos, subscribe for more!

[@ramsespolanco7334]

This just happened to me first thing morning in a 2020 Cascadia. It worked. Thank you, you're a life saver in this Florida heat! 😎

[@DDTruckDriver]

You are not the only one, that is why we made this video!

[@Mrjoseph23]

Thanks it worked on 22 freightliner was up in here sweatin bricks looking for a vid to solve this issue. I appreciate it G 👍🏿

[@Railer61]

Once I saw it was engine off in accessory, I did this and got me the cooler air I needed. My system was trying to roast me outta this truck

[@ditanta11]

Much appreciated The truck needs to be off and I had to have the truck key turned to the left while having those buttons pressed. Now freezing air finally blowing in sleeper too not just upfront. 👏👏👏

[@robertcethridge]

Wow

[@shapegifter1637]

Thank you bro, you make work for me

[@atwei21]

In a 2024 cascadia I had to have the key in the on position without the truckk running for this to work. THANK YOU!!

[@eac5574]

Thank you sir u saved my life out here in cali with this heat

[@scottsteinmetz9682]

Subbed, this totally worked and I wish I would have found it last night instead of this morning lol. Thanks man, life hack for the day!

[@DDTruckDriver]

Glad it worked, subscribe for more life saving life hacks!

[@Eljewel01]

I'm surprised. It actually worked. My problem was that the sleeper was stuck on heat. Thanks!

[@xd-oy5pr]

Worked 4 me 2024 cascadia, thank you

[@ronnierocha9894]

This video should had a million thumbs up 👍

[@jesnypaul]

Very good i have try it

[@Lado1677]

You need to say that we must shut the truck off, turn the key in ON position and then do those steps

[@bigdave5810]

I had nothing but full heat up front. I was about on fire. I tried to do it with the truck running and it did not work. I turned the truck on and just turn the key onto accessory. Then did the steps you showed and it fixed it. Thank you

[@kevintaylor954]

Worked perfectly! Thank you!!

[@LarryB]

Worked for me in 2023. It's 11f outside and my truck was blowing ac out the front. Thanks!

[@ehicks8877]

THANK U THANK U THANK U !! it works and now can comfortably take nap w/o doing Fast&Furious stunts w the truck!!

[@Aardvark892]

Worked! Had cold cold ac up front but only hot air in the bunk. Now I can go back to sleep in a cold bunk! Thank you!

[@DDTruckDriver]

that is what we like to hear!

[@gumbygrom8436]

@@DDTruckDriver mine too thank you sir

[@Brooklyn_Powers]

Worked perfect! Thank you!

[@lajonapowell]

IT WORKS THANK YOU YOU SAVED ME FROM THE HEAT ❤❤❤❤❤❤❤❤❤❤❤❤

[@gumbygrom8436]

Thank you brother took a couple tries now I have bunk ac

[@207mphgtr]

Still valid on '23 model! Much appreciated! I'm rolling along it's 100F in this B... bout to pass out , looked it up. Worked perfectly! ✌🏼🥶

[@garryeadon9962]

Mine isn't working, does key need to be off or on or running

[@PsyberMind]

Love it! My bunk was blowing cold, but the cab was red hot in 90% humidity here in Kentucky.. I was cool laying down, the moment I sat up I was melting.. Followed this trick and now I’m getting to sub-zero temps up in here, which I prefer.. easier to remove a blanket/sheet than it is to try to maintain a comfy temperature without them.

[@Detrickkeys]

Bro potentially just saved my life🙌🏾🙌🏾

[@Po_Factu_7]

Thanks you so much brother !!!

[@snapmalloy5556]

Find the fuse and pull it and put it back in. Quicker and easier and works every time.

[@elianreinoso6196]

Wow amazing ty so muxh us 10 22pm my freightliner been acting hot since 2 days ago i am litterly sweating so bad parked in alabama is 103 degrees and i coulnt take any more ty so much

[@Vish-f8t]

It works even though I did it while driving.Thank You 🙏

[@shukhratkhikmatillaev7903]

What position do engine off or start

[@valeriyreval1831]

Thanks man!

[@redstandsout3386]

Very helpful. Thankyou!

[@dracogabe873]

Thank you so much, youre doing the Lords work 🙏

[@cristorobert7235]

Woohoo. Thank you. Be blessed.

[@alimac114]

Thank you

[@davidclick5705]

Holy Jesus! thanks great tip

[@hobby278]

Thank you ❤

[@kenschieber1]

I found the blend air actuator had popped off of the housing allowing the blend air door to not function properly. I got the actuator put back in correctly and all is functioning properly now.

[@sean5331]

Great thanks work for me

[@SinghAmarjit47]

Thank you man. Appreciate

[@GursewakSingh-vz5ij]

Mine does nothing when i press buttons

[@TheKingOfTheHill]

Turn engine off and leave key on the on position then do the steps he said. This worked for me

[@aronstrugar1490]

Wow it worked for my 2018 thank you

[@NoLimitZach]

Worked, thanks!

[@DDTruckDriver]

It seems to work everytime :) Subscribe for more things that work :)

[@Omar-nn9jy]

Thank you so much

[@TruckingWithSteffon]

Hvac got stuck on high heat. Did this and it worked like a charm thanks!

[@DDTruckDriver]

We are all about charms! Subscribe for more charms!

[@608trucker4]

So after I did this it worked for 3 seconds then quite working again. Where would I find this actuator

[@BigguyfromUtah]

Dude, you just saved me from being steam cooked in my truck.

[@DDTruckDriver]

Haha yeah buddy that is what the channel is for, life hacks to make all of our trucking lives easier

[@crazymoon61]

Work great! But it only lasted about 45 minutes, I've had to do it 4 times and it keeps tripping, any ideas?

[@watsonwatan3575]

Magically sir thanks 🙏

[@anthonyjames9745]

This worked for me thanks.

[@carmenperalta7207]

Thankyou, great helpful video..!! You, learn everyday something new..very helpful video.

[@offtop69]

Thank You BIG TIME!!!

[@amauris1522]

The truck has to be in park? I was trying to do it while running but didn't work. Thanks for your videos

[@alexi9631]

Thank you!!!!

[@nirmalsheoran9056]

Thanks a lot buddy 😄

[@Blacklabels686]

Was worth a shot. Those steps worked on 2023 but still poor cooling. Can pressure is good among. Just don’t get it. Blend door could be broken most likely.

[@jazzybaby0720]

Thanks it worked asap!

[@Joemanz703]

Thanks man!!worked

[@alansarkis9034]

Worked great thanks

[@DDTruckDriver]

Fantastic, give us a subscribe if you would please???

[@ravipatel-fq9fu]

Thank you sir Your video helped

[@biker97023]

Worked perfect thanks!

[@DDTruckDriver]

Awesome, go ahead and give us a subscribe for more perfect videos.

[@steverobertson1729]

The issue im having is AC wont consistently run to keep sleeper AND cab cold (team truck, so both need to be working simultaneously) When it does work, its FREEZING us to death, but then after a day or two into our work week, it will quit working, either in sleeper or in cab. Sometimes both. Resetting the truck (turning off, waiting 20-30 mins) SOMETIMES works. Filters are clean. Gonna try this next.

[@DayTrading-lessons]

Mine truck AC wasn’t working when truck stopped and reset according you n it’s working now … 👍🏼👍🏼

[@akmalyuldashev3936]

Good video mine worked....

[@michaelmishler6492]

Hello. My buddy has a 21 freightliner. His cab ac works good but his apu powered bunk ac blows warm. Any idea how to reset that?

[@guajon1]

Works for me. Thanks

[@TheHailacopter]

Thanks, DD, my truck is no longer trying to smuffacate me.

[@skylerdroubay8209]

We are anti-suffocate! Glad it helped!

[@al78582]

Is there a way to reset the HVAC for a 2015 Peterbilt 579 is it the same process? thanks

[@traceycollins4486]

Should yellow light be on or off while running ac

[@raymuncy22]

Saved my 🥓 . I had to make sure my engine was off and key in accessory. Thanks!!

[@DDTruckDriver]

It is funny how some of these trucks act differently. Glad your bacon is saved. Consider subscribing if you would and the next bacon saver will be sent to you when we post it!

[@Gtflybmx75]

It’s works on the brand new 2024 cascadia

[@judecharles2017]

My ac works fine but in the sleeper when I turned off the engine the park smart doesn’t blow cold air. I have to keep the engine running if I want the bunker to get cool while sleeping. Any idea on how to fix that??

[@DDTruckDriver]

Are you using optimized idle?

[@GirlDadx5]

This worked for my 2015 Cascadia. But I'm totally confused. My AC worked for over a year without any issues. Now I'm resetting it every time I turn the truck off. Any idea why it might be getting stuck all of a sudden? Thank you.

[@jesseostone386]

Can’t tell, even when reading some comments. You didn’t say as part of your instruction. Key turned to right or left? Engine on or not? Details matter. Guess I’ll have to experiment.😕

[@gurpreetbilling6911]

Next gen cascadia little heat from vents but windows fogging in rain and blowe cold air on defrost mode Heater core is hot no leaks Any solution

[@JoseGarcia-lj6yz]

Hola que tal una pregunta cuál es la función de el color azul y verde en el botón

[@TheKingOfTheHill]

Verde es normal, azul es económico. En otras palabras no hay diferencia.

[@DDTruckDriver]

el verde es el modo económico, lo que significa que a veces hará más calor. El azul hará que se mantenga frío.

[@loganpolley7767]

For some reason my air smelled Luke barbeque right after doing this. Not sure if it really helped much in optimized idle comfort mode on the bunk will blow some heat in the bunk when set to do so by when you turn it to ac it continues to cook me until you turn it off and start again max cold. Then it blows semi air more like a fan

[@DDTruckDriver]

If your air smells like barbeque then you should be teaching us how to do it. I would love it if my HVAC smelled like bbq #smokedmeatsforlife!

[@flowergurl0575]

What if I’m having issues with the sleeper berth ac controlling my ac on the in cab? How can I reset so that the knobs in the sleeper berth only control the back and the front (In cab) only controls the front temperature?

[@essjay943]

What do I do if my dial lights aren't working.?

[@DDTruckDriver]

Shoot different issue there I assume. My first guess would have been to try this.

[@essjay943]

It wasn't connected properly so it was a shop issue.. So nothing was working 😅 I got her running cold now.! Thank you for the video, I know for next time.! 😁

[@TheKingOfTheHill]

I have 2021 Freightliner, I had to turn engine off with key on on position then reset.

[@DDTruckDriver]

Some trucks are that way, funny how it goes. Thanks for the input. Try both, key on engine off and key on engine on.

[@josephdecker2314]

Does the truck have to be on or off to do this?

[@DDTruckDriver]

Key has to be in on position, I have had it work both idling, driving, and truck off but key on.

[@orpheus1662]

Dude you are F awesome.

[@StygianBlood]

Holy hell thank you....that does more than just reset that door.....my truck randomly has issues where it'll just stop blowing cold as if you just turned the blower on and it unfucked my a/c

[@DDTruckDriver]

Glad it helped!

[@TheAmericanUhate]

Mine just randomly started this same issue tonight. It's on and working, then the lights go out and the cold air turns to ambient temp air, which is hot lol. This reset is working so far, hope it stays

[@TheTruelakersfan]

Did t work on my 2020 freight liner cascadia

[@ricecakeFTW]

Thannnnnnk you!!!!!!

[@itsKeMonte]

Yo this actually worked for my 2020

[@DDTruckDriver]

That is great! Like the video and subscribe!

[@pilotmiami1]

Super

[@DDTruckDriver]

Hope it helped, thanks for the subscribe and like?

[@iPhoneBlaga]

Truck has to be off ? Stopped ?? Doesn’t really help for team on the fly, that door gets stuck on hot and start dying while sleeping

[@DDTruckDriver]

In my experience, you can be driving down the road or sitting parked. Key definitely has to be on though.

[@xxxbigboidraco]

Currently me dying rn lol

[@moosc]

Can't be driving engine off key turned on.. previous generation you could have done rolling reset

[@arpinderbhaati467]

my bunk blower always going full speec automatically while i am driving. can somebody please help

[@sonic505050]

Any idea how to reset the radio when it freezes up?

[@skylerdroubay4782]

Only had that happen once, I think in the end it was a defective radio. But I think the power kill switch to cut off the batteries helped.

[@Countrygalaprilyoung]

Does this actually stop the front from controlling the back and the bunk controlling the front?

[@DDTruckDriver]

Well none of this takes control of the front or back, the only time your front/back might seem "controlled" is when it is in optimized idle

[@curtcmiller]

@@DDTruckDriver what is optimized idle?

[@DDTruckDriver]

@@curtcmiller This is: kzbin.info/www/bejne/mHuYqIaLjKxknbc