Resin Doming Tutorial

For more resin tutorials, check out the playlist • Resin Crafting Tutoria...
Adding vinyl to your resin pieces can really set your projects apart from others that have a similar shape or color scheme. In this video I'll show you how to apply and seal vinyl onto resin pieces.
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support, I truly appreciate it!
Resin: artnglow.refr.c...
Respirator mask: bit.ly/3OWxT58
Gloves: amzn.to/3qr5Zno
Heat gun: amzn.to/3IWBaxt
Silicone Mat: amzn.to/3gb2zKw
Mixing Cups: amzn.to/2Q2FL5e
Doming mat: amzn.to/2CFFMZL
Printable vinyl: amzn.to/2Q5NZto
Permanent vinyl: amzn.to/34ems1i
Cricut for vinyl cutting: amzn.to/3iUD3Lv
Like my lighting in this video? Here's what I'm using:
1. Neewer Ring Light: amzn.to/2JsERd5
2. Emart Soft Boxes: amzn.to/2I0xmdV
What am I recording on?
Camera: amzn.to/34dIgda
Tripod: amzn.to/2YaTQlp
----------------- S T A Y C O N N E C T E D ------------------
www.clevergirlscraft.com
IG: @CleverGirlsCraft

[@CleverGirlsCraft]

Below are the links to all the other videos in this resin course: Intro: kzbin.info/www/bejne/o4qqpGZtq8h7rK8 Workspace essentials: kzbin.info/www/bejne/sHXTlax-rt2epac Mixing and curing: kzbin.info/www/bejne/oH2ao6RpiruEp9k Molds: kzbin.info/www/bejne/lXmpc5xnramNhNU Color Techniques: kzbin.info/www/bejne/h17PdpKYqrtqpdk Mica brushing: kzbin.info/www/bejne/pYOmpndsgKmkpKM Ink Drop Technique: kzbin.info/www/bejne/laquk2esmLOdnas Agate Coaster: kzbin.info/www/bejne/o368Yad-npuop7M Resin & vinyl: kzbin.info/www/bejne/aobYYWmonLCXqLM Inclusions: kzbin.info/www/bejne/h6qsdmaVbduEfLM Assembling accessories: kzbin.info/www/bejne/rprddHSdasx2mJo

[@laraandrews9710]

Girl, you are so worth every minute of my time. These are the best tutorials

[@CleverGirlsCraft]

Thank you!

[@nishantesfaye9637]

Thank you for this tutorial, i am so glad i found you

[@carolinamedrano2355]

Thank you so much, your video is so helpful, I'm way fay of a beginner in this stuff, but I think I'm going to give it a try thanks 😊

[@lizhoward9754]

WOW! These are amazing

[@CleverGirlsCraft]

Glad you like them!

[@joanieturmel-vachon9142]

Hi ! I would like to know something! What kind of printer do you use to print on vinyl ? Can I use the one I have at home or do I need a specific one? Thank you :)

[@dmmenard]

I would love to see a tutorial with your Flair pens!

[@RainorShine1]

I would like to know if we can use the technique using acrylic planes put in a sticker on top of the quillic blank and then domie it with UV resin

[@CleverGirlsCraft]

I actually have a video coming out on this very soon! The quick answer is yes, make sure you sand the acrylic first and leave space around the sticker or decal to make sure the resin has some of the acrylic to cling to.

[@RainorShine1]

@@CleverGirlsCraft can't wait I was gonna use printable vinyl

[@larissagosselin5392]

Where do you get the printable vinyl for the stickers? And how would I cut a shape into it instead of just a circle? (Like an animal.)

[@maryamalhammadi588]

She cut probably using cameo machine or circut

[@coreyhondzinski8097]

Technically, would only be doming if you are using a doming resin. When I add vinyl to the middle of a 1-2" piece using casting resin, it isn't doming. But thanks for the videos, I'm enjoying absorbing the information and watching how everyone else uses resin so I can pick up and pass on as many tips as I can!

[@maryamalhammadi588]

How can I avoid bubbles in the stickers ?

[@kimberlynovak6975]

Thank you so much for this ! You’re a rockstar

[@lisacapers5853]

Where can l get the vinyl sheets from? Beautiful ❤️

[@Kakes6817]

Hi, do you have any videos on how to make epoxy resin dog collar tags?

[@purpledreamer7465]

thank you so much 💕💕💕💕

[@elliew7704]

so cute! thanks!!

[@asiabibi1100]

Can u do without transfer tape

[@theredmaster_superbee]

hello ... I need your help ... have you tried encapsulating a sticker with flexible resin and then trying to stick it on a t-shirt? Can you help me ... to achieve it? ... I would like to make a sticker and put transparent epoxy resin on it ... and encapsulate a sticker of a small baseball ... and then I thought, how could I stick it on a shirt without falls off the first wash? Have you done something like that? Thanks...

[@analili1213]

How did you measure the exact sizes for the circles on to cricut? I'm new to cricut and 8m trying to cut out vinyl shapes of my resin pieces so they fit exact atleast close to the piece. Any advice? Thank you 🙏🏼

[@CleverGirlsCraft]

I measure the diameter of the circle and then input that number into the width field in Design Space for my circle shape. I recommend making it just a little bit smaller so there's a little resin rim all the way around.

[@karlagarcia4002]

What brand transfer paper do you use?

[@babyburr23]

Can you use led/uv lamp?

[@Skyleecombs5084]

When we are coating the top of the vinyl would we used A or B resin . My piece keeps staying sticky!

[@alananiicole]

you still need to mix the epoxy with the hardener. Both a and b together. :)

[@independentsistah]

Okay you rubbed a design on your resin and I like that. Okay tell me what that was that and how do a get a rub off like that? I have some words I want to rub off on a small item I'm creating. Please tell me how to do that part. I have adhesive stickers but I like how you rub yours off.

[@glchild251]

What type of gloves are you wearing. Thanks for the share.

[@CleverGirlsCraft]

Nitrile gloves are all I use when working with resin.

[@fathimailfa9085]

What is an alternative for heat gun ??

[@CleverGirlsCraft]

Some people use a lighter.

[@michaeladkins8294]

COULD YOU DO THIS ON BOTH SIDES

[@CleverGirlsCraft]

Sure, you'd just need for the first side to completely cure first.

[@georgiaserhan8369]

Can i use the acrylic colors windsor ?

[@CleverGirlsCraft]

I use acrylic paint in my resin all the time. Just start out with a little bit and build up gradually until you get the color you want. Putting too much paint in can prevent your resin from fully curing.

[@georgiaserhan8369]

@@CleverGirlsCraft dear another question, i have resin and hardener windsor's are 3/2 and 3/1 ratio ... I actually lost way by calculation ..can you please me help me how to resolve it

[@CleverGirlsCraft]

I'm sorry, I don't use anything other than 1:1 ratio resins so I won't be able to help.

[@Daniel-cr1ou]

What resin are you using ?