How to repair a broken infrared cam on an iPhone X/XS/XS Max/11/11 Pro/11 Pro Max fast & easy

In this video Ben shows you how to repair the infrared cam on every iPhone fast & easy.
⭕Most Tools & Products used are available in our Shop: smartpartstar....
Smartphone-Repair-Group-Germany: / 219354162065623
fixdesk: www.fixdesk.de
Gerät lieber reparieren lassen? Dann einfach kostenfrei zu uns einsenden: www.resq-repai...
Wir arbeiten generell ohne Pauschalpreise im Bereich Logicboard-Reparatur. Wir unterbreiten Euch für jede Reparatur einen individuellen, völlig kostenfreien Kostenvoranschlag. Nach Geräteeingang geht Euch dieser innerhalb 1 Werktag nach Eingang des Gerätes bei uns zu. Entscheidet Ihr Euch für die Reparatur reparieren wir kostenpflichtig, entscheidet Ihr Euch dagegen, senden wir Euch Euer Gerät gegen eine Versandkostenpauschale von 19,90 Euro zurück. Ihr habt also keinerlei Kostenrisiko.
Bei Fragen stehen wir Euch jederzeit gerne zur Verfügung. Schreib einfach eine E-Mail an [e-mail]

[@nathanadams6609]

Fantastic video. Best wishes for the birth of your daughter ❤

[@asdlfkj12jieweo21]

Ich hab gearde gesehen wie du den akku vom Galaxy A3 getauscht hast, wie warum kann ich so ein handy denn erwärmen ohne es zu zerstören? Vorallem wenn ich keine Hitzeplatte habe sondern nur einen normalen Föhn oder halt einen Heißluftöhn? Danke schonmal im Vorraus :)

[@mohammadalmohammad267]

Sir my phone x camera problem and Bluetooth ro wife or face id

[@akali602]

How to fix a broken infrared camera?

[@praneethfernando8431]

first of all i wanna say god blessed to your dougter who coming to the world. stay with them as much as you can bro.

[@ranbo786]

hello bro hop you are fine, bro my iphone11 infra cam flex is ok but the camera is not work in face id issues what should i do i detect that infra cam is not work now what the solution?

[@mayconid]

Amazing video bro, you’re the best, thanks a lot for shared your knowledge with us bro

[@mortezash5787]

Hi Thanks for video I’m from iran I have a problem There is an iPhone, which does not blur the selfie portrait camera and And gives the message move farther also locks the camera when i want add the face ID. In i2c device everything is displayed normally and pass In a program called capture, which is an infrared camera application, it does not show an image and the image is completely black. Please help me What is the problem? Please help me Thanks

[@akali602]

The infrared camera is broken by a strong impact and bend the protective body of the ir camera, is there a solution to this problem?

[@alaster33]

Could i not have just glued it back on ? or use a gentle hot air flow like how it came off ?!? the heat of my soldering iron made the lens come off, i think its was just glued to the back plate, which ended up getting melted glue all over the reflective mirrored inner surface , what a mess ....

[@jahidkhan-ob4hd]

hi

[@jcarolfi]

Thank you for making this video. I have never seen someone so skilled perform this procedure. It was inspiring. I noticed that you have excellent equipment which enables you to do your best. Would you be able to offer me any advice how to find or would you be able to recommend a bench technician in the San Francisco Bay Area who could perform repairs. I think I have the same or similar problem with my iPhone XS. Face ID has failed only a few weeks after installing a new battery. I don’t have the necessary tools or experience to do this repair and I am hoping to find the right person who can. I hope all is well with you and thanks again for making this fascinating and most enlightening video.

[@Undernods]

Tried this method but I end up binding with top ground plate. Recommend scrape method.

[@yahiazakaria174]

Hello teacher, thank you very much for the videos you make, they help me a lot with my work ... I have a question, I want to change the microscope and I looked at yours .... could you give me a little information? thank you very much 😊

[@loche0223]

The video was very good and educational, I tried the same procedure, but unfortunately when you soldered the pads again, 4 of the pins were shorted to ground and the IR camera was damaged, since the upper part is ground also when soldering it joins the pad , it is not a safe procedure or 100% solution

[@tommyjohnson7506]

Where did u learn this skill? And how long did it take u? There are courses that offer 1 week training but i dont believe that is enough

[@aslambhatkar2223]

All the best, pray that you have a very lovely daughter and all the happiness along with her.

[@rifatahmed4659]

Youre a good husband and better tech. God bless your daughter

[@nilsblibalbalba6948]

Was mich mal interessiert, welches Lot benutzt ihr eigentlich. Beste Grüße nils

[@pakistanmobile944]

goooooooooood work thnxx for videos ur big surgeon of mobile

[@telefytelefysson1606]

What glue are you using for that ? same as faceid glue ?

[@MsSymantec]

👍👍👍👍👍

[@nicolexue0302]

how do you repair xr?

[@durnin6765]

Какой пастой для реболла процессора пользуетесь?

[@andreg953]

Great work my friend !

[@pathankamran9195]

Best videos bro

[@andrewg2430]

Wow excellent work! 👍

[@siran7057]

First ✌🏻

[@ArifKhan-vd1fx]

👍

[@michellenewman20]

How do we know if the camera works after the repairer?

[@Undernods]

Compare diode reading