Restoration a very old 15 gear reducer | Reuse antique gearboxes | Restored rusted transmission box

Restoration a very old 15 gear reducer | Reuse antique gearboxes | Restored rusted transmission box
I got this gearbox. It is very old and rusty. I do not know its history. But I think it was made in 1975. Based on the time stamp on the speed reducer . Restoration a very old gear reducer is a big challenge. There are many mistakes in the project, please let us know in the comments. Wish you a good day . Please support us at: / @therestoration2r878
#restoration
#reuse
#gearbox

[@BostonG]

For the tools you have you did a great job. I'd love to see what you could do if you had a fully functional workshop with a parts washer and sandblaster.

[@timbarry1064]

I was wondering the same thing myself. But I guess you make do with what you have.

[@brownie3454]

this guys good for sure. I'm sure if he had the setup he could do work like on the "my mechanics" channel

[@Romeo_GR]

This man makes what he seems to love,in a location surrounded by plants and birdies....if this isn"t heaven , it is really close to be!

[@garrittpwl]

You're only a few life choices away from making that heaven yours! Go out and do it!

[@MoveAlongPeasant]

I don’t think you understand corrosion completely ....

[@Romeo_GR]

@@MoveAlongPeasant My comment had nothing to do with the actual work,the item ,the corrosion,etc. I only noticed that it is a good thing to do something that you , obviously, enjoy , in a peaceful location! Nothing more bro !

[@r.d.g.7877]

@@Romeo_GR brother i completely agree with you. i challenge anybody else to discribe his surroundings any better. yeah he is where i suppose he wants to b to do( to show us)what he is showing us.👍

[@user-qg1tm4pv6r]

😮😊😢​@@garrittpwl a😅db vvddnvdf TV .. V

[@marcoantero1112]

Um ótimo trabalho, grande profissional, muita habilidade, parabéns.

[@vitaliynikitin4136]

Откопать на свалке, почистить, отшпаклевать и покрасить прямо по ржавчине и снова выкинуть на свалку.

[@user-iw5ql7bg9s]

Он бы здал его в металл больше бы заработал чем вложил

[@Alex-oc6wn]

Я бы для себя перебрал, и не красил, и ходил бы ещё пол жизы этот редуктор, как раз под дровокол хорошый вариант

[@allasivorka7631]

Зато 12000000 просмотров - цель достигнута !

[@user-iw5ql7bg9s]

@@allasivorka7631 ну пусть гордиться до пенсии 😁

[@user-mu3dr2ze6w]

@@Alex-oc6wn Так ведь ни слова о передаточных числах!

[@edswift4124]

I like watching this guy restore stuff, period.

[@farmerbob4554]

The gears, bearings and journals were in terrific condition compared to the case. Really nice restoration.

[@farmerbob4554]

Artist of HengSarath Hello

[@j.c187]

All the gears and everything were in great shape considering . You got pretty lucky . Great build

[@RestoreUrphone168]

wow after you reastor it like new very nice good job

[@bewareofwil]

The ambient noise from the insects and birds along with the hammering almost put me to sleep, very soothing and calming. Amazing job.

[@rcb3921]

16:33 ??

[@magic3061]

@@rcb3921 lol someone having a leg over our taking a shit.

[@farayidarlingtonchaparadza20]

It must be really fulfilling to bring something back to life like this with minimal tooling. Really impressive sir.

[@arizonasquid]

Thank you for this video. As a machinist of over twenty years, I have seen some some items in very bad condition, but none as bas as this was. Your entire video and all you accomplished was amazing. I have subscribed, and will be watching many more of your videos. Good job!

[@charlesrobertson2412]

Very nice job. Restoring things like this is in my blood. Love it !!! Keep that passion. So many don’t have it anymore

[@Chuckcia]

Just my tiny advice. If restoring a shaft diameter for a gear box never weld it. For sure the shaft will break if used. The shaft's torque strength will be reduced to 50% (my best guess) because the shaft is hardened or tempered by the heat and the steel looses its heat treatment. If the wear is just a bit better to turned it in a lathe and refinish it to a smaller diameter and torque strength is not affected much. If restoration is for a museum or collection where the machine will not run, then it is ok to weld it like he did.

[@MAHMO-zw2fl]

احسنت صنعا

[@sankethanchate3649]

Feels so good to see the improvement.... wish I could see how it works

[@richardlopez3857]

Much respect for your patience and attention to detail. I admire the work you do.

[@tfahad2051]

If you watch videos like this a lot, you'd know he didn't do it properly. This will rust back so much faster than usual.

[@thebrantfordrailfan]

@@tfahad2051 Only thing he did wrong was not sandblasting it to clean metal again. Or at the very LEAST, remove as much of the heavy stuff with a wire wheel as possible and follow it with a few good coats of rust converter, If he had done that, i'm sure it would be just fine for a museum, or occasional usage.

[@RafaelSilva-fh2vi]

Isso me relaxa e me da sono! É mto bom!!

[@robertkenned7220]

Sabe oque é isso e para que serve ?

[@phransantos]

Só durmo depois de vê vídeos de restauração kkkk

[@user-fm1lv5um4s]

@@robertkenned7220 согласна с вами полностью,чтооо этооо и дляяя чегооо?

[@edwardhine9224]

With out the convince of not having the several thousands of dollars worth of machine shop tool. I was quite impressed with the work he did to clean up and recondition the gear box using nothing but his bare hands , he did one fantastic job.

[@brownie3454]

pretty sure he used a hammer

[@ketanshelke9261]

It's fascinating to watch and you to get to learn a lot as well!

[@spacekees102]

Ah straight gears you know thats gonna make a nice sound. Well done I used to fix some old stuff myself. I love doing stuff like this.

[@ritarodrigues8978]

Trabalho maravilhoso!!!!

[@user-uj3mj5rv4i]

Х

[@peaceknight5485]

This good mécanicien got the 4 points required to succeed: Knowledge, skills, patience and dedeication (determined) If only one of those 4 points is missing do not try to imitateur him. He is an Artist-Mecanic. I am out of breath. THANKS FOR SUCH EXAMPLE.

[@theophilou86]

Perfect !!!! When you put the seals put some grease to go on more easy

[@robertobezerra8376]

Parabéns excelente trabalho.

[@MariaPaula-uw3ds]

Finally someone who wears gloves!!!

[@bertdavis9320]

I don’t even know what that machine is but I enjoyed watching him bring it back to life.

[@tommyn.j3628]

That same function like a gearbox in a car

[@lenapaulooli]

Gostei, parabéns

[@grumpyg9350]

Filler idea was great.👍👍👍👍👏🏻👏🏻👏🏻👏🏻👏🏻

[@JohnSchoolingJr]

I just love all the precision tools.

[@geraldosilva9815]

Show parabéns 👍🇧🇷

[@paulphersson8060]

Great to see someone with the patience to do this sort of thing. Awesome result, keep it up.

[@jardatridentone1859]

It's seen that You never did something similar. It's clear that device was renovated before. It says freshly cut screw threads, Prepared holes for the bearings. No repairman would thus hit the new bearings directly with a hammer.

[@r.d.g.7877]

@@jardatridentone1859 hey man...the bearings are hardened steel. and besides one don't have to hit 'em hard to seat 'em(place 'em, put them how they suppose to be). one taps evenly all around. or one can use a press(bearing press)(hydrolic bearing press, etc.) feel me.

[@r.d.g.7877]

don't hate. survive

[@jardatridentone1859]

@@r.d.g.7877 Hey, man... I'm a toolmaker and I'm used to work with bearings.. 1) Bearings' cage is not hardened and even minimal deformation caused by sharp blow can damage its function. 2) Yes.. Ring is from hardened steel and it's reason why You can't hit it directly by steel hammer, because You can with 90% security corrupt the fabric structure. 3) The bearings are always deposited by soft strikes over soft metals such as aluminum or soft brass or even wood block 4) How do you select a bearing without carefully measured bore and shaft at the bearing seat?

[@r.d.g.7877]

@@jardatridentone1859 i take dead blow-hammer or piece of wood(hardwood) place it against race or bearing casing and hit it. my luck has always been positive. i'm not closed minded to do things correctly, depends what i'm doing. but hey, if u don't have what u NEED..... U make do... etc. me.... i iz "po" man. i b so broke i can't afford to buy an "o" and "r" to spell "poor". .. so one does what one can to make work without damage. thank you for the insight.

[@vilmapalhares5079]

Perfeito! Ferramentas certas faz toda diferença. 🛠️👏

[@alexnmendes]

só que ele usou bastante as erradas

[@ojuicec5205]

I like how he uses the wrenches instead of sockets 👍🏻 makes it last a bit longer and shows the rust coming out

[@vincesergi9583]

I don't know where this goes but, watching was totally fascinating. I was mesmerized. It takes me back to when mechanics actually fixed things and not like now, where they just replace stuff.

[@teenice894]

True, but it's due to the increase in population and repairs needed. Too much time to rebuild, its quicker to replace.

[@tjeffery100]

I was actually heckling myself that I was 18 years older than what someone considers very old for steel. lol. I enjoy your channel!

[@therestoration2r878]

Thank you for watching the video . Have a nice day

[@albertbitancor1104]

@@therestoration2r878 cacal

[@araoricoelho]

Vejo como o conceito de partes removíveis facilita muito a manutenção e até a restauração de máquinas, mesmo muito antigas e bem estragadas

[@kashiriusus]

После шпатлевания по ржавчине просмотр закончил.

[@Donbassuck]

А дальше запресовка подшипников молотком

[@Nervovo]

@@Donbassuck и наварка вала електродом

[@SeniorOrsoRosso]

@@Nervovo от этого я испытал такую боль что даже не передать словами.

[@SeniorOrsoRosso]

@@user-sy4sf2vn1k Я думаю многие со мною согласятся что тут не такой случай)

[@user-em6jn2kx1q]

@@user-sy4sf2vn1k сомневаюсь, данный пациент ничего не понимает в востановлении, так что цпакля там самая дешевая двухкомпонентная

[@nickolaswilcox425]

the outside looked like a lost cause, but the internal parts still looked great, they really dont build stuff like this anymore, heck it might have even still been usable in its rusted state if it weren't for the damaged connection hub

[@2oceans1]

You can pick one of these up at Harbor Freight $19.99 …. JFWU.. Great Video

[@issamhacker2388]

That guy have fune i like restor cars and engens

[@pengharapsyafaat6837]

Subscribe Im

[@geoffdl03]

Okay... for those of you who do restorations like this frequently, I highly recommend purchasing a needle scaler. It will eliminate many hours of hammering caked on rust.

[@NecroDingus]

Exactly. Needle gun to the rescue!

[@rudy103069]

it almost turned back to stone?

[@tomrobards7753]

That's exactly what I was thinking .?

[@melloroom7510]

geo i think theyre doing it for the camera/audience

[@twasbrillig33]

@@rudy103069 lol

[@rickmessina5396]

Wow! Did think there was any hope for that because of the way it looked to start with. Fantastic job......

[@mufuliramark]

When you look at the tools and equipment used by 'my mechanic' this version is more in tune to what us normal folk have in our garage. It's a fantastic effort.

[@Munjibunga]

LOL ... Yeah, no "I make a new one" here.

[@HyakuJuu01300]

Yeah this time it's "I buy new one".

[@Ea-Nasir_Copper_Co]

@@HyakuJuu01300 "I mess up an old one by painting over rust". Hack job.

[@frankschuler2867]

Great job, pal. Most people would probably have considered that equipment a loss just by looking at it. We shouldn't judge a book by its cover I guess! And, I see a lot of comments here about how this fellow could have used different tools and techniques to get the job done more quickly...which he could have...but I get the feeling he enjoys the process itself and not just getting it done as fast and easy as possible.

[@therestoration2r878]

Thank for your comments . Have a nice day

[@littlebacchus216]

This has to be the rustiest thing I've seen restored. Great job. On a side note, someone get this guy a needle scaler!

[@therestoration2r878]

thank for your comments

[@brendanlink600]

Get him a rattle gun him using the puller buy hand was painful to watch

[@joejarrell2578]

And a decent socket wrench set

[@zedalapa6077]

Muito bom, parabéns.

[@dustijones6964]

Good job on the rebuild! This is usually how industrial equipment looks when it comes from the field....you only send something in when it can no longer be repaired in the field and then the fun truly begins.

[@dietmarbernshausen2531]

Hallo Herr Vece Lollipop

[@Francis_Castiglione]

Y'all need to stop hatin. He did the best job using the resources available to him.

[@ab-nx4lv]

Very radical approach, but a first-class result. I like your "rustpecker".

[@therestoration2r878]

Thank you for watching the video . Have a nice day

[@marioaugustoalvesdesouza3922]

Muito bom, trabalho com jato de areia facilitaria muito o trabalho, enfim ficou exelente, parabéns. Brasil 2021.

[@ednalopes-receitinhascomam2213]

Parabéns ficou show 🇧🇷🇧🇷🇧🇷👏👏👏🤩

[@BibleTumper]

Seemingly impossible to restore until he started pecking at it with hammer. 🤔 I'm getting total satisfaction watching this video. 👍👍👍👍

[@ujmrider]

I would never have started the project, thinking it too far gone. Nice work.

[@rudyschwab7709]

Agreed. It looked like someone used it as a boat anchor for a very long time. I was surprised he was able to resurrect it.

[@odiliojosenascimento3195]

Muito bom!!

[@lnwolf41]

First time I have seen someone who actually did a real overhaul on one of those gear boxes.99% of the time, the insides are almost perfect. they just clean out the old oil/ grease, repack bearing with fresh grease, and oil the gears. Then just repaint, add new seals and bolts.

[@BigManSyr]

i love the metal smacking sound at the beginning

[@user-by1be1dk3x]

Подшипники молотком, сальники через ключ, сварка без маски - это всё херня, делает как хочет, его проблемы. Но почему не показал в открытом виде как работает и зачем нужен этот рычаг ? Это вот непростительно. Понятно что редуктор, но интересно же !

[@jayreiter268]

Ну, похоже, он работает с основными инструментами. Он старается не портить подшипники и уплотнения. Мне приходилось так работать на некоторых работах.

[@user-pi8fv7zm5e]

вот такие редуктора получаем со склада. как за новые спасибо азиатскому другу

[@MrAcexotic]

@@user-pi8fv7zm5e даже корпус не отпескоструил перед покраской. И куча других недочетов. Далеко ему до MyMechanics

[@mikesawyer1336]

That's insane.... I would not have thought it could come back to life.

[@salvajimenezjimenez960]

Como mola estos vídeos gracias!!

[@Youtube-crime]

Круто. Теперь и выкинуть не стыдно))

[@ZZTOP414]

😂😂😂👍

[@Prozharka84]

😂😂😂

[@209tzn2]

что это такое?

[@hollywoodcheremonkey]

The most calming background noise.

[@Itsaboutthewaterlife]

Yeah, I caught that too.

[@walidtash183]

I love these restorers, excellent work

[@mundolivre6792]

Parabéns capacidade de renovação

[@maxj0930]

Is this part of a tractor, or some other farm equipment? Would be nice to see it installed on a machine and being put to work!

[@josmarz3841]

Very old tractor trailer back when you really needed to know how to drive them rigs with 21 speeds, all manual with 2 or 3 gear sticks.

[@vishvajeet3834]

I mean tractors are still manual , we still have atleast two sticks on ours

[@Eric_W]

What impresses me the most is how clean your shirts stay through this whole process!!

[@anrmlumlwundlistr7620]

I noticed halfway through the video the birds all died from all the chemical waste he produced

[@JinNOSify]

plot twist - he switches shirts in every scene. It's just that he has many of the same coloured shirts.

[@melvinarmandocontreras3164]

Its not a 15:1 reducer its a 15:1 gearbox.......

[@user-is3xt9hh6c]

Только русскоязычные комментаторы понимают, что на видео фигня какая то, а не восстановление?

[@lexakesos3204]

Без замеров ещё круче...

[@NurbektheBoss]

А что за хрень это было вообще? 🤔

[@vladyslavshevchenko9813]

Посадка манжет вбила

[@Bream4x4]

Красить без грунта ваще за гранью добра и зла. Мои глаза...

[@youtuber.................]

Конечно это жесть...🤔🕸🐞

[@cesarg.e.5278]

Impecable trabajo .👏👏👏

[@RichieCat4223]

You are really lucky all those bolts came out of the case the way they did.

[@bucksnortbumblefuk6872]

Good job man. When you are older you will be able to fix anything. It will save you a lot of money.

[@Trenscendent]

Seeing you coat the case in filler was so depressing.

[@satsumagt5284]

There's more putty than a rich kid would ever ask during life

[@simonlb6435]

Yep... Take to much time to sand it I imagine

[@gumzagumede8719]

@Homelander ñm

[@sportsbank8428]

More putty than that in most new car front fenders lol

[@LOREGUINNESS]

Why? Please.

[@odairbadia1544]

Parabéns ficou sensacional São Paulo-Brasil

[@davidcook6064]

Shame on all of us in the West who would have said, chuck it and look for something else. I love the fact that these guys have very little equipment, but never shy away from 'impossible' restorations. Brilliant!

[@jonathansmart3763]

Probably because we have to work long hours and no has the time to fix things or afford to have it fixed most times it's cheaper to buy new then repair. Example broke door on my trailer took it to local welder 500 sum dollars yo repair call the manufacturer 400 for a new door. Things are just different here.

[@davidduxbury4919]

Never mind what others say, you are doing a really good job with what tools you have

[@AlanSantos-eo6ee]

2020 pandemia, quarentena e eu assistindo vídeos de restauração kkkkk

[@mariaaparecidadasgracas1681]

Melhor é se ocupar com alguma coisa que se aproveite tiro animo de ver as restaurações.

[@larianealfredo6154]

muito bom parabens

[@welldressedblackbaby5551]

This guy loves every comment for that hes earned a sub

[@rayutech5833]

Sub me

[@victoryfirst2878]

I really like your confidence taking on a challenge such as this gearbox encrusted with rust. Good luck with the next one fella.

[@timjohnson1199]

This probably isn't his first time.

[@victoryfirst2878]

@@timjohnson1199 That is some great news for us all. Would you not say Tim ?? Good day and peace. VF

[@andritok6677]

🔥

[@andritok6677]

🙏

[@victoryfirst2878]

@@timjohnson1199 You are correct Tim.

[@bobhenry6159]

Absolutely amazing work bringing this box back from the dead. Well done.

[@jethrobodine9867]

Pretty impressive. With the correct gaskets and torquing the moving parts to even specs it would be close enough to perfect even for my OCD.

[@helendurow8211]

Your dedication and patience is to be greatly admired !😘

[@wallyallyn5473]

I'm amazed at how good a condition those bearings were in yeah I don't know what a reducer looks interesting

[@moonsong14i45]

앙드레류 네덜란드공연

[@josmarz3841]

You don't know what a reducer is and this sumbitch here replies to you in who the fuck knows what that language is. Lol

[@josmarz3841]

That's like a secondary gear box to help reduce speed you'd have the two sticks in a truck equipped with this and sometimes 3 sticks depending the rig, but technology replaced all that.

[@ernestofernandez592]

I admire people that restore things.

[@user-rb8yv7hk4x]

well done ...really amzing ,a big difference between before and after restoration !!!

[@mescalchapsmusicchannel3943]

Damn that thing had some serious rust

[@AndyFletcherX31]

I'm really impressed at the final result, at the start it looked like something which had been used as a boat anchor!

[@therestoration2r878]

We put a lot of effort into the work. It is a gearbox for small boats. Thank for your comments

[@user-ej3yj4pp6y]

جهود جبارة قمة الروعة والإبداع

[@user-hd6wk1yi8q]

my eyes hurt when you see how a big steel hammer and crooked hands knock on the bearings

[@LOREGUINNESS]

👍. What is your suggestion istead of that? Thank you.

[@FRED-dq8jf]

@@LOREGUINNESS heat the housing

[@FRED-dq8jf]

He knows nothing about how to install the bearing and flange.

[@LOREGUINNESS]

@@FRED-dq8jf thanks for responding.

[@FRED-dq8jf]

@@LOREGUINNESS if want to install the bearing onto a shaft, and it’s tight fit, bearing should be heated or cold the shaft. Don’t use the hammer, it will damage the bearing or shaft.

[@maksqwe1]

All things considered, this gearbox looks to be quite well maintained. Yes it’s been sitting somewhere for a long time but considering most threads were ok and the thing was lubricated inside was pretty impressive considering the age and external rust. I would love to have a business restoring things, because as you can see from this video it must be pretty much non existent to be beyond repair, I mean look how this turned out!

[@sadiehunt3970]

When the gear box was opened I was shocked on how good it looked inside

[@juaneags]

Service with a lot of patience, dedication and even a little knowledge. Congratulations on the video, Ednaldo do Brasil

[@sscastalt]

You are great!! Awesome!!

[@theloniousratledge8835]

Bellissimo, veramente un restauro formidabile!

[@luizrodrigues5463]

Foi muito bom ver um trabalho como esse, mas gostaria de que postace ele funcionando. Cyt. Limeira São Paulo Brasil

[@mauriciogalli9129]

Boa. Eu só acho que não deveria ter passado a massa, creio que ficaria mais baca rústico mesmo

[@hudsonholsbach]

Não tenho a mínima idéia do que é isso rsrs

[@Jooorg100]

Concordo! Deveria mostrar funcionando

[@danielcristovao4655]

Trabalho muito bom, só acho na minha opinião que antes de passar a massa plástica ele deveria ter feito um jateamento da caixa para retirar todo o ferrugem

[@DwightMS1]

That thing was fossilized. Amazing restoration!

[@user-xd4sx1xq7c]

Es wundert mich jedesmal wenn ich deine technik sehe.

[@franciscoj6771]

Muito bacana esses vídeos obrigado

[@snowkittten]

I don’t even know what this is or what is was used for but seeing it get cleaned and reassembled is hot

[@darrellpotter6710]

industrial double reduction....can be used in various applications....that one is also shiftable

[@snowkittten]

Darrell Potter Im gonna pretend I understood that lol. Thanks!

[@user-qg2kx2vt7q]

Закрытые подшипники - то, что надо! Для них масло в редукторе как раз пригодится..

[@aasaas9221]

Может для того и закрытые чтобы масло не поподало не думал об этом?

[@user-ql7tz3mt5l]

Масло для шерсти

[@aasaas9221]

@Nikita Fedorenko либо обычная смазка типа литол либо он не закрытый полотно

[@CBOu-ZOVyt]

@@vf4896 в КПП подшипники набиты смазкой? Это какая кпп

[@CBOu-ZOVyt]

@@vf4896 это шнивовские подшипники стали ставить на классике все открытые были.у меня ваз 2107 2011 года все открытые,перебирал недавно

[@merrillmilner8717]

Excellent work - I would've like to see it in action.

[@robertobezerra8376]

Fantástico 👏👏👏👏👌👌🇧🇷

[@RAYtheram]

Soooo many negative comments, have any of you oxygen wasters ever tried doing what he is doing. I overhaul auto's and manual gearboxes and diffs for my career and I know how damn frustrating it is finding parts or getting the mongrels apart good on him for doing this even if it isn't to keyboard warrior specs. Keep up the good work

[@Fadamor]

"...doing what he is doing"? You mean taking a piece of heavily rusted equipment that has obviously been submerged for some time, replacing items with substitutions he decides are okay without any regard to what the design limits of the device were originally set at, then re-selling it as "refurbished"? Yeah, I've never done that. I never will either. But that doesn't mean I can't spot fraud when I see it. IMHO, the "oxygen wasters" are the ones defending this practice.

[@RAYtheram]

@@Fadamor Yeah I see the point your trying to make mate but it's obvious that you are getting the word refurbished mixed up with restoration. He has a hobby and he is sharing it, is your hobby sitting at your computer picking on people? I bet your one of those facebook wankers that report people's posts?!

[@lastotallyawesomebleach204]

Fadamor you sound like the kind of douche bag who would order a well done steak then complain about it being overdone.

[@mrsantana9094]

@@RAYtheram dude you just made my day, lmao! I bet he is!

[@lovebaja]

Calm down. People are giving suggestions and you're losing your shit over it for some reason. Do the responsible thing and delete your dumbass comment.

[@bucksnortbumblefuk6872]

If you have a stuck broken pully like that ever again, just take a cut off wheel and make a cut almost all the way through. Then a good wack with a chisel and it will split. This works well on brake rotors also. Also, cast iron doesn't cut like steel w a torch.

[@Luzt.]

The most difficult part is to perform carefully designed ageeing in order to have a constant supply of items to restore. Good job.

[@ItaliansAreFromItaly]

Gotta love the ol’ can’t be tight if it’s a liquid method