Restoration Burned Vacuum Cleaner Motor | very rusty | Test with smoke

_In this video I show you how I restored this Burned Vacuum Cleaner Motor
_I hope You like my video.
____________________________
_Why are the motor winding wires cut?
◻In fact, I bought this vacuum cleaner motor from a scrap yard in our city for 8 dollars, and the scrap workers cut the wires of this motor to see if the wires of this motor are copper or aluminum.
◻But we will rebuild it like the first one or even better, all the parts will be rebuilt, its winding will be wound again like before, the number of turns of its wires is 130 turns and its grade is 0.60.
◻Armature by the Growler machine, which we rebuilt here
• Armature Testing Growl...
It is tested that it is completely healthy. The armature bearings that were making noise will be replaced with new ones.
◻The rusted sections were removed by sandblasting and painted
◻Screws and washers have their rust removed by acid and the brush is pulled
Special thanks to all those who helped us in making this video and also to you who watched this video❤😁
Please forgive me if I have any mistakes in English, my native language is not English
____________________________________________________________________________________
❥Armature Testing Growler - [Restoration] - Restoration for use
• Armature Testing Growl...
❥FULL RESTORATION video. Repair 1HP Burned Electric Water Pump
• FULL RESTORATION video...
❥Table Fan (Lord Electronic Corp) - [Restoration] _ Amazing Restoration for use
• Table Fan (Lord Electr...
_____________________________________________________________________________________
Subs:3.5K
Hashtags:
#restoration #repair #burned

[@andrzejporeda7281]

Przepiękne jest ten cały ślniczek z odkurzacza odrestaurowany pozdrawiam mile i serdecznie 👍👍👍👍👍

[@georgebrown8312]

Fantastic job you did restoring that vacuum cleaner motor. It looks much better and it works like a charm too. Excellent work as usual.

[@Restorationforuse]

Thank you very much!😊❤

[@RestorationVideo]

Congratulations Very nice!.Top job. Very good recovery. It does a great job in very talented hands! I really enjoyed this video, as I usually do. Thank you🤘🤘 👋 👍🎉 👏 😊 😊 😊............

[@pt477]

1) Komutatora nie szlifujemy papierem, tylko należy PRZETACZAĆ i najlepiej w nowych łożyskach 2) Wirnik trzeba sprawdzać czy nie ma przerwy w uzwojeniu, lub na połączeniu z komutatorem 3) Do sprawdzania na zwarcie w uzwojeniu wirnika, znacznie lepiej użyć stalowej blaszki ze szczelinomierza + - 0,15 mm. 4) Ogólnie OK 🙂

[@Bloxy.Builds]

Great job! Recommendation, when there is lots of dust being dropped from something, have a vacuum on hand, it is far more easier than sweeping.

[@Restorationforuse]

Thank you Bloxy for watching video❤ Thank you for this good advice, I will definitely do it in the next videos😃

[@rinkumourya8636]

​@@Restorationforuse😮

[@MASI_forging]

Great work as always. What a beautiful restoration 👍👍

[@Restorationforuse]

Thanke you MASi ❤😊

[@williamwiels]

Super travail !

[@Restorationforuse]

Thanks❤

[@sinisaradosevic6794]

Great job 😊👏👏

[@Restorationforuse]

Thank you! ❤

[@Mss-sj1fb]

ایرانی هستی! اصلا سبک کار نشون میده ابزار و لوکیشن و دستکش استاد و رنگ ام دی اف و.... اما دمت گرم کارت خوبه و این موتور هم ساختگی زنگ زده اش کردی من خیلی آی کیو ام بالاس 😅❤😂

[@PhongThanh-sd8hl]

🔨🔨🔧🔧🆙😮😮👍👍👍👌👌👌

[@Restorationforuse]

Thanks😁❤

[@LateefAlkaragole]

هذا الفديو كاذب وهذا الموتور ليس قديم وانما جديد وهذا ليس صدأ حقيقي وانما تم طلاء الماطور بصبغ بلون الصدأ مع اضافة بعض الحبيبات له ليبدو حقيقيا والدليل انه لايوجد صدأ في الاماكن المغطاة مثل البراغي وماتحتها بل يوجد لون الصدأ حتى على الاجزاء الغير قابلة للصدأ كالفخار هههه بينما المفروض انها لاتصدا والبراغي التي يجب ان تصدأ ليست صدئة قد تنطلي اللعبة على ابناء الغرب لكنها لاتنطلي على العربي وخاصة العراقي ابن الرافدين هههه