Restoration Curved Dagger of ARTILLERYMAN - MODEL of 1907

  Рет қаралды 58,883

Screws And Tools

Screws And Tools

16 күн бұрын

Hi! Today, the restoration of the curved dagger of the Bebut artillerymans. Sample of 1907. This dagger was produced in 1915, at the Zlatoust arms factory. The condition of the dagger is bad. There are no accessories for the handle and scabbard. Also, the length of the blade is missing about ~ 5-8 cm. Well, let's start the restore.
The first step is the disassembly of the dagger. Next, clean the blade from rust with a tool. After inspection of the surface of the blade, I found that it was badly corroded. It was decided to lightly sand the blade with sandpaper.
The stamps on the blade have been preserved and they are readable.
The wood scabbard of Bebut dagger turned out to be shortened, like the blade itself. They were covered with modern leather and modern glue. I completely cleaned the scabbard, sanded it further, primed it, sanded it, and so I came step by step closer to the fact that they became strong.
I made new fittings and pins for the dagger handle. In the same way, I made new fittings for the scabbard out of brass. As usual, I made a test for you. Please don't forget to share this video.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #dagger #restoration

Пікірлер: 286
@Sova_Poliyrnaiy...
@Sova_Poliyrnaiy... 5 күн бұрын
Часто смотрю видеоролики этого мастера! Браво! 🫡🫡🫡 Снимаю шляпу! ! ! ! ! ! Великолепен! ! ! ! ! ! !
@ScrewsAndTools
@ScrewsAndTools 4 күн бұрын
Спасибо, но я всего лишь учусь, далеко до мастера)
@oleg_konovalov
@oleg_konovalov 14 күн бұрын
Доброго времени суток, Алекс! Бебут попался в относительно хорошем состоянии, даже ножны и рукоять новые не пришлось делать. Особенно понравилась форма стаканчика ножен! Спасибо за очередное отличное видео! 👍
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Спасибо!!
@oleg_konovalov
@oleg_konovalov 11 күн бұрын
@@ScrewsAndTools 🤝
@soll9207
@soll9207 14 күн бұрын
Оригинальная получилась рукоять, со следами окислов меди!!👍👍👍
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Я сперва переживал, а шлифовать грубой наждачкой не хотел - а следы отобразились под конец очень натруально.
@alekseikovalenko3678
@alekseikovalenko3678 14 күн бұрын
Бебут обрёл вторую жизнь, это классика и куча лайков. БИБИП в конце это здорово.
@ih8music
@ih8music 14 күн бұрын
I thought the handle was ruined by the wire but it resulted in an interesting effect when removed and sanded smooth. This one really came together nicely!
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Yes, it was so unexpected and pleasant to get a natural beautiful effect
@user-sz3ps3ow7f
@user-sz3ps3ow7f 14 күн бұрын
Алекс, работа как всегда, на высоте!!! Бебут получил вторую жизнь!!!
@TheTrueBobDole
@TheTrueBobDole 14 күн бұрын
I think the true star of this video is the scabbard. You went above and beyond to save it, instead of making a new one. And I always enjoy watching your brass work 😄. 👏Bravo👏. ✨️🗡✨️👍 P.S. I just added an antique U.S. Model 1840 NCO sword to my collection. It's in fair condition, and the blade sings 🎶 when struck. I love it 😊. P.S.S. I ordered my own tiny anvil!
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
I am happy for you, congratulations on your new acquisitions! By the way, you can always share photos in the Instagram direct, I'm interested. Thanks for your attention
@user-zr2eb4rn8j
@user-zr2eb4rn8j 14 күн бұрын
Nice that were able to save the scales and some of the sheath. Great work and your additions were perfect. I am disappointed there was no cutting of meat and vegetables, I was looking forward to lunch.
@chrisbailey5955
@chrisbailey5955 14 күн бұрын
😢😢
@user-we6tr8tg4o
@user-we6tr8tg4o 13 күн бұрын
Алекс, спасибо за удовольствие наблюдать вашу работу! Ждем продолжения!
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Благодарю!
@user-jf7qp6eh3m
@user-jf7qp6eh3m 14 күн бұрын
Симпатичный экземпляр получился. Лайк.
@user-ky6tu3dd4x
@user-ky6tu3dd4x 14 күн бұрын
Привет Алекс. Мне нравится как ты решаешь вопросы с реставрацией 😊
@user-oq5yk7tt2r
@user-oq5yk7tt2r 14 күн бұрын
Клёвый бебут 🤙
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
У меня их уже два с половиной)
@trimaris1
@trimaris1 14 күн бұрын
I love your work. This turned out especially nice. I like how you save what you can of the original.
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Thanks for feedback!
@markfergerson2145
@markfergerson2145 14 күн бұрын
That seems to be his trademark so to speak, keeping as much as possible of an original while fabricating only what is necessary. His fabricated parts, Ike the brass on the scabbard and the caps on the scales screws, are always in keeping with tradition. I must also say that his brass fabrication skills have improved greatly since I began watching his videos.
@user-gd8zd3ye1f
@user-gd8zd3ye1f 14 күн бұрын
Шикарный каманный бебут!
@user-kc4it7sz1i
@user-kc4it7sz1i 13 күн бұрын
Мастер прямо таки вышел на новый уровень, поздравляю. И "котэ" на занавеске с нами. 👍
@level98bearhuntingarmor
@level98bearhuntingarmor 14 күн бұрын
Can't believe I've never said thus before but I love the "the rest is history" jar
@Immortalaquarius
@Immortalaquarius 13 күн бұрын
Mr. Alex, sir, you did a wonderful job in restoring this blade. I really appreciate the fact you did not speak badly of the person who tried to repair it themselves, whomever they may be. In truth, I thought the scabbard and scales would be very difficult to restore yet they came out beautifully. Perhaps one day you coud do a step by step tutorial on how to make a snug fitting scabbard for a blade? Especially since you do not use anything that is beyond the means of a general hobby person or someone who wishes to be self reliant. Take care, enjoy delicious tea, cook up a good meal, take time out with family, and bibip.
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Hi! Thank you more for your attention and interest. As for the scabbard, at this stage I don't plan to shoot very detailed videos because I don't have free time. At this stage, there is such a lesson on how to make a scabbard.Sure, If you are very interested and need this - (www.patreon.com/Screwsandtools/shop/how-to-make-scabbard-for-caucasian-type-40108?Link&)
@user-ic2qd6ip2u
@user-ic2qd6ip2u 13 күн бұрын
Отличное видео и отличный результат!) Как всегда, интересно! Спасибо!
@johnday8771
@johnday8771 14 күн бұрын
Beautiful work. And the tea slurp was great too.
@andrewhaddock7996
@andrewhaddock7996 14 күн бұрын
Most impressive ..like the ageing effect on the brass work.
@sleazy1drache
@sleazy1drache 14 күн бұрын
Another beautiful restoration! Thanks for sharing it with us
@andygibbs8893
@andygibbs8893 14 күн бұрын
Amazing work bringing that handle back
@Alexey_Lutsenko
@Alexey_Lutsenko 10 күн бұрын
Как всегда бережное и аккуратное отношение к истории.И отличная работа!!!
@ScrewsAndTools
@ScrewsAndTools 10 күн бұрын
Благодарю!
@funnymoments6988
@funnymoments6988 12 күн бұрын
Awesome restoration, my friend! Don't stop. I love you channel ❤
@annettemalaski1967
@annettemalaski1967 13 күн бұрын
I am very glad the scabbard was able to be striped and saved. I am also glad they wired the handle instead of ruining the chances of someone knowledgeable being able to fix and restore it. Job well done! BEEP BEEP!
@RoninDosho
@RoninDosho 14 күн бұрын
One of your best pieces of work. Always enjoyable to watch you create and restore.
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Thnka you!
@Bublikolya
@Bublikolya 8 күн бұрын
Хорошая работа вышла
@marilyngianadda1661
@marilyngianadda1661 5 күн бұрын
Another Masterpiece Bravo! ❤
@user-ej1zo5gh4j
@user-ej1zo5gh4j 14 күн бұрын
Отличная работа!
@antikaplanet2970
@antikaplanet2970 13 күн бұрын
Very very beautiful restoration ❤
@user-mc8eq7fm2z
@user-mc8eq7fm2z 14 күн бұрын
GREAT JOB MY MAN ! YOU ARE THE MAN !
@yegorvolhv
@yegorvolhv 14 күн бұрын
Браво мастеру! 👏👍🔥
@immtur
@immtur 14 күн бұрын
Вот зацепило как ножны восстанавливал - это 5... Рукоять тоже ... Как всегда спасибо за видео;
@MASI_forging
@MASI_forging 13 күн бұрын
Such a great restoration as always 👍👍
@alex.ryazan8376
@alex.ryazan8376 13 күн бұрын
Отлично получилось👍👍👍👍👍👍👍👍
@brianchester4218
@brianchester4218 13 күн бұрын
Nice job as always Alex you never cease to amaze us all
@user-uj3st2cr5h
@user-uj3st2cr5h 13 күн бұрын
Серпянка хороший ход. Тоже ее часто применяю для армирования поверхностей.
@ziegenwilly
@ziegenwilly 12 күн бұрын
Инструменты вашей мастерской становятся все лучше и лучше, отлично!
@user-fq2gx3be2o
@user-fq2gx3be2o 14 күн бұрын
Спасибо, Алекс!!!!
@stefanandersson2394
@stefanandersson2394 9 күн бұрын
It is amazing to see you work with those very interesting blades. Thank you for sharing!
@ScrewsAndTools
@ScrewsAndTools 9 күн бұрын
Thank you!
@windsorcastl
@windsorcastl 13 күн бұрын
I like the tiger stripe the wire left. Very cool restore!
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Thanks!
@user-ju9td8ue4b
@user-ju9td8ue4b 14 күн бұрын
Алекс привет. Ну, что тут скажешь 😏 всё просто замечательно получилось 👍 И следы от проволоки на рукояти даже смотрятся отлично😁 хорошо, что не убрал. 👍👍👍🤝🤝
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Да такой приятный след остался я даже не ожидал))
@user-dz8dg6ey8g
@user-dz8dg6ey8g 13 күн бұрын
Алекс реставрация на качественном уровне. Но ножны это другая история, здорово и красиво получаются. Спасибо за видос, лайкаю.
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Спасибо за отзыв
@jeffreyandreas7514
@jeffreyandreas7514 14 күн бұрын
Beautiful job Alex, it looks great! Always enjoy your videos!
@thepagan5432
@thepagan5432 13 күн бұрын
Definitely one of the better ones you have produced, well done 👍
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Thank you!
@ASAI_PODMOG
@ASAI_PODMOG Күн бұрын
Шикарная работа!
@Cetrifuga1945
@Cetrifuga1945 13 күн бұрын
Bene spacca e taglia tutto sei un 👌Gueriero
@Wayward5686
@Wayward5686 14 күн бұрын
What a transformation great job.
@BlackthornBushcraft
@BlackthornBushcraft 14 күн бұрын
Beautiful work
@jacknix6133
@jacknix6133 14 күн бұрын
Tremendous work as usual! Your videos are so much fun to watch too! 😊
@xanmamaev8710
@xanmamaev8710 14 күн бұрын
Шикарные циковки,береги их, современные стоят безумно
@user-ut4yo7el4c
@user-ut4yo7el4c 14 күн бұрын
Посмотрел с удовольствием. Мастеру респект!
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Спасибо, но я учусь только
@user-ut4yo7el4c
@user-ut4yo7el4c 14 күн бұрын
@@ScrewsAndTools Дорогу осилит идущий...
@razorboyXVII
@razorboyXVII 14 күн бұрын
Awesome restoration, Alex! Beep! Beep!
@estebantomsic9955
@estebantomsic9955 13 күн бұрын
The jar should say "The rust is history"
@user-mu9lz7bs3d
@user-mu9lz7bs3d 14 күн бұрын
КЛАСС👍👍👍 на этот раз бибип услышал)))
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Ура)
@tomswindler64
@tomswindler64 14 күн бұрын
Very nice,you killed it.great looking piece.just keep on doing what you do best and carry on.great video 😎😎😎👍👍👍
@TheUnclefester13
@TheUnclefester13 14 күн бұрын
Beautiful craftsmanship. Hope to own a blade like that one day.
@ScrewsAndTools
@ScrewsAndTools 12 күн бұрын
^_^
@djambulattuayev8360
@djambulattuayev8360 14 күн бұрын
Всё Люкс! Добавьте "шарик" на нижний "стакан"! 👍👍👏✋💂‍♂️
@user-nh7ci6ip1u
@user-nh7ci6ip1u 11 күн бұрын
Молодец. Смотрится очень аутентично. Видно набитую руку.
@naemnikn
@naemnikn 14 күн бұрын
Очень интересное решение с заклепками.
@user-ke3de9md6n
@user-ke3de9md6n 14 күн бұрын
ооооо!!!! бииибип!!!! гуд гуд!!!🤣🤣🤣
@MrGeroth
@MrGeroth 13 күн бұрын
Very nice and excellent work.
@andyc750
@andyc750 12 күн бұрын
excellent work, and you have some new tools again, good to see
@ScrewsAndTools
@ScrewsAndTools 12 күн бұрын
Thanks!!
@robertryden8036
@robertryden8036 13 күн бұрын
Your skills keep improving. A beautiful job well done. BEEP BEEP!
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Thanks!!
@pauldockins9635
@pauldockins9635 12 күн бұрын
So amazing, an object of beauty, and functional.
@ScrewsAndTools
@ScrewsAndTools 12 күн бұрын
Thanks!
@suuris1
@suuris1 13 күн бұрын
Wow, well done!!!
@brianalexander6280
@brianalexander6280 14 күн бұрын
Hello Alex, beautiful restoration! Great job on saving most of the original pieces! Love the brass on the scabbard! All the very best to You and Yours from Brian in Southern California
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Greetings! And thank you for feedback)
@pickletreewoodcraft7858
@pickletreewoodcraft7858 14 күн бұрын
Incredible as always! I can’t tell you how much I appreciate the way you balance preservation and restoration with these pieces because it’s sickening to watch people put a mirror shine on an old knife that never had one
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Thank you for your understanding and feedback, yes I agree with you
@anonimgeo1299
@anonimgeo1299 14 күн бұрын
Я рад новому видео, скачаю потом посмотрю, уверен что понравится..
@ziegenwilly
@ziegenwilly 12 күн бұрын
отличная работа, очень красиво
@samuelsiedschlag4486
@samuelsiedschlag4486 14 күн бұрын
Another wonderfully done restoration. Dankeschoen.
@carlmcdaniels1675
@carlmcdaniels1675 13 күн бұрын
Well Done Sir!
@user-zq8eb2ky3p
@user-zq8eb2ky3p 14 күн бұрын
Бебут всегда было классным оружием интересно какого он времени? Вам благодарность за ролик и субтитры.
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Образец 1907 года, данный выпуск 1915 года. Спасибо за внимание
@jasoncampbell6222
@jasoncampbell6222 14 күн бұрын
Amazing work Alex, I'm so envious of how easy you make things look but I know how difficult your work really is. Best wishes from here in the UK.
@ScrewsAndTools
@ScrewsAndTools 10 күн бұрын
Thank you!!
@user-if4rh9xm9p
@user-if4rh9xm9p 14 күн бұрын
Never disappointed in your restorations,your confidence in your work is obvious always a pleasure to watch
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Thanks ^_^
@user-fl6gc3jm2p
@user-fl6gc3jm2p 14 күн бұрын
Как всегда залипательно! Без всяких супер пупер инструментов ! Мастер! Тысяча лайков! 👍🔥👏
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Спасибо!)
@gerryhuntman
@gerryhuntman 13 күн бұрын
Great work, Alex 😊
@ScrewsAndTools
@ScrewsAndTools 13 күн бұрын
Thanks!
@bobbymeadows9373
@bobbymeadows9373 14 күн бұрын
A very nice job
@pickletreewoodcraft7858
@pickletreewoodcraft7858 14 күн бұрын
I thought I might mention a technique you might try with brass, create a paper template the exact size and shape you want and using a chisel to cut the outline, this saves potential damage from snips and saves time filing into shape. It’s a technique I discovered from an Indian craftsman and i have adopted it myself and really like it.
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Hi! Thanks for your interest and advice, I'll try!)
@tomduemling4502
@tomduemling4502 13 күн бұрын
Amazing restoration ! ⚔
@ScrewsAndTools
@ScrewsAndTools 11 күн бұрын
Thank you!
@davidmadguy6003
@davidmadguy6003 14 күн бұрын
very good, congratulations
@ariadneferreira2252
@ariadneferreira2252 14 күн бұрын
Gorgeous job, as always!!! Full beep beep!!! 🥰😂🥔🥔🥔
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
^_^ )))) thanks
@JonathanBerrube
@JonathanBerrube 14 күн бұрын
Bonjour vous êtes super tu continues comme ça c est super tu est un mec super
@elainedeoliveirasouza-bf3sl
@elainedeoliveirasouza-bf3sl 3 күн бұрын
Show de restauração ❤
@luis9484
@luis9484 14 күн бұрын
Impressive! Looks very strong.
@williamlee8098
@williamlee8098 14 күн бұрын
Another great job
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Thanks!
@zbigniewkowalski8866
@zbigniewkowalski8866 14 күн бұрын
Oto.....mistrz....👍💪👏😀 Pozdrawiam Cię cieplutko....🕊️🥂🇵🇱
@user-ef4lt8hg5l
@user-ef4lt8hg5l 14 күн бұрын
Однозначно лайк!!! 👍👍👍
@helgryurikovich9546
@helgryurikovich9546 14 күн бұрын
Залипаю на работу мастера. Браво!
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Я не мастер, я только учусь, но спасибо)
@rolandovega7397
@rolandovega7397 14 күн бұрын
Workmanship
@user-je1vi5gs6z
@user-je1vi5gs6z 13 күн бұрын
Круто, Алекс!!!
@serendipityforge333
@serendipityforge333 14 күн бұрын
Very nice.
@JesusEduardoMezaTapia-yg2hv
@JesusEduardoMezaTapia-yg2hv 14 күн бұрын
Buen trabajo hermano, salu2y bendiciones de México🇲🇽🔪🗡🏹🤗
@thierrypasquet1503
@thierrypasquet1503 13 күн бұрын
Magnifique.
@user-rq3zk2uf1n
@user-rq3zk2uf1n 14 күн бұрын
Дуже круто,як завжди
@ScrewsAndTools
@ScrewsAndTools 14 күн бұрын
Вітаю! Дякую за відгук і увагу.
@user-jo1pl8bi4u
@user-jo1pl8bi4u 13 күн бұрын
Красота👍
@joeldamasceno3800
@joeldamasceno3800 14 күн бұрын
Sensacional
@rickroll6029
@rickroll6029 14 күн бұрын
ულამაზესი მამუშევარია
@giboron
@giboron 14 күн бұрын
nice
@VodkaBalalaika1
@VodkaBalalaika1 14 күн бұрын
Хорошо Друг😁
Restoration Pocket DOUBLE BARREL Gun
14:14
Screws And Tools
Рет қаралды 36 М.
Restoration AFRICAN Sword NIMCHA
26:39
Screws And Tools
Рет қаралды 153 М.
Joven bailarín noquea a ladrón de un golpe #nmas #shorts
00:17
CAN YOU HELP ME? (ROAD TO 100 MLN!) #shorts
00:26
PANDA BOI
Рет қаралды 35 МЛН
О, сосисочки! (Или корейская уличная еда?)
00:32
Кушать Хочу
Рет қаралды 7 МЛН
Restoration of highlander DAGGER - The SHARPNESS of past
20:08
Screws And Tools
Рет қаралды 335 М.
Restoration of Georgian SABER - THUNDER of Mountains
35:50
Screws And Tools
Рет қаралды 314 М.
Why Did They Stop Making These? [Restoration]
21:20
Hand Tool Rescue
Рет қаралды 1,5 МЛН
Restoration Dagger of MACHINE GUN Teams - MODEL of 1908
14:10
Screws And Tools
Рет қаралды 763 М.
EXTREMELY Rare Gun Lighter Restoration, World War II - D-day 1944!
13:59
Awesome Restorations
Рет қаралды 287 М.
Datsun 240Z Restoration - Blasting & Primer (Part 4)
14:03
my mechanics
Рет қаралды 588 М.
Restoration Old Rusty SAW - Parts are RUSTED FOREVER!
11:43
Screws And Tools
Рет қаралды 31 М.
Don’t smoke !! 🙏🙏
0:33
Tibo InShape
Рет қаралды 14 МЛН
Сломала любимые спицы | #джулай
0:33
DJULAYY
Рет қаралды 2,6 МЛН
Лепим из Candy Clay - самой крутой легкой полимерной глины 🤘🏻 #diy #clay #творчество
0:14
Candy Clay. Уроки по лепке из легкой глины!
Рет қаралды 2,1 МЛН
🇮🇩Let’s go! Bali in Indonesia! 5GX Bali
0:44
ISSEI / いっせい
Рет қаралды 14 МЛН
👮‍♂️Полицейский Застал Жену🤦🏻‍♂️
0:52