Restoration of a New Haven Banjo Clock part 2 the case

[@bradb4075]

Thank you! I love that you show how to tackle a restore like this step by step! It looks wonderful. Can't wait to watch the rest of the series.

[@DanieloClock]

I love Banjo style clocks, great restoration job! I congratulate you, your channel is very interesting, very professional!

[@dperry428]

Thank you very much!

[@rehorneman]

Great job. Can't wait for your next clock repair video

[@dperry428]

Coming soon!

[@adrianzamfir330]

Hello, Mr. Perry! Great job! I have the same bezel as in your video with a flat glass. What have you used for polishing the copper bezel? Thank you!

[@dperry428]

Brasso, followed by an acrylic bath cleaner/polisher.

[@quynguyen9046]

bạn có cách nào đưa vòng vào thay thế ống lót không ?

[@dperry428]

Open the hole with a step-drill, cut a ring on the lathe and silver solder it in the hole.

[@williamreich7134]

Hi again Don! I am so happy to see that you are doing well and in good health! How can I get in touch with you? Always happy to learn from you!!😊

[@dperry428]

You can leave an email in a comment, but you'll have to put the symbols in words, such as "at" and "dot" or KZbin will delete the comment. Even then, it doesn't work, but it's worth a try. I hold comments for approval and can then delete the comment without publishing it.

[@colbysclocks]

Hello, Mr. Perry! I've got a clock in the shop that needs a bit of case work, mostly on the metal accents. It's an Ingraham but looks like a Seth Thomas Adamantine mantel clock. I can't tell if the bezel and dial pan are brass or not. The rest of the accents, the pillar bases, feet, etc., don't seem to be. They appear to be a non ferrous silver colored metal painted gold. My only issue is the dial pan and bezel are different colors; the bezel and the rest are all a much darker gold color, while the dial pan is much lighter and looks more like brass. Could the dial pan be brass while the rest are just painted gold? The gold looks fine but the dial pan is stained and needs some work. I'm just not sure whether or not they all ultimately need to be the same color. I just wish I could see the clock when it was new!

[@dperry428]

The accent pieces are pot metal, cast low-melting temperature mixture of metals. They are then plated, which often flakes off, leaving the bare, gray-colored metal exposed. Sometimes, they just get painted with gold-colored paint, which I think looks tacky. I like to use Rub-N-Buff, which is a semi-liquid Carnuba wax containing finely ground metal. A little on a finger touched to the highest surfaces, gives a nice look without being gaudy. There is a lot of variation in the bezel, dial ring and dial pan. Do a search for images of "Ingraham black mantel clock" and see if you can find your clock. The actual bezel is almost always brass, the dial pan may be brass, but more likely zinc or tin and the ring around the dial is almost always silver-colored (another candidate for Rub-N-Buff).

[@colbysclocks]

@@dperry428 Thanks a plenty! I'll see what I can do. I appreciate the fast response!

[@dperry428]

You're welcome.

[@ronaldsassi9480]

Hello, Please Explain the Baking soda/super glue useage...

[@dperry428]

Baking soda accelerates the polymerization of the cyanoacrylate glue and also add solidity to the otherwise runny liquid glue. The result is instantaneous hardening into a plastic material that can be drilled, sanded and painted. kzbin.info/www/bejne/m4GWqX1_f5KHmLc

[@bradb4075]

Does that hand cleaner have pumice in it? I have heard mention of using Go-Jo hand cleaner, which I believe has orange oil, and a small amount of pumice. And that to me sounds too aggressive, but I havent tried it. Whatever you used certainly looks good afterward!

[@dperry428]

Pumice comes in many grades. Fine grades are used to polish. I don't know if it contains pumice. Most have orange oil to dissolve grease. I learned about using waterless hand cleaner from a professional restoration shop. Here's another example: kzbin.info/www/bejne/jKqzn39ogtd0Z6csi=HXuDJDo90itYAVnm If you''re unsure about contents, test on a hidden area before using.

[@bradb4075]

@@dperry428 Thanks! The Gojo I am used to comes in an orange pump container, so I will assume what you and the video you linked are using is something different and non-abrasive. I'll have to check it out at an auto parts store.

[@dperry428]

Auto parts store is where I got mine. It contains lanolin, which really helps clean and polish.

[@loganradd150]

Quick question I came into an f kroeber that appears to be about 150 yrs old . Can you help me identify it and date it? I was able to restore function without a complete disassembly at this time. Any information I can provide please let me know.

[@dperry428]

You might like to check out this video of mine. kzbin.info/www/bejne/oabdnmxtm82eoc0 Florenz Kroeber was a cabinet maker and had his movements made by other manufacturers such as New Haven, Gilberts and others. They stamped his name on the movements. The one in the video dates to around 1875 as there is a patent date of 1874 on it. Look for a patent date on your movement.

[@loganradd150]

@dperry428 thank you for the info The patent date on the movement is 1874 I'm feeling pretty lucky right now

[@dperry428]

Same as the one in my video.