Restoration of Antique Rusty Kerosene Oil Table Fan | 100 Years Old Fan

[@markm5908]

Wow. Caked in mud, blades still straight, bearings still packed with grease and no rust in the piston. What are the odds? Zero!

[@aahands]

😇

[@valeriomancuso6427]

I thought exactly the same. The initial condition is staged. Where did he find it? Under a tree? Please. And not even a tiny hole because of the rust?

[@Paul-fd3qb]

You are exactly right... Look at their last 5 video's - all the same mud with little to no rust pitting....

[@christopherlinger1554]

Also I’m pretty sure that there wasn’t Phillips head screws 100 years ago

[@Maricruz-d6l]

whats wrong with it?

[@AdventurerSurjadoy]

I think it was degraded forcefully before restoration

[@aahands]

😇

[@curtispederson9390]

Why??

[@imperialpresence1173]

thats called presentation...he still restored an unusual item and that in itself is pretty cool...

[@jucieljunior]

​@@imperialpresence1173 Ele não restaurou. Ele limpou a sujeira que ele mesmo fez.

[@ajizselam9116]

Fake restoration

[@aahands]

😇

[@LoveElectricStuff]

You know damned well that its fake​@@aahands

[@MrTabs4]

yes it is fake and there is more he hase two more wideos with same fan one is from 3 months ago another is from 6 months ago almoste all videos on this channel are posted two or three times with exaactly same devices and almost same titles

[@muhittinyıldız-g5l]

Fake or no l watch and you get out

[@LoveElectricStuff]

@@muhittinyıldız-g5l Gladly! I will not support a fraudulent POS.

[@vanpenguin22]

That layer of silt did a magnificent job of preserving the metal. A couple squirts of penetrating oil and that set screw practically backed itself out.

[@tukaramkamble3193]

मैं कभी ऐसे विडिओज देखता नही।लेकिन आज सौ साल पुराना सडा हुआ पंखा देखा और आपने जिस लगन से और कौशल से उस पंखे को नया कर के उसको इस्तेमाल में लाया,आपकी लगन और हार्ड वर्क काबिले तारीफ है।❤

[@merceariapinheiro8878]

Fake

[@aahands]

😇

[@ОлегХинко]

​@@aahandsWhy are you lying, man? Do you want more views?

[@AdolfZachrisson]

@@aahands please stop

[@jaytalbot1146]

But they got you to comment! All hail the algorithm!

[@cosmefulanito5933]

@@jaytalbot1146 The algorithm is also interested in reporting the video.

[@olgatit1888]

Ппосто обалдеть! Даже не представляла себе,что существуют такие аппараты. Раритет! ❤

[@aahands]

😇❤️

[@Foxkord44]

А тебя не смутили шурупы под крестовую отвертку, которые еще и открутились на изи)) В те времена их еще не существовало, это фейковая реставрация

[@olgatit1888]

@@Foxkord44 и что? Аппарат старинный, видно же. А крестовые шурупы значит позже меняли. И да, ты уверен, что я твоя ровесница, что тыка ешь тут? Если что у меня уже давно внук

[@RCPlanesAndTravels]

@@olgatit1888 это видно по вашей деменции. Бабуль, это интернет, тут могут и на хуй послать.

[@RCPlanesAndTravels]

@@olgatit1888 это видно по твоей деменции. Бабуль, это интернет, тут могут и на х*й послать.

[@Thematt11]

These fake restoration channels really are hitting a new low level of effort.

[@restaurart1978]

The piece is well preserved, but it was subjected to mud to make it appear deteriorated, it must certainly have been purposely stuck in the mud of the lagoon.

[@JohnLove-q3j]

Fakethat old with mud wood have much more pitting

[@johannapottie1553]

No offense but there is more mud than rust, a little water would have cleaned it up rather well

[@aahands]

😇

[@mistergsa1]

Just don't put the mud on in the first place. You can even see the smear marks of myd on the blades.

[@chrismayer3919]

All he had to do was slather it in mud then leave it to dry for a few days; VIOLA- instant antiquing

[@armandoarturorosabalsanche7173]

Uff,well done my friend, from, Bayamo, Cuba, god bless your hand

[@himanshunavani6922]

Badi tagri mahanat ke baad bada tagra or bariya response...pankha bariya or shandaar ho gaya... 100 saal purana hoga kam se kam ...Jaan AA gayi pankha m... Show ke or kabhi kabhi use Lena ke liye unike chize. ...ruf and tuf .. struggling.. full dismantle the fan ..

[@serafimpinho7532]

Excellent Maquilhage. In my Contry remove rust is so hard. I like de object for is something inocnue.

[@aahands]

Oh wow!

[@shanepowers7566]

Good job! Water’s free.

[@christophe8818]

Bonjour, merci pour cette vidéo. J'adore !👍

[@georgebrown8312]

I have never seen a fan like that before, and it runs on kerosene oil. Anyway, you did a beautiful job of restoring that kerosene oil fan. It looks much better and it works like a charm too. Excellent work I must say.

[@theexchipmunk]

It`s one of the few use cases of a sterling engine I have seen that is not a emergency generator that can run on anything that burns or super specialised use cases like powering a small military submarine. Pretty smart to use that for this device.

[@aahands]

Thank you very much!

[@aahands]

😇

[@dasabaja]

I'm hot! Let's introduce a new heat source to cool ourselves :)

[@garyv2196]

Ah, I just love the smell of lead paint.

[@jorgealvarado299]

Excelente trabajo

[@MASI_forging]

Outstanding workmanship 👏👏

[@pipapaquigrafos]

Hello, I believe that calling this work "restoration" is a bit of a stretch. I think more could be done. A warning should be given to anyone who publishes these types of videos, not everything counts to gain "views". I hope that's not the case.

[@superintendenciaprotecaoba3856]

Nem sabia que existia ventilador de querosene, interessante! A restauração ficou boa!

[@aahands]

Thanks 😊

[@торнадосорхота]

Плохо намазал глину надо было побольше комками наложить 😂

[@aahands]

😇

[@gregb76]

Wow, ice job. I have never seen a fan like this, and I am 67.

[@aahands]

😇

[@Life_Carpathian_Village]

Your videos always inspire me to live my best life. Thank you for this content!😉

[@aahands]

You are so welcome!

[@AdventurerSurjadoy]

Need 5x fast-forward

[@vanpenguin22]

It's a Sterling engine! That is soooo cool. I like that shade of green too.

[@johanntiu4162]

Sterling engine-powered appliances were much more common before electric motors became widespread.

[@botter097]

Rất hay, tuyệt vời.

[@aahands]

🥰😍

[@robertmyers5993]

My OCD wouldn't let me finish this video, my eye started twitching when you A) didn't use a any water or detergent to clean off the dirt. & B) The brass bell brush an your angle grinder... Nope. Anywho glad you "restored" it to your satisfaction, hope you enjoy it.

[@rohitshukla9756]

Great job done 👍

[@edsonluiz5280]

Esse motor e muito antigo.e conhecido por engolidor de 🔥🔥🔥

[@gilbertoabadio3147]

Valeu a transformação

[@aahands]

😇👍

[@franciscosilva8155]

Como é que isso funciona? Sem eletricidade, sem vapor... é mágica?

[@aahands]

It’s work with kerosene oil

[@Алик-Звездунов]

Amazing restoration😊👍🏻

[@aahands]

Thanks buddy 🥰

[@BashirAhmedQumbarani]

So beautiful Restoration amazing👍

[@aahands]

Thank you! Cheers!

[@adrianclehmann]

The correct name for this type of fan is an Erickson Cycle or Stirling Hot Air Engine. A flame heats the displacement piston that transfers the hot expanded air into the power piston, thus repeating in a closed engine. I have a fan of this same design and it is a reproduction of a 19th century KYCO fan style made in England. I ordered mine new from Pakistan in the 1980s and its also blue in colour. It cost $600 Australian. I doubt they cost much more now. This fan looks as though it has been in a flood. Probably not as old as you think but the design is old. They pre-date steam engine technology and were never seen as a real power source but were useful for areas with no electricity. NASA developed a similar engine that used compressed hydrogen internally instead of air. That engine was solar powered and developed several thousand horse power. It was mounted at the focal point of a sun tracking solar dish and ran an electricity generator. Nasa even had one running a car. All experimental though. Lots of info available online. A ship was even built running the same type of engine and it wasn't successful. It was powered by coal. The engines were very large and required a lot of coal. In the end there was no room left for any cargo so the engines were replaced with steam engines that produced much more power. Great to see one being cleaned up and saved from the scrap heap. Great effort. A unique part of the pre steam era of the industrial revolution. www.reddit.com/r/WeirdWheels/comments/p22t61/1979_doe_nasa_amc_spirit_dl_with_a_stirling_engine/?rdt=65469 www.stirlingengine.com/forums/viewtopic.php?t=553

[@adiltaj-d2m]

Amazaing bro

[@aahands]

😇

[@حسنفاضل-ش4ش]

جميل جدا جدا وعاشت اليدي ❤

[@aahands]

Thanks for your appreciation 😇

[@jamesroberts2115]

That rust doesn't look like the rust I know. More like red mud dried to red dirt.

[@ThomasWinders]

Never seen a kerosene fan. Is It working with a Stirling engine? By the way, green and black painting Is quite a punch in the eye 😬

[@AbderahimHaddani]

THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@aahands]

😇

[@سلمانكيّوش]

رائع... أهنئك..

[@aahands]

Thanks 😊

[@MuhammadAzam-xs9bv]

Super nice out Claas antique fan 👍

[@aahands]

Thanks 😊

[@SWZTV]

Amazing Stuff

[@tetovanej374]

good job

[@aahands]

Thanks

[@RonaldoSilva-tn8in]

Restaurado ventilador de mesa a oléo querosene sem energia elétrica🔌 😉

[@aahands]

😇

[@shehryarhassan]

Superb❤❤❤❤❤❤❤

[@aahands]

Thanks 🤗

[@sergiomuniz9761]

Nunca imaginei que tinha ventilador a movido com combustível

[@billseggie4578]

No thread lock on any of the assembly screws? Why?

[@mahendrap1960]

Best fan for those who don't pay electricity bills lol

[@aahands]

👍😅

[@yuckabuster]

Nice job but... bright green ?

[@JulioCochrane-lq1po]

Nice job buddy

[@aahands]

😇❤️

[@cosmefulanito5933]

@@aahands Reported video.

[@eduardoz51ear]

Conocía heladeras y lavarropas a Kerosene, pero no ventiladores. Muy interesante !

[@aahands]

They were also existed

[@CarlitofransemBarbosaBarbo-o6d]

É a primeira vez que vejo um ventilador desse modelo muinto bom seu trabalho eu amo as coisa mais antigas são mais resistente ❤

[@aahands]

Thanks 😊

[@donsmith7722]

It's a beautiful restoration, but you go much too slow doing it.

[@aahands]

😇

[@mred8002]

Just increase the playback speed if it troubles you.

[@stevedoolanTacoma]

It looks like the fan was caked in mud and then baked at a low temperature. It may have been given to him like that. Overall, I would give this video a 2 out of five. Sorry for the crappy comment. 😎

[@LyVanToan-vn2tq]

Hello 🥰🥰🥰🙏🙏🙏

[@josecepeda1463]

Está padrísimo el abanico y de gas genial verdad 👍👍👍👍👍

[@aahands]

Right

[@Marvel14-gg3zh]

Semangat ya Om

[@RCPlanesAndTravels]

The dirt was applied to the fan with a brush )))

[@christokaloudis2050]

Better than the crap we have today well done

[@jaimemontaner3801]

I don’t think this is fake. The fan may have been made to look worst than it actually was but it was still a beautiful restoration.

[@aahands]

Thanks for your appreciation 😇

[@billseggie4578]

What about exhaust fumes from the motor?

[@aahands]

No its For Supplication

[@delmarleite4041]

I'm here not to see the "restoration", but to see how the table fan works...!🇧🇷

[@natalynataly6018]

Приобретите себе пескоструйку, и мир заиграет совсем другими красками😁

[@aahands]

😇😃

[@Alex_R88]

ему и так весело

[@KeithLyons-z4h]

So this old fan works similar to a stirling engine?

[@rasmusronkonharju9929]

AA- Hands My name is Rasmus Rönkönharju and I want to ask you this question what is the best thing whit restoring things in your opinion

[@haydertaher3286]

My brother, your work is very beautiful, but I advise you to use sandblasting. It saves you effort, time and money.

[@aahands]

Thanks for your appreciation 😇 Yeah! Of course we will try to use sandblasting

[@1chesli]

Я понял, что перед созданием такого видео, нужно погуще облить объект реставрации жидкой глиной.

[@angelgonzalo2885]

Algún martillazo tambien habria quedao bien.

[@AncientEgyptArchitecture]

Please get a sandblaster.

[@dipakdas6887]

I need I live rent room Assam Guwahati India Single fan i used monthly electric bill is 350/-

[@aahands]

❤️

[@АндрейХарченко-щ9х]

Incredibile

[@aahands]

Thanks

[@petepeterson4540]

looks like it was laying buried in a caleche bed

[@donaldalexanderrichards4422]

It was buried in mud for a couple days then bake in the oven for half an hour before torn apart for restoration

[@aahands]

No sir

[@aahands]

🥰

[@markkeith9055]

I wonder in a hundred years if someone restores the same fan.

[@deleihenriquebarros]

Why put mud on the piece? If it weren't for that fact, it would be an excellent video.

[@muhittinyıldız-g5l]

Real restoration

[@aahands]

😇

[@Superbob396]

Nostalgia

[@aahands]

😃

[@aarondwyer3746]

Beautiful job on restoration

[@aahands]

Thank you very much!

[@oficinaaccarraro4445]

Ava....um vídeo cheio de frescura pegando parafusos com pinça, e no final não se mostra os detalhes de funcionamento Muito fraquinho esse vídeo

[@revolcane]

No access to a sand blaster?

[@vanpenguin22]

Had that spent a few years on, say, a creek bed?

[@BennyCFD]

Hmmmmm.........Lots of dried dirt and not enough rust or rust pitting.

[@aahands]

😇

[@fiks8888]

Isn't it easier to wash the dirt with water? Is it better to scrape?

[@РоманТолочко-д5н]

100 лет назад таких технологий уже не было,электричество было во всю....🤷😁

[@aahands]

Its exist more than 100 years ago

[@mistergsa1]

You can even see the smear marks of the mud on the blades If you try and fool us - you failed. Not watching any of your videos again,

[@aahands]

Try to watch our next upcoming vides they would be better and improved 😇

[@Thematt11]

@@aahands You could improve them by not faking them.

[@NELLYSCHASE]

Amazing transformation! Great job on this!

[@aahands]

Thank you so much!

[@CibayatberkahCibayatberkah]

Kamu.orang.nyah.kerakti.pang.dai.semoga.sukses.amin.

[@AshokbhaiPatel-g2o]

❤ ખુબ સરસ

[@kevinbonville]

Drop it twice dirt fall off. Restored!!!!! Since when did mud have brush strokes?? Lol😅😅😅😅

[@JLCra87]

It would be awesome to see you restore these awesome historical things without trashing them first. It's not necessary man, it's really not. People will still watch. Promise you.

[@takis12345]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@aahands]

😍🥰

[@bayadere8308]

Obviously a fake, but the problem is 68k views in 5 days. The gullibility of some people...

[@ВладимирПешков-э3р]

Сто лет срали голуби?

[@evgenijkern]

❤🎉😊

[@mfreda]

Like it when he said let’s remove the rust. Looks like clay to me. This one looks so obvious

[@Pdor_figlio_di_Kmer]

Where did you find that fan? In Pompei? Either that or in the aftermath of a Lahar.

[@Dorna-c5x]

supongo que en invirno se calentará con un aparato que funcione con hielo

[@The-Scots-man]

Did you cover this in sand and then bake it dry?

[@Tunderbolt1000Tfan1]

Old fans are from metal from 100 years ago

[@jjj68rrr]

Керосин. Представляю как этот вентилятор вонял