Restoration the Rusty Old Drill // Rusty Motorized Rugged Version

Old Rusty drill Restoration // Solid Version With Rusted Motor.
In this video, I bought an old bench drill at the scrap yard. Its price is so cheap that it startled me. Drilling diameter (in mm) 6mm, 10mm, 13mm, 16mm, 20mm, 22mm, 25mm, 32mm. I feel the need for a recovery. It's super rusty on the bottom and very dirty but it still works. So I started with disassembling, what turned out to be very complicated. Like new creations and buildings and can also be restored. I hope you find something useful and interesting from this video! I am very happy to receive your feedback, advice and suggestions to improve myself more and more. !!! I apologize for the mistakes if I have made in this restoration!!! Thank you very much follow me:
Skill Recovery

[@valdemargomes5100]

FICOU NOVA E CHIK PARABENS PELA RESTAURAÇÁO NOTA 3000

[@jamescraig5421]

Hell of a Restoration Bro.👏🏻👏🏻👏🏻

[@AandB1998]

It's one thing to give the man a piece of advice on how to do it better, and another to just complain about how he chose to do it. For those that are the complainers, you may restore yours as you see fit. Assuming of course that you will get off your butt and do it. His method still worked. This project turned out just fine and I appreciate your effort in restoring this tool. Thank you!

[@SteampunkStyle]

Look, they really have new bearings available to sell in their country! 😂😂😂

[@RamKishan-em3lp]

Very Nice and very hard work 👌

[@atlnmurthy3330]

Dear friend, you did a great job and unfortunately you made few mistakes: you should never use a metal rod to remove cast iron parts. Result - the parts will break. Insted you would have used a wood log. Most important is the drilling bed. No where in the world any body will paint the drilling surface bed. It should be neatly polished with the maximum available smooth emery sheet and keep always oiled. Otherwise, the restoration has done well. Still I feel it would have been done better with little patience. Good luck.

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@georgebrown8312]

Great work and the drill press works like a charm as well. Just like new.

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@rolandolievanoagudelo.5112]

Muy buena restauración maestro felicitaciones.

[@RestorationAustralia]

Well done.

[@restorationsskills4967]

Thank you very much

[@Miricrafts]

Hard work but very nice result 👍

[@restorationsskills4967]

I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this! Thanks for watching and supporting me. Thank you very much!!!

[@user-ej9ex7zd4w]

Поломал станок , а потом и ещё покрасил не то , что надо и не в тот цвет . По чугунным деталям запрещено бить железным молотком .

[@restorationsskills4967]

I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!

[@linus031961]

Great work. But why do you paint the chassis without knowing if it's working or not ?

[@restorationsskills4967]

Thanks for watching and supporting me. Thanks very much!!!

[@sddiymakeitworthit7512]

Really awesome 👏 job like new 👍

[@danielgeraldo2826]

Ótimo trabalho, ficou uma maravilha! Parabéns pelo seu vidio.

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@Austeration]

Turned out great amd👍 I even like the orange paint. Nice work.

[@Tatal.b]

Parabéns ! Trabalho de gente sabida👍👍👍👍👏👏👏👏👏👏👏👏😟🍀🇧🇷

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@ferd.6779]

Good job, and nice result for many years to come!

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@orchidlove-kz2ky]

Hello friend. Nice to meet you. I'm enjoying your video.

[@Forestcamp313]

Great restoration bro......thanks

[@restorationsskills4967]

Tôi rất vui khi nhận được những phản hồi, lời khuyên, góp ý của các bạn để ngày càng hoàn thiện mình hơn !!! Tôi xin lỗi vì sai sót nếu tôi đã thực hiện trong lần phục chế này !!! Cảm ơn các bạn đã xem video.

[@zsuzsu2657]

Привалочную поверхность красить? Дилетант!!! ДИЗ, ДИЗ, ДИЗ!

[@misha_pankof]

Правильно говоришь

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@TedsEscapades]

I enjoyed the restoration, but please either crimp or solder your motor joints as it is a electrical safety and massive fire risk if you just twist the wires. I concur with the comment about using a steel rod

[@restorationsskills4967]

I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this! Thanks for watching and supporting me. Thank you very much!!!

[@ddrusa]

I notice that your paint signature is orange and black

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@ddrusa]

@@restorationsskills4967 Any time

[@HNIZAR45]

Nice work

[@restorationsskills4967]

Tôi rất vui khi nhận được những phản hồi, lời khuyên, góp ý của các bạn để ngày càng hoàn thiện mình hơn !!! Tôi xin lỗi vì sai sót nếu tôi đã thực hiện trong lần phục chế này !!! Cảm ơn các bạn đã xem video.

[@jimbaldacchino3755]

well done

[@restorationsskills4967]

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video.

[@robertobezerra8376]

Jóia 👏👏👏👏👏👏💯💯👍👍🇧🇷

[@restorationsskills4967]

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the error in this Restoration

[@larrykelly2838]

Nice

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@claudelannois8821]

Vite fait bien fait ? 🤔🤔🤔🤔🤔🤔

[@restorationsskills4967]

I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better !!!I Apologize For The Mistake If I have Made In This Restoration !!!Thank You For Watching The Video. Don't Forget To Like And Subscribe To Channels

[@user-gw6en2pu3f]

Где ты берёш такой хлам?

[@user-cn9of3lv9w]

Супер 😀😀😀👌🏼👌🏼👌🏼

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@summerpowder6540]

👍🏽👍🏽👍🏽

[@restorationsskills4967]

I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better

[@wilburowens3056]

No sound and it a rerun show

[@bighairynuts4u]

destroyed that drill, smh

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@churlepatakha]

Your cleaning process is casual and poor, the brushing wheel is used superficially. Needs a lot of improvement in cleaning and painting!

[@user-pg8st8sy7j]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@KOKO-jo6ty]

lasy job!!!!!!

[@restorationsskills4967]

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

[@rcr1390]

???

[@restorationsskills4967]

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!

[@nancyblanchard7218]

well done

[@restorationsskills4967]

Tôi rất vui khi nhận được những phản hồi, lời khuyên, góp ý của các bạn để ngày càng hoàn thiện mình hơn !!! Tôi xin lỗi vì sai sót nếu tôi đã thực hiện trong lần phục chế này !!! Cảm ơn các bạn đã xem video.