Nissan B11 Engine full Restoration

Nissan B11 Engine full Restoration

[@rofe]

Nissan Sunny GearBox Restoration (B11) | Manual Transmission Gearbox Assembly and Disassembly kzbin.info/www/bejne/pZKndmemhMaSgZY

[@Sagzor]

🇱🇰 ලංකාවේ ගැම්ම

[@felipemoya3284]

Faster with air tools?

[@sudarshanidilrukshi1517]

Malle oya coheda ape b11 car aka hadaganna

[@CT_Jayasinghe]

Me engine ek kiyak unada

[@jagathsiri601]

@@sudarshanidilrukshi1517@1517

[@jag_3d]

I bought my Nissan Sunny B12 1989 recently and I have been learning a lot about how its engine works, this gave a better understanding! I really appreciate your work here, amazing!

[@kosalaherath2360]

සෑහෙන කාලයක් restoration video බැලුවා.. අැයි අපිට බැරි කියලා හිතුන වාර අනන්තයි.. මේක දැක්කහම මාරම අාඩම්බරයක් දැනුනේ.. සුපිරිම වැඩ්ඩෙක් බ්‍රෝ ඔයා..දිගටම මේ වගේ video එනකම් අපි බලාගෙන ඉන්නවා ❤️

[@curm1778]

Babu, fabulous work as always. But, you need to clean the water jacket, too. There's a lot of scale built up in there. That motor might just overheat from poor coolant flow. Still, it looks and sounds great. Good work.

[@isurudilshan8534]

නියමයි ..මේ වගේ සුපිරි වැඩ්ඩො ලංකාවේ ඉන්න එක ගැන සතුටුයි ❤️❤️❤️

[@kodagodamadusani196]

Mya kohada .pone namber eka danne

[@wwiewolle5849]

An another perfect job! As I have said before, this man is a phenomenon! 👌🛠👍 Is there anything that he cannot restore or repair? 🤔 I don't think so! 👍

[@restorationh.i.a7139]

hi, i'm new to this business, can you see how i restore??.

[@josebezerra7383]

O melhor mecânico que eu já vi parabéns 👏👏👏

[@LeonorLozanoServellon]

Es por esto que pago el interner!!! Es hermoso muy bien explicado y sin decir una palabra

[@DanielMartinez-se7ds]

Espectacular que buen trabajo y rapido yo tengo un auto con ese motor felicitaciones quedo divino nadie se toma esos detayes tambien logrados saludos desde montevideo Uruguay

[@Mad-Duk_Machine_Werkes]

The Block was not Hot-Tanked or cleaned properly- LOOK at the buildup in the water jackets! Yuck!

[@FS-uy1no]

The only thing that concerns me are the cooling channels. I remember when i was restoring my tractor engine, I used some hard steel wire to scrape most of the scale on the inside off, wasn t perfect but it did the job.

[@andysaunders3708]

Shit, man. That's a masterpiece. Idles so smooth. I've missed that sound. Haven't seen anything running an E-series in at least 10 years. Fantastic job,. Really. Wish I had your enthusiasm.

[@bangndandun2032]

thanks bro. after viewing your content! I got excited about my profession as a novice mechanic.

[@Jarisson--Jari]

Rofe, um dos melhores restauradores do KZbin

[@restorationh.i.a7139]

hi, i'm new to this business, can you see how i restore??.

[@wifigratis3900]

Ruaarre binasaahh....👍👍👍

[@TheJuangiron]

Desde El Salvador 🇸🇻. Excelente trabajo. 🤭

[@fariduni_life]

Yeah, that is pretty easy, if the engine was removed But it is really hard if the engine wasn't...

[@williamgonzalez1860]

Was really hooping he would get the calcium deposits in the water Channels but besides that did great

[@restorationh.i.a7139]

hi, i'm new to this business, can you see how i restore??.

[@ferd.6779]

Well done as usual, I could'nt see how you did the piston/and rings in the cilinders...nice video continue sir!!

[@israfilekiz2288]

Motor tamir calismasa Acil degistir 2 dk alir Bosa ugrasma ustam 293 Acl degis 3 dumadi ha birak orda kalsin ustasi var slm

[@jimmyfleebot]

Bit rough on the cam shaft there bro, you know those lobes are precision machined surfaces? You smash on them like that, only bad comes from that.

[@andysaunders3708]

Hey, just to be pedantic: Yes, that is an engine from a B11, but it's an E-series. Check it out on Wikipedia if you don't believe me. I owned a stack of these things, and they were also in the N12 Pulsar, and many others. The early ones had bad head problems, due to poor casting, but they were a fine engine if you got a good one. There were even some turbo versions. Love your video.

[@aaronraida1882]

You shouldn't put oil behind the bearings it messes up the clearances makes the bearings more likely to spin

[@ashishpatel4820]

How would you even remember which nut bolt to put back 🤔 you are great

[@satsingh1205]

EXPERIENCE , EXPERIENCE AND EXPERIENCE .............

[@motorsportsbd]

OH MY GOD! sir its just very very helpfull for the whole automotive world i believe. sir please make a video with toyota 4efe or 5efe engine sir. thank you so much sir . love you forever and want more engine restore episode . respect to you 😍❤🚗

[@SobolevAlexx]

Ваши видио мне больше хороших чувств дает !

[@viajandoconhernan9237]

Excelente b11 y b12 es un buen motor sin dudarlo

[@Rockardo_]

It would be awesome if some company like husky, tekton, or any of the lower end tool companies would give them a tool package

[@angeshdarsan8606]

The engine sounds really nice ,job well done

[@TeshomeAtire1965]

Nice speed of disassembling!!

[@hawazkiflezghi5433]

I have this tipe of engine thanks for ur lessons bro great job

[@danfor501]

Por fin un video donde no estrangulan ese motor 👍👌

[@230919600]

Hope you are wearing a mask your chest be careful fantastic work thank you

[@BigGrizzlyBob]

where do you find parts for this engine and what carb do you use?

[@gutierrezjosear]

Desde Puerto Rico 🇵🇷 exelente trabajo motor Nissan Sentra Sunny B11 🔥💪🏻

[@mannyperez9723]

And that is how you spin bearings. 😆

[@Looney_YKT]

Чувак вышел на новый уровень однозначно лайк, растет епросоты👍

[@dmedia87]

woooo..... lankawe mehema engineers la inna ekath adambarayak!!!

[@saikrishna7364]

good skilled work but wear gloves to your hands it will protect u from injuries

[@yungBitta291]

It would be nice if you showed finished product then put your previous video up with maybe a still photo of before and after next to each other then your video would be way better

[@andysaunders3708]

From memory, the B11 had an overdrive 4th gear, and on the 5 speed, another even taller overdrive. I'd own another one, any day.

[@user-ny6qo3os5l]

У меня есть такая машина в отличном состоянии

[@leondejuda2191]

TODO LA FORMA DE DESARMAR Y ARMAR TODO ESO ES COMO UN MECANICO PROFESIONAL DEBE TRABAJAR Y REPARAR UN MOTOR ,EL TRABAJO EXCELENTE ,YO TENGO ACA EN PERU UN NISAN SUNNY ,B11 ,1983 , STATION WAGON PERO EL MECANICO LO REPARO PERO VEO QUE LE FALTA FUERZA AL MOTOR Y ESO QUE COMPRE TODO LA REPARACION ,

[@KusalVlogs]

එකෙම්ම සුපිරියක් ❤

[@TheLittleMasterLk]

ඔක්කොම හදල ලූස් ඔයිල් දාන එක තමා හිත රිදෙන්නෙ 🤓

[@MechRider89]

little scary they're running ATF in an engine.......that wont last long. One they also did wrong was lubricate bearings on the non journal side, great way to spin a bearing.

[@lazarusdevenom6991]

Can you please send me how vacuum advancer vacuum lines are connected? There is a vacuum delay switch between distributor and carburetor. But I want to know how it correctly fix

[@brianlindauer4084]

Awesome work. Loved watching this.

[@attahirimohamed1832]

Excellent travail, mais en termes de sécurité, c'est très faible, alors conseil, je voulais des chaussures de sécurité

[@restorationh.i.a7139]

hi, i'm new to this business, can you see how i restore??.

[@MrDmagic88]

Great job! Man I sure could use this motor🤦🏾‍♂️

[@simonlimon3098]

You guys are MASTERS!!! hey can you do diecel engines? I'm trying to get my small diecel engine mechanic license...can you give me advice?

[@slrambo6842]

, ලංකාවේ ගැම්මක් තමයි

[@JC-yc4ez]

superb ! are u srilankan ?

[@osvaldocarvalho1633]

Trabalho muito bom você é muito inteligente aqui é Brasil

[@restorationh.i.a7139]

hi, i'm new to this business, can you see how i restore??.

[@remembergodisalwayswithyou6862]

Hey from Morocco nice job 💟

[@user-rq5nc8cs9u]

Молодцы ребята 👍

[@sanduntharaka7829]

niyamaey aiya ikmanata thawa video ekak oni

[@Budivedder]

I like your work

[@thierrypeloin3759]

Bravo l'artiste !!! Splendide

[@gamingwithishanka]

Real Srilankan වැඩ්ඩෙක් නිසා Subscribe කලා 😍

[@user-fn1nf2fm9p]

Отличная работа) один вопрос что так мало столов рабочих?))

[@sdmadhwaraj6355]

Wow!!!! Amazing work bro, where do you live bro?

[@lartsevevgenii6640]

Absolutely cool!

[@goldandsilverfacts]

how long did this take from start to finish ? 10 hrs, 20 hrs 50 hrs? Thanks great video

[@rajeshbehare3692]

Ek dum mast bro

[@dayalanvadivelloo8893]

How much is it to do the restoration? And where is this place?

[@charitybrown4274]

Awesome Job !!👍😁

[@karthiksrirangam2484]

Good job, need much patientce 👍

[@LuisCastillo-em5bp]

Muy buen travajo 🇵🇦👊💪👏👌

[@CarsRestored]

Me: No way he can restore this Restoration: Hold my tools

[@dulanjaoshadha3362]

අය්යේ මේ video එක නම් super මමත් මේක බලල Engine eka ගැලෙව්වා දැන් එකේ තියන විදිහ කියල දෙන්න පුලුවන්ද

[@Tenkaichibudokai22]

Show us the B11 in its full splendor

[@praetorangel8967]

More lathe footage, you don’t need to change your channel or anything, just put more or longer clips of turning when you do it.

[@adithyadesilva5654]

මචන් ඕය වගේ වීඩියෝස් බලල ඉගෙන ගන්න ළමයෙකුට බෙයාරින් සෙට් වෙන තාලෙ..ඕවලැප් එකට අරන් ටයිමින් මාර්ක්ස් වලට තියන තාලෙ ,ඩිස්ටිබියුටරෙන් කොහොමද ෆ්ලග් වයර් ගහන්න ඕඩරේ ගොයාගන්නෙ වගේ දේවලුත් පේන්න දැන්ම නම් ගොඩක් වටී .. 🤘💜️

[@dilankadissanayaka4590]

සුපිරි අයියා..❤️❤️

[@tanlain4381]

Yes they are strong, don't need power tools all the time. They called (Engine -Down ) maybe put it back to the same Vehicle or make a Jeep or make Utility Taxi. Low cost under $1000 US $ to Clean Engine (Engine -Down) for cars, Trucks double but Bookings schedule long as the usual .

[@mrdhurke210]

Tvs xl 100 luna ke engine se kaltiwettar banake dikaye

[@230919600]

Well done great hands

[@tariqsalah9492]

Amazing job Keep going guys

[@YOJHANKUSTOMSOFFICIAL]

Full Engine Restauration Cars

[@ayeshatariq2009]

should add the voice for fitting commentry it usedful to us to understand the fitting of engine

[@eugeniaisabelmartinezramos3895]

👍💪 muy bien ..!!! Felicidades!!!

[@restorationh.i.a7139]

hi, i'm new to this business, can you see how i restore??.

[@kgk7987]

Car engine is more complicated so they had to go level up, they went barefoot. 😳

[@sanuthdulran5483]

නියමයි අයියේ❤️😋

[@nastv9228]

Look at that clean hands and manicured nails,is he really a mechanic?

[@IbrahimKbc]

Good works

[@tasfiablogs2.0]

Super video

[@cheppymulyana6733]

Requez restoration engine mitsubishi galant vr4 dohc 🙏

[@aku7598]

It looks like you removed water pump without removing timing belt.

[@udayakumarasampath8351]

මාරු අයියා ජය වේවා

[@pasanpramodya4728]

Superb

[@nightshadow5328]

Красава 👍👍👍👍

[@homeofmovie7433]

පට්ට වැඩ්ඩො ❤️❤️

[@ashutoshsamindar7350]

Bros your awaome hatsoff keep on bro, GBU

[@SenzosAdventures]

You guys rock!!!

[@jimmybrewer8289]

Good job 🌟🌟🌟🌟🌟

[@emilianoperezdominguez8642]

Después, restauración de ese carro

[@manmen1467]

වැඩ්ඩො නම් වැඩ්ඩෝ ❤

[@SangOperator]

Nice good job 👌👍👍👍

[@rofe]

Thanks

[@jani6966]

Hello can you make a 4g93 engine restoration video please🙏

[@TiborSzarvas]

You should add which engine is it to the description. E13 or E15?

[@samboybanquite1313]

So amazing