Restore and fix faded plastic trim on your car

Trim Kote:
store.detailking.com/car-trim-...
Shop Towels:
store.detailking.com/auto-shop...
Shop Towels on a roll:
store.detailking.com/heavy-dut...
Revival Trim Dressing:
store.detailking.com/best-trim...
In this video we show you how you can restore the look to your faded plastic trim on your car using simply a shop towel and the Detail King Trim Kote Plastic trim Dye.

[@joshuawoodman6603]

Mothers back to black is a really good choice for plastic and rubber. 9 bucks for a bottle at walmart, lasted for my entire car. Not as black as spray paint would be, but a lot less risky to use since you can wipe it up with soapy water and shouldn't need to mask off anything. Worked wonders for my 05 CR-V.

[@cutsrosescents4950]

I don't clean my place. But I have spent 20 hours straight detailing my motorcycle.

[@DetailKing]

Life of a detailer!! lol

[@RamonNunezRey]

Lol

[@jasonkresock2196]

Amen

[@americanpatriot8426]

Cuts rose scents I was thinking the same thing

[@bilalpatel8261]

@Cuts rose scents , are there any specific motorcycle products you use ?

[@jy2693]

6:02 - I can appreciate a guy that passionate about his work! Good video buddy

[@davebowman2534]

I was skeptical about how good this product would be. I got some through an online source to try out. I did the recommended cleaning of the plastic trim on a 1999 Honda C-RV that had never had any treatment since new. The front and back bumper cover were near white after cleaning. I used denatured alcohol to wipe down with prior to applying the trim coat. I put two coatings on the rear bumper cover and the transformation was dramatic to say the least. From a near white/gray to a vivid black color. I did use an old toothbrush to get into the seams where the rag would not reach to cover those areas. This product is not cheap but then neither is the quality you get from the results of using this trim coat from DK. Spend the money get the right product the first time you won't be disappointed!

[@NickM1013]

I'm thinking this would work great for my faded windshield wipers and truck bed liner. Very nice results, thanks for sharing.

[@2010stoof]

I much prefer solution finish for this type of stuff. One tip of the open bottle on applicator will cover almost a whole bumper. As a plus, it won't hurt paint and just wipes right off paintwork. No tape needed and fully black most times in one application. That seemed like a whole lot for a door handle lol. But thanks for the video. Always appreciate seeing other products

[@TheTiquino]

Surpreendente!! Congratulations.

[@VirberelloScooterTips]

Thank you for making this video Keep up the excellent work. I'm impressed.

[@Vertabraker101]

I would recommend taking the tape off as a final shot. In all GREAT vid. Very informative. Thx!

[@djbillye4943]

I dyed the windows aswell.worked great!

[@wardmcdermott923]

Didn't even know that these products existed, thank you. Need this in Arizona.

[@DetailKing]

Thank you Ward, you guys are why we do what we do! If you're interested in getting Trim Kote in Arizona, you can purchase it online and we'll send it out to you. It can be purchased on our store if you're interested: store.detailking.com/car-trim-restorer-black

[@UnknowPresence]

Liquid shoe polish does the same thing I’ve used it for years and much cheaper.

[@jamandpot]

Unknown Presence are you seious? I still looking for effective solution after years....

[@miltonjasso5843]

great information, got your self a new subscriber

[@boblatzer]

I watched 10 trim restoration videos. 10 different solutions, each one apparently the best. Who do I believe?

[@matthewread4146]

Dye wont last long, best way i have found is to use a heat gun

[@LydonLewisDoUbLeZz]

DUUUUDE!!!! THANKYOU!!!!! I've been going over all sorts of options to restore the bumpers on my trailblazer but I think I'm going to give this a shot I was about to try the heat gun method but I'd rather do this just to be safe!!!❤️❤️❤️😁😁😁

[@jeffruebens8355]

ChrisFix has a recent video about using a ceramic coating for paint, for hard unpainted plastic. I use Turtle Wax Trim Restorer every few months, and sometimes a layer of Nu Finish polish on top.

[@XOjmmXO]

FYI..used this on my golf cart and got some on the vinyl and the plastic not realizing it until it was dry. Diluted DK Magic sprayed on a clean rag, and it came right off!! We LOVE Magic!!

[@cfldentrepair]

Great video! Thanks for sharing👍🏻

[@tegan71969]

I use Industrial Strength Silicone Lubricant to shine up and restore my plastics. Works like a charm.

[@saabreplay7553]

Excellent video. Thank you

[@randomrangoon5476]

Good stuff. Thank you

[@madman8708]

I normally use cheap mat black spray paint for these kind of work and it works

[@Unboxx_It]

Looks like a little didn't go a long way

[@djdalite]

lol my thought exactly

[@therealsolo23]

Exactly what i had in mind lol *little goes a long way (:

[@CyberMacGyver]

I was thinking the same 😒

[@ElPresidenteBuzzard]

I was coming to the comments to say the same thing, lol.

[@HighDefinitionVideo]

Still huge improvement

[@mariofalfan2997]

Forever Black works very nice on that faded black trim!

[@dustin3700]

Just used this on my wife's car. I honestly don't like the way it dries fast. I'm glad I tested it before I used it on a customers car first. I will stick with car pro pearl for a dressing or solution finish for a permanent fix. A little also doesn't go a long way "for me at least" if you try to stretch the product out it will dry to fast then streak and you have to apply another coat until you get it right.

[@tonykari5124]

Good vid. Thanks. I've used black spray paint before & it lasted forever. Just an idea ...

[@L318BLACKSHEEP]

Honey I really want this car even though it has over 234K miles on it. I just can't get over how great the door handles look. take my money used car salesman

[@stephenwhited1833]

Super Heroes on Wheels in Bandera Texas uses automatic transmission fluid. Works very well and lasts at least 6 mos.

[@rikholliday8899]

Nice job in your video. What do you suggest for scratched Plastic (ABS) trim?

[@304turner6]

I use stuff called wipe-new, it makes your faded plastic trim look brand new and almost as glossy as glass.

[@drunio1504]

You gotta luv KZbin where everyone's an expert and a social critic. Let's see your helpful video.

[@patrickleniqueur8474]

loooooool good solution to sell your product

[@sn0m0ns40]

I like a gradual transition from grey to black

[@superstartheghost]

thanks!

[@taunjiachandler6607]

303 aerospace protection. It's great for rubber, vinyl, plastic and more. Just did a couple of 20$ tires from pick n pull and they look brand new. Was gonna send a pic but didnt work.

[@vasm1807]

can it be applied to interior trim panels? for instance center consoles or lower dash panels that get pretty dull with age

[@MsJustBeingMe23]

my suv has silver over spray all over it cuz my person said i could just use lacquer thinner to clean it off..yet paint turned out fabulous looking so before i use your product what do you recommend?

[@cookiemonster53]

I have a fat marker for large areas or Sharpie for the hard to reach places ;) LOL

[@pacificH2O]

Hi, Can you use the same product to treat scratches in the interior? Thanks!

[@mrphimmasone6249]

What is the name of the dye. Thanks for video. Vary helpful

[@gardyslaw4779]

Should you tape off the lock, just in case?

[@toddcragun9656]

Hey thanks for sharing. That is a great tip. What is the name of the dye?

[@khoily00]

Does it work on black rubber trims around the windows?

[@hotelgulf]

Do you plan to add a dark brown? I have a Volvo V70XC in need of some TLC. Thx-

[@ThatGuy-kd9sd]

I use tire black for my plastic and bumper trimmings

[@joe7665]

looks better then new

[@japautosalon]

Looks very much like quadrons old stock they used to have in the 90s? I used to use this very same kit when at Ferrari egham ?

[@bobstanden6579]

Use 50+ sun screen cream works a treat on black plastic trim

[@Gleng15]

How long did you wait for the dye dry before rubbing the finishing paste on?

[@vinfish4697]

Nice job so is the heat gun fix a temporary fix

[@robertkopp873]

Ok. Just an advert for his products. "Talk to our sales reps ..."

[@craftman5632]

Use a damp rag with armor all, if you really want that black plastic to shine, a damp rag with a little bit of clean motor oil.

[@axtra92]

it takes that much for just a door handle?!

[@aldobiglari4575]

How is this product for the interior faded black door panels where the door handles are? Please let me know.

[@kevinrosier8619]

The best way to remove, not cover up wax that gets in your plastic trim is a simple pink pencil eraser. It takes some elbow grease but try it, you'll thank me I promise.

[@uniculCSM]

Can you use the product on tires?

[@boobam3648]

expecially. i love that word.

[@Bigshoots86]

I used olive oil on my fiance's Hyundai very light handedly and that was 2 months ago and it looks great, no dust or dirt accumulation either

[@SKloth-qp3gk]

I did the same on my Nissan Xterra.. Works great..

[@johnemmel8220]

how long does it need to cure before getting wet... like rain.. dew... first wash

[@MrTheHillfolk]

This stuff looks similar to the griots garage bumper and trim restorer. Unfortunately they changed their formula from a liquid to a gel and I haven't heard good things about it. I'm using the last of my (liquid)bottle sparingly, but from the looks of it , I may have found a replacement! That stuff lasted 2-3-4yrs I'll attest to it.

[@75ss]

Do you have anything for the rubber by the window glass?

[@shelmadinegalloway2480]

*🌞We🗺color coat🌌it or put on Chrome covers👍🏾*

[@texver18]

yo utilizo 3d desde hace tiempo

[@theeabster1983]

Have you ever tried the heat gun message?

[@iamanoobiecheez]

Can this be applied on windows black rubber trim too?

[@GoForGold256]

Between 6:02 and 6:08 the masking tape changes... Is this just a magicians trick? 🤔🤔🤔

[@thevideostump46239]

your right! if you look at the lay of the tape, they changed it, why!??

[@Doser735]

Wow. Good eye

[@ShawnjHiggins]

Because he had to add 8 more coats!

[@ryanbrandt3374]

Can you do a vid on conditioning leather and suede seats without getting the conditioner on the suede?

[@DetailKing]

That's on our list of videos to do Ryan! In the meantime, I would suggest masking off the suede parts of the seat with safe release tape and avoid those areas.

[@Z32orDIe]

no before n after side by side pic at the end????

[@alanwarner7057]

I used, under car rubberized coating, lasts longer and has a cool texture.

[@aidenp5768]

Do these things just give a look or does it actually fix the problem, there’s a difference between looking and actually being back to how it should

[@sincitydude7296]

I have a 96 Jeep Grand Cherokee with lots of plastic trim around it. It's all dark grey but can I use the black to change the color or will the grey show through?

[@MrTheHillfolk]

m medrano If it's anything like the griots product that I've used forever (but they changed the formula) it'll last a long time(years) i had badly faded trim and I did it 2x for good coverage. This stuff looks better and richer than the griots stuff

[@BryanInPHX]

Is this product the same or as good as the discontinued Showroom New Grey Trim Dye? Also do you have a Plastic Conditioner similar to the Showroom New Conditioner?

[@DetailKing]

+BryanInPHX Yes it works the same it's just a little bit thicker but works just as good! As for a conditioner we'd recommend our Revival which you can check out here: store.detailking.com/best-trim-restorer-for-cars

[@PeteyMcSavage]

How often can one use it in there hair?

[@flexer83]

I use dex 3 transmission oil.

[@jramos725]

Interesting, do you really use ..... does it work ?

[@illus1ve]

Have you tried a heat gun instead? It should surface the oils in the plastic - and bring back the original luster.

[@Sargeizm126]

I thought I was watching a video of a tried and true trim restorer, until he said “our” lol

[@thespacepainter]

Yeah I thought the same. I'm out! Talking way to much shit.

[@amodio79]

Would you recommend this for jeep fenders and bumpers or is there another product?

[@akaredcrossbow]

Try a heat gun first! Chris Fox has a video on it!!

[@paulmorton5423]

Thanks for the video. Couldn't help but notice the ignorant comments.... listen to the electronic courage that would never be said in person !

[@DetailKing]

Thank you Paul!

[@paulmorton5423]

No problem. I just recently bought a plastic and trim spray that's made by Duplicolor. It's like a spray paint. I've already painted some bumper trim with it. I'll let you know how it holds up.

[@shontellelang1198]

Paul Morton How did it hold up? I am wondering as I need to do my car. Thanks.

[@paulmorton5423]

Shontellè Lang it's holding up great. The paint also has a U V protectant in it.

[@davidrickard1012]

Whatever Paul

[@texver18]

where i can buy?

[@ManuelPerez-wh2tr]

go ahead bro

[@urbanedgeautodetailing]

dressing plastic is a thing of the past, polishing is where its at. looks better and last much longer. like anything, longevity of the polish is is determined on owners wash/detail schedule.

[@JosephQPublic]

He dyed it and then dressed it... how can you polish a very rough service anyhow?

[@minerblue9641]

What a salesman! I don't like commercials.

[@stevenm.2597]

How do you get the Trim Coat off the door lock ?

[@Vincenzo10997]

Never knew under the sun was so cloudy.

[@bskdopeboy]

E S P E C I A L L Y

[@CrimsonDad813]

I actually just plasti dip all my old trim pieces and it lasts pretty long too.

[@chrisallison866]

What is the name brand of the product

[@ThoughtWellness]

Black shoe polish, Pam pan spray, coconut oil - those are all the best products for this

[@RichM0410]

stupid question sorry..... I found this video searching for a way to remove wax from the trip like a plastic bumper. does the instructions and products work to remove the wax? does the wax even need to be removed and this covers it perfectly? if recommended removing wax first and if so, your opinion on HOW to remove wax? I see many suggestions like peanut butter or an eraser. thank you!

[@DetailKing]

Not sure if its wax or more of a clear coat on the plastic, if its just wax the rubbing alcohol should help remove anything on the plastic!

[@RichM0410]

+Detail King ok great. specifically what are the products on your website? a part number or whatever to make it easy to find ? thank u

[@Innah026]

i had the same prob before in my bumper..since the plastic bumper has tiny holes the wax penetrate inside the tiny holes..what i did is that i used a soft bristle(or medium bristle not the hard ones it could leave some small scratches) toothbrush and brushed the area with water and car shampoo mixture..just be patient cause you may need at least 2-3 repetitions to get rid the wax..hope this would help

[@RichM0410]

Innah 21 thank you. Mine is just wax that I accidently got on the plastic while waxing the car. what a pain! LOL

[@deoxideo]

Rich Moore you may want to look for a chemical called "final wipe". Auto body shops use the product before paint, specifically to remove waxes and grease before paint. It is now my favourite chemical for that purpose. Doesn't dry as fast as alcohol, and removes various chemical base products

[@jesusalvarez1586]

What the name of both of the product you use??

[@arcorob]

Thank you for the video. Its pretty sad when people have to knock something like this..so on the serious side, a question. I have a Mustang GT California Special which has black valences on the back and front as part of the lower bumper. They have faded and I am tired of GLOSSY 1 week shines. Will this restore their look ? I am not looking for GLOSS...I am looking for uniform fresh look ...thanks again

[@DetailKing]

I would recommend our Trim Kote & Revival kit. The Revival Bumper & Trim Dressing is great for restoring the faded look back to it's original look. store.detailking.com/car-trim-restorer-with-dressing

[@BobbyB910]

So it takes at least three coats for you to cover a door handle....so a bumper would take the bottle?

[@Scampergirl]

I would love to know how to fix the outside door bumper guards on my white car. The thin white vertical strips on the door are now rust colored...

[@Jakadams83]

How many times is he gonna say “just a little more”

[@qnking2066]

Does it also work on smooth finish plastic or does it have too be the slightly rougher surface style?

[@DetailKing]

+Qn King it works best on rougher surfaces. As long as its not a rubber type of surface you should be able to apply it on.

[@ElPresidenteBuzzard]

Is it just me or does the "Trim Revival" just cover the fact that the black stuff fades as it dries?

[@salami99]

exactly, you need to degrease it hard

[@PlatinumTX]

I have a 2009 MDX that came with the Factory Gray trim on the front/back bumpers, I want to change the gray which is original gray it was Never black to actual Black color. Will this product work? Change gray plastic to Black?

[@DetailKing]

+PlatinumTX Yes you can definitely cover the grey with a black dye.

[@VideoMenu]

+PlatinumTX - You saved me from having to ask. The Ford Transit Connect XLT (what I have) comes with a charcoal gray trim, which automatically sets it up to look faded even when it's not. My vehicle is silver, but people with the black FTCs don't get that sleek black look because the trim is off color.

[@frankybrown9273]

If you want to do this then take a heat gun and heat the plastic up a little bit and then it will have the factory new black it's all free and fast way easier to do and doesnt require any elbow grease

[@peterpanassow7814]

I've seen that tip. Works great. 👍

[@rockingarchangel]

303 protectant!

[@aaronfuksa2047]

Josh Russell I leaned 303 had a effect for 6 months or less. A proper synthetic wax can last a year. And a uv ceramic coating can last from 2 to 4 years based on how its made.

[@franzmeinolframakutla9560]

was cleaning my engine with a degreaser it was too strong it left whitish stains on the radiator cover also black plastic how can i remove or with what??