Restoring Destroyed BMW X5M Competition / Frame Problems?

➢ Instagram
@SalvageMasterV
➢Contact me for any business:
[e-mail]
➢If you wish to support the channel:
www.paypal.me/...

[@petervw56]

Look at Arthur Tussik, he’s using a self levelling laser level almost all the time when taking measurements.

[@sttm1283]

not to disrespect salvagemasterv or anything, but tussik got like 40+ yrs of experience with collision damages. he would probably do okay just by eyeballing it :D

[@SalvageMasterEssex]

Laser level is fine provided you level frame machine and undamaged identical reference points on car (on left and right sides) before trying to level damaged area of frame or body. Unless car is standing level left to right any level (laser or spirit) is useless for use on a car.

[@abimaheldelpilarcordova5500]

Your work is coming through all the problems you have encountered and soon that BMW will be finished 👍🏼

[@reaxrte]

finally new episode... oh don't worry they will come you don't need those yet. Your favorite part is about to come after welding rear section ...... sanding sanding and sanding, i guess we will have to stick with 3-4 episodes of sanding XD

[@jamesterrill1938]

I am proud to have the opportunity to watch these videos. Great work...Thanks

[@sonnyblazer5504]

Best thing you have is YOUR Positive ATTITUDE! That will make you a success no matter what you do (plus, you're pretty smart anyway!) Glad for this small ALUMINUM job cuz you will have plenty more going forward. Nice job on another TOUGH one (but you did it!!!) Thank you for sharing!

[@guillermopalmieri9105]

Está quedando hermoso. Muy buen trabajo. Saludos desde Argentina.

[@MarioJurjevic]

Bravo prijatelju. Good job, like allways. Pozdrav iz Croatia

[@smplyizzy]

You need to level your frame rack and then mark the floor where it’s sits!

[@dabrutskiy]

spool gun is the only way to keep it from getting to hot. set up the gun correctly and CLEAN the metal. also 100% argon. its super easy. if I was closer id teach you.

[@dredd-79]

Круть 😎👍🔥Вэл, супер результат!!! Жду следующего выпуска!👌🙂

[@Mihai_Ciulei]

50 usd laser level will help you allot, you can measure the difference... To weld al you need a ac tig, dc tig is not ok for aluminium.

[@pepitodelospalotes4482]

Esta quedando muy bien y rápido 👏👏

[@christopherhallock9344]

Wanted to get your opinion on that Volcan welder before I buy. Does it seem to do everything well and quality made?

[@MrNwapp]

A lot of work, but great progress, Val!👍

[@robertbonesio5498]

Dam!!!!!!! Great Job!!!!!!!!! Keep up the great work!!!!!!!

[@martinhristov2045]

i was waiting for this, thank you❤

[@autovagauto6329]

Amazing progress

[@Sebastian-Pereiro.]

шикарно, продолжай дальше👍

[@alan-tl5dv]

From Brazil thank you.

[@WaemYt]

damn this car was too far gone, atleast its good content.

[@canheapravind5052]

Another great work bro keep it up dr

[@JuanCarlos-wf7et]

Hola saludos desde CDMX de 🇲🇽👍 buen trabajo 👍

[@mydeko1224]

Dobra robota 👍👍👍

[@Jason198353]

Dude you are awesome

[@mariachaldopi9577]

Keep going man❤

[@droca1984]

You should shim the frame rack so it's perfect

[@fredericvaneyll2281]

Ready for painting 👍👍👍👍👏👏👏

[@SalvageMasterV]

Very soon!

[@luisrosas9081]

Saludos Tepic Nayarit México

[@martingajdos9115]

Fantastic 👍

[@marc5460]

tnx for the video

[@formulatransport9475]

I need your help locating a piece of the main harness for a x5m. Is theres a way you can get in touch with me. Thanks in advance

[@fulltimber]

Take some advice from a professional welder. If the weld doesn't look great , the penetration is DEFINITELY NOT there

[@BrucePierson]

It's really hard to weld aluminium.

[@matthewmullane5425]

Did you swap the shell?

[@SootyDiesel81]

Is your welder AC/DC

[@maxpetrov4034]

Не забудь снять жабры со старых крыльев! Они на х5м отличаются от тех которые на стандартных крыльях.

[@rekineke3692]

You know that when you measure the level with an ordinary spirit level, you always measure twice on both side of it because the water eye may be shifted in spirit level device? Use the cheapest rotating laser level, then you will have no problem with the measurement, and if you mount it on a tripod, you will be able to measure practically everything on this car.

[@SalvageMasterEssex]

Unless the car is standing level side to side the level (laser or spirit) is useless.

[@nochanel.]

👍

[@deylichmorales4126]

That a loot of work 👌 keep it going good work

[@laszlogaspar1244]

Looks new

[@laszlogaspar1244]

What’s my prize ?

[@Werik..]

🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🙋🏻

[@joserios6167]

👍🏼

[@whodat7366]

Keeping the beats chunky @salvage master v 😎

[@brettandersen7547]

It's looking good looks like a car now

[@djmikkeee]

Finish the X6😂 your wife will be happy then👍

[@andrewbarnett4621]

💯💯💯💯💯💯

[@iFeelsify]

I see too much gap between front sides

[@mike69papa]

What if you had a lazer?? is it expensive??

[@SalvageMasterV]

My floors in garage is not level

[@SalvageMasterEssex]

@@SalvageMasterV Just jack up frame machine so it's level side to side then Laser level will be OK.

[@rebus64]

3Д лазер тебе в помощь, уровень это прошлый век. тем более что помещение позволяет...

[@SalvageMasterV]

Да ну лазер тоже бесполезен когда у тебя полы не ровные.

[@rebus64]

@@SalvageMasterV ошибка коллега, строительный лазер сам всегда в уровне, у меня тоже полы бетон кривые да и у всех так, у тебя помещение позволяет поставить стойку для лазера и с ним ты еще легко центр будешь видеть а это точность в работеи экономия времени

[@SalvageMasterV]

Я согласен но когда у тебя перепад в 4 инча слева направо лазер никакой Не поможет потому что он сам Восстанавливается в уровень а рама стоит на битоне с уклоном 2инчя

[@rebus64]

@@SalvageMasterV ладно спорить нет смысла, но выставить раму стапеля в уровень на любом полу делов на пол часа у неё ведь есть опоры? по тому же лазеру изначально выставлять раму дальше тебе становятся доступны все размеры и иэмерения потрать один час, посмотри каналы андрея бищенкова он плотно работает с лазером и размерами кузовщина любит точность а пузырьковый уровень неточен.

[@stephenwalsh8184]

👍🚘

[@HowToSaveMoneyOnCarRepairs]

#HowToSaveMoneyOnCarRepairs I have the same problem but mine is older car. so i will just do it the easy way and move the Fender (10mm Forward) this will Solve The Problem.

[@brianratliff3845]

Got my argon gas from tractor supply they sale the bottles

[@alan-tl5dv]

Friend chassis stell and aluminum

[@Andi-gh9dy]

I’m looking your shows for a long Time and I’m impressed of your performance and work you do👍 But I never would give thous cars that you repaired your wife or Familie to drive it but a crashed car is a crashed car, that be never be the same as new sorry is my impression of that !

[@slowery43]

no one asked you maybe let the experts make their own decisions

[@SalvageMasterEssex]

@Andi 🤣🤣🤣

[@mauroandreolli9258]

Troppa pubblicità 👎

[@ivanvokali6900]

Back bimer bambelbee x 6 Bimerr

[@АльфаЦентавр]

Крутой результат, надеюсь жена долго ездить будет. А что со старым х6?