Just finished my install on my Tacoma I wish this video came out earlier. Love my D2s 5.0s!!
@RetrofitSource4 жыл бұрын
I'm glad you love them! Those things are insane.
@Koalateatimes3 жыл бұрын
I will need to figure out the process for ym 14 Focus ST, but I am sure it can be very similar in most aspects. Great video guys.
@RetrofitSource2 жыл бұрын
If you need any help reach out to our customer support team! 404-220-7940 support@theretrofitsource.com
@hendrixfan7274 жыл бұрын
Great video as always guys! But...I need one of those OG TRS vinyls y’all got on the oven 🤙🏼😃
@RetrofitSource4 жыл бұрын
Give us a call we might be able to hook you up!
@brenangreene76103 жыл бұрын
How does someone not like this?? lol
@RetrofitSource3 жыл бұрын
You would be surprised lol.
@fidelsalinas48673 жыл бұрын
Solid video!
@RetrofitSource3 жыл бұрын
Thank you!!!
@xavior7182 жыл бұрын
NOW that’s Great instructional video.
@RetrofitSource2 жыл бұрын
Glad it was helpful!
@patriotsleepercell40606 ай бұрын
You dont need jb weld just purchase another lockring 2 will hold.
@gustavosessa43753 жыл бұрын
Very good mate!!
@RetrofitSource2 жыл бұрын
Thanks a lot!
@Rumeel127084 жыл бұрын
Great detailed video!!!!
@RetrofitSource4 жыл бұрын
Thank you! We put a lot of time and effort into this one, I'm glad you liked it.
@O1Birddog Жыл бұрын
Great, I love it, but I don't won't to do it myself. I've got an 09 Tacoma. I'll try the Headlight Junkies, but I would like to buy the whole thing already done. Thannks
@RetrofitSource Жыл бұрын
Headlight Junkies would be a good place to start!
@SkyHolder965 ай бұрын
Do one for a 10th gen f150
@javedakhtarup79ansari154 жыл бұрын
Very good..Nice fiting and nice video...
@RetrofitSource4 жыл бұрын
Thank you!!
@javedakhtarup79ansari154 жыл бұрын
@@RetrofitSource yuor welcome
@charliegc6315 Жыл бұрын
Impressive ❤❤
@RetrofitSource Жыл бұрын
Thank you!!
@AnipSaturday5 ай бұрын
Nice
@RetrofitSource5 ай бұрын
Thanks!
@chrisbeckner21033 жыл бұрын
I would say 90% solid install vid. But please give this guy a script to read. I lost count of the number of times he says “now’’ after 1237. Also do not skip parts where you make the actual cuts. Would like to have seen you start the retrofit using the factory removed headlights. What you stated with was not the same factory headlights.
@RetrofitSource3 жыл бұрын
Appreciate the feedback, thank you.
@Minwary2 жыл бұрын
Take a drink 🥃 every time he says “now”. You’ll die of alcohol poisoning.
@inspectorgadget65108 ай бұрын
Very close to what I’m looking for. Do yall have a video of a hid retrofit on a 2011 Tundra? I guess they Tacoma and Tundra would be wired differently? Since my 2011 Tundra isn’t bi xenon.
@RetrofitSource8 ай бұрын
We don't, but maybe we can make one in the future!
@handymanso33222 жыл бұрын
Do you guys offer these services if I need them? I prefer to have someone that knows what they're doing. before i mess anything up
@RetrofitSource2 жыл бұрын
We don't, check the page Headlight Junkies on Facebook, there are tons of reliable builders in there! (:
@PedroPerez-ql6wi11 ай бұрын
Hell yea 🔥
@bobtaiy29103 жыл бұрын
Thank you very much ❣️🥰
@RetrofitSource3 жыл бұрын
Anytime my man, let us know if there is anything else we can do for you!
@loganito1008 Жыл бұрын
gonna need help with my 2002 4runner.
@RetrofitSource Жыл бұрын
Give us a call! 404-220-7940
@jackedburton76394 жыл бұрын
Just ordered a pair of D2S's and 5800k 50wt bulb from you guys last week to retrofit my 2005 Tacoma. Perfect timing! What brand housing was that you guys are using?!? I bought one that looked EXACTLY like it and was Spec D brand. The G DAMN thing was sealed with permaseal and I demolished them. Wound up salvaging the clear reflectors and clear turnsignal lens. Please for the love of all that is good and holy link to where to get those headlight assemblies that look like that but are sealed with butyl?
@RetrofitSource4 жыл бұрын
It's meant to be! Thank you for watching.
@joeytasha70804 жыл бұрын
The retrofit source yall need to do one on the 97-03 f150
@RetrofitSource4 жыл бұрын
We'll see what we can do!
@jareklotzАй бұрын
Any plans for a European Toyota Hilux model ???
@RetrofitSourceАй бұрын
You can retrofit any headlight, even the Hilux!
@jasonnehceis32672 жыл бұрын
I want to get the ACME universal Retrofit kit for my 04 Tacoma, but the info mentions a recommended "optional precision bulb holder" yet nowhere in the selections menus does it have for me to select it for order.
@RetrofitSource2 жыл бұрын
This is the Morimoto Motoholder!
@Jordan_harris721 Жыл бұрын
where do you get the black headlight unit for it? I liked the dark look and want to get rid of my oe reflective unit
@RetrofitSource Жыл бұрын
It is painted.
@JRSLASH3 жыл бұрын
who manufactures or sells these headlight housings with the grey reflector? are they the Lumen brand from CarID? or could you post a link to where they're from
@RetrofitSource3 жыл бұрын
There are many different manufactures but the was a custom job.
@bikerdave191482 жыл бұрын
You already have a trim tool that you call a " spreader" the actual reason for the tool is to remove clips
@RetrofitSource2 жыл бұрын
Nice!
@vikingdaniel12333 жыл бұрын
Does a 2015 Tacoma need the hi/lo beam connection or does it have the h4 style connection?
@RetrofitSource2 жыл бұрын
This one had H4!
@UnitedLoyalist Жыл бұрын
Can I ship my housings for my T1 Volkswagen Touareg to you for this to be done for me. I don't like tempering with lights in general and do not know of, or have anyone in Namibia who can do this
@RetrofitSource Жыл бұрын
We don't build in house. Check out the page Headlight Junkies on Facebook to find a builder near you!
@SVTJayJay4 жыл бұрын
I want a D2s 5.0 shirt 😬
@RetrofitSource4 жыл бұрын
We have them!
@ThatGuy173714 жыл бұрын
By taking the reflector bowl out and placing it on a bench ~25' from the wall, why wouldn't it be more beneficial to leave the reflector in the housing? Do y'all use a jig to place the reflector bowl in to align it perfectly? I'm installing 4.0 d2s in the same headlights, will the alignment washer set the projector level regardless? Thanks in advance! I'm very excited to complete my install!
@RetrofitSource4 жыл бұрын
We left the reflector out of the headlight incase the reflector needed to be trimmed more when aligning the beam pattern up with the factory beam pattern. We don't have a jig, but we used tap to mark where the headlight/reflector is sitting to ensure that it's in same spot as before. That can be seen in this video: kzbin.info/www/bejne/gIOkaGttaqprjbs The alignment washer will set the horizontal level, but may still require some tweaking. You'll also need to trim the back of the reflector as well so that the nut will thread to the threads. Good luck with your retrofit, we'd love to see it when it's completed!
@t.jaguar2 жыл бұрын
Can you built a set for me? (Mazda cx7 2010 headlight)
@RetrofitSource2 жыл бұрын
Unfortunately, we don't build anything in house, we can put you in touch with one of our recommended builders though!
@JacesOwnWorld Жыл бұрын
Everything in this tutorial was so clean until he got to the OEM plugs, ground bolt(s), and battery positive terminals LOL
@RetrofitSource Жыл бұрын
Leave it to the OEM stuff to make it difficult 😪
@diversify2104 жыл бұрын
So these things arent street legal? I want to do this 13 taco, but Im not trying to be getting pulled over for headlights, especially living here in California where everything already ridiculously expensive. I dont want any tickets added to the list of things I have to pay
@RetrofitSource4 жыл бұрын
They are unfortunately not street legal, I wish they were! What I can tell you is that in an off-road application, these lights will produce a totally safe and usable beam out front!
@diversify2104 жыл бұрын
@@RetrofitSource Well I understand that you guys from TRS cant say it, but Im sure most people are doing these retrofits for vehicles driven in the streets. Id like to know from anyone that has done this retrofit. What are the chances of actually being pulled over for it or is it really something that as long as the headlights are properly aimed and not glaring the shit out of people cops wont be able to tell the difference.
@RetrofitSource4 жыл бұрын
Those projectors should produce a safe and accurate beam pattern, and shouldn't bring any extra attention, other than positive, to your headlights!
@Snicker605153 жыл бұрын
Technically these setups are highly illegal, but you're not gonna be "that guy" with the PNP HID kit or jumping forward to present day with the replacement LEDs that's blinding everyone on the road at night. With lenses in good condition and the the headlights aimed properly, you shouldn't be causing anyone any grief at night.
@Keegsbruh4132 жыл бұрын
Why do you guys called panel clip pliers "seal splitters"?
@RetrofitSource2 жыл бұрын
Because that's what we use them for 🙂
@timfrancis67744 жыл бұрын
what about a 13 tacoma? need to do this soon
@RetrofitSource4 жыл бұрын
It'll be a similar process. We are always here to help if you need anything.
@MrWorldWide8064 жыл бұрын
99% similar process
@nexgenjtf98893 жыл бұрын
Can u make for 04 mercedes s500
@RetrofitSource2 жыл бұрын
Maybe some day!
@oda01113 жыл бұрын
Holy shit this guy looks so uncomfortable! Great video but have some mercy on him next time and give him some anti anxiety meds.
@RetrofitSource3 жыл бұрын
Thanks for the input my man!😂
@sydneyann201013 жыл бұрын
Looks like me when I'm taking a shit without my phone 😂😂😂
@GhostshooterGames2 жыл бұрын
You have headlights for tundra 2022 sr5 ?
@RetrofitSource2 жыл бұрын
Not that we custom build like these but we do have these! www.theretrofitsource.com/toyota-tundra-xb-led-heads-B-TUNDR?quantity=1
@marcoaurelioamaralfernande8942 Жыл бұрын
Do you have for Toyota limite 2002? Peixe?
@RetrofitSource Жыл бұрын
We do not, sorry!
@Ph4tT0ny2 жыл бұрын
You didn't explain how to align and aim the beam at all.
@RetrofitSource2 жыл бұрын
We have other videos on this whole process, check those out!
@JohnDoe-ig9ev4 жыл бұрын
After all that... No fkn before an after goddamit screenshots it is i reckon
@RetrofitSource4 жыл бұрын
Sadly not. We do have the before footage at the beginning,and the after footage at the end though!
@brandonsheaffer5035 Жыл бұрын
Made the mistake of watching the whole video before looking at the price of this kit and finding out I can’t afford it. Now I’m sad 🙄
@RetrofitSource Жыл бұрын
We have some amazing sales during summer and Black Friday! 👏🏼
@drewhostetler87312 жыл бұрын
You could have shortened this video by 20 minutes if you left out all the shit we learned in kindergarten.
@RetrofitSource2 жыл бұрын
Schools in session 🤓
@Demosthenes4092 жыл бұрын
Too bad you guys dont offer the actual installation service
@RetrofitSource2 жыл бұрын
Honestly, we wouldn't be able to keep up with that amount of work 😅