Ford Mondeo Mk 3 Headlamp Removal 2001 - 2007 Side Light, Indicator, Headlight Bulb

[@shirleythomasson5993]

A very well explained video by this man who actually knows what he is talking about.

[@jeremytremellen8257]

I’m so glad you put this one up. Thank you. Great job. Saved me a lot of time.

[@retrorestore]

Glad it helped!

[@shanepatrick641]

Thank you for no nonsense tutorial. Cracking video!

[@emilydedlock251]

I've literally just changed my side bulb after seeing this...Halfords charge 9 euros to fit a bulb . So you saved me money... and that was a great tip about using WD40 on the rusty pins. Came out so easy afterwards. Thank you! You wonderful chap you!

[@retrorestore]

Glad it helped

[@newangelpark4551]

Very helpful thank you ! I wasn't looking to fix any bulbs but just remove the headlamp assembly on driver's side to get a better look at a suspected leak in a pipe that's splashing fuel about. Near the EGR valve.

[@kevindonald8625]

Great stuff thank you very much for sharing.

[@VulcanDriver1]

Excellent video. I had to change my O/S headlight unit as the plastic lens had "fogged" up and it was a borderline MOT failure. As a non-mechanic I completed the job in about 6 mins following this video 👍

[@retrorestore]

Glad it helped

[@willem3602]

Thanks👍👍

[@retrorestore]

Welcome 👍

[@jakehamilton9352]

So glad I found this video! Didn't know where to start with replacing a bulb on my Mondeo at first glance. Watched this video and new bulb was fitted and working in about 10 minutes. It's nice when someone who knows what they're doing goes to the trouble of passing that info on to help others. Thanks mate.

[@retrorestore]

+Jake Hamilton Hey, nice one Jake. Glad it helped sort out your problem. Cheers Martin

[@petefroud5308]

The good old 501 bulb pretty much does most number plate lamps as well. Nice video Martin. Nice and clear . Cheers Pete.

[@retrorestore]

Yes, it's a common lamp as you said Pete. Cheers Martin

[@petefroud5308]

If I had a quid for everyone of them I sold or fitted. I would be a rich man lol.

[@retrorestore]

I just hope this vid saves people money. Cheers Martin

[@petefroud5308]

retrorestore Sure it will Martin. The name of the game.

[@chrisford6151]

Good one! Just what I had to replace. Took nearer 10 minutes for me & I wasn't doing a running commentary. Probably would've taken me half a day without your helpful video! Thanks

[@retrorestore]

Nice one Chris, Yes, it does take longer because of the filming lol. Cheers Martin

[@mikeclark3030]

Thank you! followed your clear instructions and had both sides done in no times. Just in time for MOT.

[@retrorestore]

+Mike Clark Nice one Mike. Well done. Cheers Martin

[@davidm.4063]

I just did it in less than 10 minutes , great video .... saved me alot of time and headaches !!

[@retrorestore]

+Damo Moda Hey, great job and thanks for the feedback. Cheers Martin

[@The_Highlander]

Best clip I've seen on this issue as several useful tips are given on removal/refitting of each part involved. Well Done! :))

[@retrorestore]

Thanks Brian, glad it helped

[@robertbennett8254]

excellent and easy to follow ta for upload

[@retrorestore]

Thanks bud. Cheers Martin

[@latitudeash]

You made that look easy. Helfords would have charged £5 to do the same thing. Good job, thanks for showing.

[@retrorestore]

Cheers bug. Thanks for watching. Martin

[@Morrisondudeanddudette]

Brilliant dude

[@retrorestore]

Cheers bud.

[@GTsGarage]

Nicely done, liking the new format and looking forward to more of these instructables.

[@retrorestore]

Cheers bud. Thanks for watching Cheers Martin

[@danielblackburn2453]

Thanks for this video mate, I've been putting off changing my bulbs cos i opened the bonnet, had a look, then closed it again lol. Thanks, off to the shop for bulbs :D

[@retrorestore]

Glad the vid helped. Cheers Martin

[@cwuzii]

Nice new format for the tutorials, looking great. I was waiting for a new 2015 video from you so I could see if you forgot to change the Roman numbers at the end, but you did change them to 2015, nicely done :) I was in Halfords getting bulbs yesterday too, need to replace the headlight bulbs on a MK1 Focus, meant to bit a bit of a blag to do but we'll see. Have you got a Halfords trade card? Very useful, the 2 headlight bulbs were H7 55W and were £14.99, but with the card they were £8.50, not bad eh.

[@retrorestore]

My Son in law has a discount card as he is in the RAF and he can get very good discount but that's a great discount you got there. This format is just for short tutorial vids so the other vids will be the same. Well spotted on the Roman numerals lol. Cheers Martin

[@mrman17]

I get trade at a small local motor factors, and at EuroCarParts. I will look in to getting a trade card at Halfords one day (they do have info on their site on how to obtain a card). It's surprising how much it can save you. You may even be able to get some places like ECP to deliver to you within a couple of hours. I had been buying certain bulbs in bulk, 10 or more at a time, from suppliers on eBay, which worked out quite cheap, but they're not necessarily the best quality.

[@retrorestore]

mrman17 There's always a deal to be had if you are prepared to shop. Most people who pay Halfords retail price are not really in the trade me thinks.

[@mrman17]

No, Halfords are mainly geared towards the end user. However, I still sometimes use them for the occasional tool (some of their tools are not bad), cleaning stuff, or if I need something at 7pm or on a Sunday, when other places are closed. So while they're not usually my first choice, it can be handy.

[@cwuzii]

mrman17 I only think Halfords is worth using if the trade card can be used, it covers tools too btw, which is nice. The card only took 2 minutes to get when I went in, worth doing if you can :) How do you obtain the Euro Cap Parts trade card? I'm guessing it's not as easy to get as Halfords' one is.

[@brianpercival1829]

A new Intro! Nice. Easy 5 minute job. I wish working on cars was that easy on every job. So, why is it bulbs always blow in January when it is -10c. Frozen fingers, and Martin, no coat? it is January ya know, not May. Wheres Barney, and Gary should be standing behind you with a beer. Keep on keeping on... Brian

[@retrorestore]

It was actually very mild out today Bri, Gary was at work and I had this little job to do since November lol. Cheers Martin

[@Nesgamer1991]

Hello mate. How is the dipping business coming along? I have been looking to get some vespa sidepanel dipped with a captain scarlet graphic.

[@retrorestore]

Not done anything as I wasn't well. Will be moving on with it very soon. Cheers Martin

[@mrman17]

This is actually a good idea by Ford (for a change ;) ). Makes life a lot easier. A friend had an older Renault Megane and to change any of the bulbs on the front, you had to jack it up, remove the wheel and get at the back of the light cluster through a small access hole in the plastic covering, even then, you can't see what you're doing and it's done by feel. A complete pain to do.

[@retrorestore]

Yes, I thought this was a good idea as well Mrman. Makes a change for something on a modern car to be simple. Cheers Martin

[@shawnmrfixitlee6478]

Great vid Martin ..Wonder what model that would be here in the US ??

[@retrorestore]

I don't think you had this exact model over there Shawn. The nearest was the Ford Contour that went up to 2000 in production. In Tiawan it was called the Ford Metrostar. Cheers Martin

[@shawnmrfixitlee6478]

Thanks Martin !!

[@markbowles8847]

Hi Martin. Brilliant video and well explained. New to your channel and have watched and liked most of your videos !! Keep up the good work. May have some questions for you about my mk3 mondeo if ok :)

[@retrorestore]

+Mark Bowles Hi Mark, Glad you are enjoying the vids No probs, Cheers Martin

[@markbowles8847]

+retrorestore thanks martin. Where can i post any questions i may have ? On this thread ? Been watching your vlogs too. Love the one with you trying to get the fly in the kitchen :). Top bloke :)

[@markbowles8847]

+Mark Bowles one problem i have with my mk3 mondeo is the heaters. As much as i turn the knob the heat is stuck to blowing at the windscreen and doesnt come out of the vents. Just wondering how simple the fix is and if its possible to do a video so i can resolve this. Cheers Martin

[@retrorestore]

+Mark Bowles I've not done that job yet as ours is fine. I film them as jobs come up Mark. Cheers Martin

[@markbowles8847]

+retrorestore ok no worrys thanks Martin

[@MrBaggers75]

Great video. Cheers mate. Have you got one for the rear light clusters at all on the same car?

[@mrdoofa9357]

Tom Bagley The rear lights are very easy, remove 2 half turn plastic bolts on each side to remove the trim then you’ll see the plastic assembly that holds the rear lights. Squeeze the 2 red tabs and pull the assembly out, you then have easy access to the bulbs. Once done reassembly is the reverse of the disassembly!!! Happy days!!!

[@mrdoofa9357]

Why can’t all car bulbs be this simple to replace? Some cars need wheels removing, bumpers removing, engine parts removing. Great idea by Ford.

[@pinkpanther65444]

hi just wondering I bought a mondeo mk3 for parts and it has xeon headlamps but the blockconector does not match my car way can I do???

[@retrorestore]

+john jjohn You'd have to change the connectors I think. Cheers Martin

[@jakepearce4025]

I come from a race car background as a hobby I race and build my own autograss car, I am only 14 so my dad contributes by providing some help. I have thought about starting to make money but I'm too young for a job I wanted to start restoring lawnmowers like you do could you give me some advice on how to get started, where to find lawnmowers, parts and paint. I hope to receive some feedback many thanks, Jake!

[@retrorestore]

Hi Jake, put an advert on gumtree, preloved and facebook saying" old petrol lawnmowers wanted non runners. Cash waiting" and also check out facebook groups for items for sale around where you live. Check my lawnmower vids for tips and tricks and give it a go. there will be plenty of mowers out there that won't start before the growing season starts. I prefer Briggs and Stratton powered mowers. cheers martin

[@jakepearce4025]

Thanks Martin for your response I will take your advice from both your videos and the information above and get straight to it advertising! I'll keep you posted on my success. Many thanks!

[@spanermantim]

Easy peasy lemon squeezy.

[@retrorestore]

Poet Tim in the house. Cheers Martin