Reuse Damaged Bike To Build An Electric Bike-Cart For My Family

[@АлександрЮрьев-ы8к]

Лучшее наглядное видео !!!!Спасибо огромное автору Добра, Достатка , Счастья !!!!

[@andrewpipitone1572]

I love it it's very usefull to get to the store get groceries and travel back. I see many people buying your bike across the USA. Been riding an ebike for 5 years now. The best way to have a ebike buisness is have your own brand.

[@kokopelli314]

Nice but some tips from a builder.. Put spacer sleeves between bearings. Use hardened shank bolts for any axle. Use dampers for non suspended pivot loads.

[@hayathayat1462]

Bravo Turkey İzmir selâm 👍 🌹

[@fawabros]

Welcome!

[@yasinkeskin1]

i heard that there was a good place, be safe bro

[@maaikw7645]

I love, love this and always want to make or buy it myself. But for the poor and non technical among us: the amount of cargo you can carry on a normal city bike with luggage racks back and front is just as much and even larger than with these kind of add-ons or bike trailers or dedicated cargo bikes. On the back carrier rack you hang large side bags (the kind that are used to deliver newspapers), a large crate on top of the rack and also a large crate on the front carrier rack. (I live in the Netherlands where most traditional bikes have standard carrier racks front and back.) I fasten and secure everything with old inner tubes, which are basically giant elastic bands and you can use them for everything. If I need to carry even more stuff I use a hand truck/trolley as bike trailer and an inner tube as trailer hitch tied to my back carrier. It works. It is amazing how much I can transport with this simple set-up. I even used an inner tube to stabilize my front wheel (preventing the wheel to flip to one side when parked and/or is heavily loaded). Transporting long materials like timber or pipes: I use two inner tubes as loops, one attached to the back rack the other either hanging from the handlebar or over my shoulder like a handbag, then hang the load in the loops.

[@paulgovan3507]

Yes - I also use old inner tubes for outdoor exercise - wrap around street poles - do butterfly-pull upper-arm exercises etc while out jogging/walking/cycling. Use the same ones (different sizes/widths) to secure stuff on rear bike racks. Most EV /ebike/escooter video sites and reviewers seem to hate even talking about the whole subject of luggage and load-carrying. And how often do we have to see idiots ebiking or escooting around with little or big back-packs stupidly weighing on their shoulders and their spines because - hey - racks, baskets, bags etc hanging on or attached to the bike/escooter LOOK SO UN-COOL, right? Paul G

[@stevabuaca6776]

Najzad jedna prakticna i uptrebljiva inovacija!!!

[@fawabros]

Thank you!

[@ПетрПавлофф]

Очень подвижная передняя вилка пару демферов спереди снизу !? Идея огонь ! Молодец ! Спасибо !

[@MrAriano65]

Un gusto ver este nivel de ingeniería aplicada. Siempre lo que vende este señor está bien pensado y ejecutado. Un saludo desde la distancia. Éxitos en su vida👋👍🇨🇱

[@fawabros]

Thank you so much!

[@diyathomevn]

*_congrats you are very perfectionist , your projects are very functional, i like your projects, congrats_*

[@fawabros]

Thank you!

[@LXLX224]

this is exactly what I wanted to build myself, but haven't the skills nor the tools. great job!

[@betofen2315]

Luar biasa.terima kasih.atas inspirasi nya semoga sukses.

[@fawabros]

Thank you so much!

[@jeustaquiolopesdas2334]

Legal meu caro amigo irmão camarada, muito inspirador suas dicas vão ajudar muitas pessoas mundo a fora, Luziânia Brasil.

[@fawabros]

Many thanks for your compliments!

[@ЛёхаСотник-б1щ]

​@@fawabros сделайте руль по ширине колёс, не будет дёргаться при управлении резко.

[@vforvideos105]

Make petant and start production. World is awaiting for such awesome products. Very nice.😊😊😊😊😊

[@VOVK--75]

Дякую за ідею ! Взяв собі ! Багато переглянув проектів і зупинився на твоєму проекті !

[@fawabros]

Welcome!

[@claudyguibert]

tes œuvres sont magnifiques

[@fawabros]

Thank you!

[@darmowidodo9327]

Wow...🤔🤔🤔amazing fuulll... Thank you... 🤝🤝🤝🙏🙏🙏🙏

[@fawabros]

You are welcome!

[@suryapadhee5668]

u r GREAT. God bless you. from ODISA

[@fawabros]

Thank you so much!

[@jaymajor7077]

My friend that's what I need for my bike to because that's a very good idea 💡 well done my friend god bless brother from anther mother god bless

[@joseguillermorochaurquizo5128]

Excelente moodificcacion muy práctica...saludos

[@fawabros]

Thank you!

[@gerasimovmatvey]

Тот случай, чем дольше всматриваешься.......

[@pavelarbakov5532]

Красавчик! Пару идей подсмотрел на будущее,спасибо.

[@fawabros]

Thank you so much!

[@RomsFabrication]

This is a perfect tutorial sir.. Thank you for sharing 👍👍👍

[@fawabros]

You’re welcome!

[@MrBlack.]

I love the magic of fast-forward and 'Q' type finger snapping magic editing skills.

[@fawabros]

Many thanks for your suggestions!

[@glorybackhk]

you are talent, I want to copy one.

[@fawabros]

You should make one.

[@ulhassawant7700]

Salute for ur brave mind.

[@goldonon]

An ingenious product. You have to defend the idea and sell it You and we will all benefit.

[@fawabros]

Do you want to buy drawing?

[@goldonon]

Thanks I really appreciate your work. I also do drawing for a living

[@gideonlapidus8996]

Absolutely Brilliant Build

[@fawabros]

Thanks!

[@giuseppetambuzzo5271]

L'idea è stupenda il lavoro anche , anche come qualcun'altro scrive ci sarebbero alcune cosine da rivedere !!

[@joellarussell6372]

🤯😲 great concept. It's also a theft deterant with the front wheels being a removable shopping cart.

[@flavioandrade7051]

Irmão você ganhou mais um inscrito, deixei o like e este comentário , Deus abençoe você toda sua família em nome do senhor salvador Jesus

[@fawabros]

Thanks!

[@jackdernorsek7986]

This is SO good, I almost can't stand it! Awesome. I have the bike and the wheels! And I can weld. Gonna make one myself.

[@CDSangTao]

Bạn làm xe điện rất tốt thật tuyệt vời

[@fawabros]

Thanks!

[@AVTOCLASS]

Good video !

[@fawabros]

Thanks!

[@AVTOCLASS]

@@fawabros 👍👍👍

[@utubeape]

That is brilliant, and a good product to bring to market, if people just only need to remove a front wheel of their ebike and add on the cart to make a Cargo Trike whenever they need it

[@hardrock8520]

I watched your clip several times, and I couldn't help but find myself being forced to subscribe to your channel. If you gave me more details about connecting the battery, you are amazing. Greetings from Syria.

[@rjlinnovations1516]

Excellent repair and design

[@fawabros]

Thanks for your compliments!

[@michaelhightower8160]

😳 WOW 🤔 This is just the idea I had in mind but with out having the basket hooked on to it!🤨So now you gave me just the right way to go about making a two front wheeler attachment 😉👍.So I can go from two wheels to a three wheeler.😳👏👏👏 Making it your way even takes less metal material and welding to make then all the other KZbin videos I have looked at on here 😉👍.

[@jorgepinoalejandre3939]

Hola, EXCELENTE, eso es CREATIVIDAD.

[@fawabros]

Thank you so much!

[@MarkPrince1317]

You very talented 👏👏👏👏your design is amazing I like it you deserve 5 ⭐⭐⭐⭐⭐

[@fawabros]

Thank you so much!

[@knight91066]

Excellent 👍. I gonna copy this for my 110 cc motor bike. And lets see ♥️♥️

[@fawabros]

Ok bro. Fighting!

[@kazuza9]

You are a genius. Great idea

[@fawabros]

Thank you so much!

[@madanjoshi8696]

The best video Supar Kalakar.

[@fawabros]

Thanks!

[@pedrogonzalez783]

Muy bueno excelente llama la atención y da ganas de comprarlo.

[@fawabros]

Thanks for your compliments!

[@martinromeo1006]

Good job 👏 👍 my friend well 👍 done very nice.

[@fawabros]

Thank you!

[@lorilange8654]

This is so AWESOME thank you for this amazing video what a cool bike now!!!

[@fawabros]

Thank you, too!

[@lorilange8654]

@@fawabros Ye keep up the great work 💙

[@richardribot1441]

hands down you're the man you're a genius😀😀

[@fawabros]

Thanks!

[@Farm_fab]

It looks like a simple design, but the front wheels need fastened on both sides to keep the axle from bending. You need crimp on or solder connections for the batteries, as there's a risk of fire from the twisted together wires. Otherwise it's not bad.

[@fawabros]

Many thanks for your advise!

[@yanleo3434]

100 true

[@ljprep6250]

I would also have fabbed an adjuster for the chain tension, but yeah, not bad.

[@Leafyfpv]

3/8 axels will tend to bend but with the two it should help, something like this using 14mm bmx axles would be more load and abuse bearing.

[@_fernandogarcia_]

@@fawabros You should also add pieces of tube to support the bearing here (6:08).

[@lanpncz]

Tuyệt vởi!! siêu phẩm :D

[@fawabros]

Thanks!

[@stonecookie]

There is hope for humanity, I wonder if it could have an adjustable recumbent seat. But it looks terrific and the design is very inspiring.

[@yasinkeskin1]

Thank you for not adding background music

[@sddiymakeitworthit7512]

Amazing 3 wheeler bike 🚲 awesome 👏 👍

[@fawabros]

Thank you!

[@beckyg4860]

😀Now that is how it's done 👍 the best thing ever created for a bike very well🤔 💭 thought 🤓👍❤️

[@fawabros]

Thank you so much!

[@autolancegega599]

Great Job, wonderfull creativity.

[@fawabros]

Thank you so much!

[@МаксимБурдасов-ф3м]

Хм .. на мой взгляд спорная конструкция ... Но сделано красиво. Молодец!

[@seredaaleksandr7894]

ну да, особенно привод нужно было гибридным делать, сядет в пути аккумулятор и кати его ))

[@fawabros]

Thank you!

[@alextrezvy6889]

@@seredaaleksandr7894 тормозов нет, крыльев нет, оси под изгибающей нагрузкой...

[@restauresempre1285]

Com uma maquina de solda dessa kkkk dá até gosto de trabalhar e inventar as coisas

[@victorsalazar3742]

Muy bonito su juguete excelente lo felicito d💪

[@fawabros]

Thank you so much!

[@ridhadababi5858]

Very good job. Thanks for sharing.

[@fawabros]

You are welcome!

[@Mocking69]

Reverse strike bicycle is good ♪

[@fawabros]

Many thanks for your suggestion. But it’s not easy to built in reverse strike for electric engine and chain.

[@ja-qd9rk]

Hi from Philippines 🤗🤗🤗🤗 👏👏👏

[@fawabros]

Hello and welcome!

[@nizarnabhan7573]

Excellent job well done very good my young man a ride from nothing but with all your knowledge, you should do a show TV to show the world how do the new technology fro the old one.

[@fawabros]

Many thanks for your suggestions!

[@vection3125]

초고수

[@fawabros]

Yes, bro.

[@viktorsolaris52]

UF!!! ES UNA GENIALIDAD, FELICIDADES, ES LO QUE QUIERO HACER, UNICAMENTE LA PARTE DELANTERA PARA OTRO PROYECTO. ME INTERESA MUUUCHO.

[@jocomercccomercc7651]

Excelente trabalho 👏👏👏

[@fawabros]

Thank you!

[@wilsonsantos4190]

Que projeto legal. Gostei muito, parabéns.

[@fawabros]

Thank you so much!

[@beneditopereira6988]

GOSTEI DESTE PROGETO PARAbens

[@mestredivonzir8960]

essa idéia matou a pau parabéns

[@TheManV100]

BEAUTIFUL PROJECT!!!

[@fawabros]

Thank you so much!

[@diebluedieblue]

Thanks for sharing👍👍👍

[@fawabros]

You are welcome!

[@mattDIY]

Cleverest,, good job 😃😀😀

[@fawabros]

Thanks!

[@Leafyfpv]

looks awesome... Props! there is not a shock to re center the leaning? The fact that you kept it easy to remove was great! I need you to come by the garage sometime!

[@naksu2024]

Yeaaaah this is exactly what i need. Great Job!

[@derrickboatman1560]

Very cool project. I would have liked to see some soldering on the wires.

[@waniltonreisdossantos9868]

Parabéns, muito bom, trabalho de mestre. Petrópolis-RJ Brasil.

[@fawabros]

Thank you so much!

[@AirtonRodrigues-u9v]

Muito bom 👍. 🎉👏👏

[@fawabros]

Thanks!

[@marioordenesalvarez1711]

Los felicito por la grandiosa ingenieria que usan y aplican

[@richie8214]

Very good build

[@fawabros]

Thanks!

[@CuongTran-xd7rv]

Excellent idea with simple design!!! Thumps Up.

[@fawabros]

Thank you!

[@jacobomarquez707]

Muy instable tu bicicleta

[@fawabros]

Why do you think like that?

[@johngookinsable]

By far my favorite build yet! 👍

[@fawabros]

Thanks!

[@Superseer2]

OMG I LOVE YOU. THANK YOU TOO MUCH.

[@fawabros]

Thank!

[@fawabros]

Thanks!

[@refugiovite4853]

Q chido c ve eso,q bonito saber arreglar las cosas saludos cordiales sale amigo yo como discapacitado m gustaría tener una así d tres ó cuatro llantas para no caerme...

[@osmankaracic7730]

Praktično i vrlo interesantno.

[@abdelkbirmoradi5403]

Nice work, please can you give us the value of the power of the electric motor

[@fawabros]

48V, 1000W bro.

[@murlee6930]

Wonderful ❤️ bike 🎉🔥❤️ Keep invovating, and God bless you

[@fawabros]

Thank you so much! Keep follow us!

[@Hitycooking]

kzbin.info/www/bejne/Y3XQq5hvp92iis2ods

[@badrinair]

Very good design

[@fawabros]

Thanks!

[@carlosespinosa8836]

de verdad muy buen video , te felicito

[@joaomaglianooliveira1348]

Top .show , parabéns 👏🤝👍🇧🇷🇨🇮💖

[@fawabros]

Thank bro!

[@paulgovan3507]

Please give us some Quick Release large load-carrying solutions for normal/average escooters and ebikes! Perhaps using wing-nuts for instance ? Paul G

[@SonuBaba1993shorts]

Very good videos I like your videos❤

[@AlcatelOne-lt2km]

Parabéns! Show!👏👏🇧🇷🇧🇷 Só me restou uma dúvida.🤔 Vc colocou 04 baterias sendo que ligou 02 + 02 em série fazendo dois blocos de 13,6v e depois os ligou em paralelo, conseguindo 27 volts com o dobro da amperagem. Logo em seguida, vc ligou a entrada do plug ac (110v) direto nas baterias? Vai dar certo na hora de recarregar?

[@ВикторРемез-у1г]

Великолепно!

[@kamrahsumpau9658]

cara cara ternak burong puyoh

[@kamrahsumpau9658]

b Burong puyoh

[@lourdessantos494]

@@ВикторРемез-у1г ir para vender essa bicicleta

[@lourdessantos494]

@@ВикторРемез-у1г é para vender essa bicicleta de com vídeo

[@DFX2KX]

That's neat. I've seen something like this advertised for sale, but never figured someone would make that kind of two-wheeled cart fork on their own.

[@fawabros]

Not for sell, bro.

[@DFX2KX]

@@fawabros I knew you where selling this one. There are a few companies that make cargo bikes with two wheels up front. They don't turn the two front wheels into a hand cart, though, that's pretty unique.

[@miroslawmoczyrog]

@@DFX2KX kzbin.info?search_query=trego

[@christianrivera1848]

Nice Work ✅👈

[@fawabros]

Thanks!

[@jackreacher1963]

Not bad at all. 👍

[@fawabros]

Thanks!

[@princedhyani2370]

Excellently

[@fawabros]

Thank you!

[@робертПетров-с8д]

​@@fawabros💩💩💩💩💩💩💩💩👿👿👿👿👿👿👿💩💩💩💩💩

[@yeagerxp]

Nicely done 👍👍👍Thanks for sharing

[@fawabros]

Welcome!

[@christianpaulroldan4010]

That is genius

[@fawabros]

Thank you!

[@davidsamways]

Very clever and resourceful, but please do something about the wiring! - A bit of solder or even some proper screw connectors would make it more reliable.

[@олегграчев-щ6б]

Передние колеса супер но для пустых коробок стоит заморочится и аккумулятор надо бы приварить а провода припаять а так все супер

[@nelsonc8188]

Excelente iniciativa 👏.

[@fawabros]

Thank you so much!

[@niklogin96]

Параллелограммный мост. Он же только его запросто патентовать может. А в целом - модульный велосипед, отдельное направление.

[@fawabros]

Thank you!

[@pirola8012]

Idéia magnífica ok

[@fawabros]

Thank you so much!