REV9 Turbo Manifold REVIEW! And drifting, of course.

[@lthatskaterguyl4294]

Funny you just posted this, yesterday my gasket went. Same rev 9 manifold. Great vids!

[@dandonovan7328]

Great video!

[@kcdrswitcher9437]

I love yalls hardbody content, keep it up guys!!

[@skiddinhardbody5071]

Nice too see you guyz again💪

[@josephschmier3733]

I just like the hardbody stuff myself

[@nathanialhoppens8489]

Need to see the stickers and hats or link to them thanks guys

[@vabina4]

Hardbody stuff 😁😁

[@davidglover5914]

Hardbody content for sure

[@ka.powered8328]

Look guys, the hardbody scene NEEDS attention,- subies,mustangs etc already have their cults... As much as I would like to support u all with trying different things,my interest at heart is still gonna remain for the D21's❤️👍

[@izzyplusplusplus1004]

I was hoping you had a D21 video up.

[@izzyplusplusplus1004]

KA.Powered make a D21 vid.

[@ka.powered8328]

@@izzyplusplusplus1004 haha,I'm not a youtuber bro..🤷🏻‍♂️

[@izzyplusplusplus1004]

@@ka.powered8328 Neither am I. But I got a D21!

[@kapilaciancio1889]

Can you do the same turbo build on the KA24DE frontier?

[@elyaquigarage5047]

Nice saludos..amigos..desde tijuana mexico..

[@haggardautomotive]

I love the hardbody content. Honestly though anything with a motor.

[@itschrisb]

I come for Hardbody and budget turbo info! Not enough truck content on KZbin.

[@RealNikoBellic]

I found you guys from buying my own Hardbody and would like to see more honestly and I do watch some of the other things you guys post. I think a few vids ago you guys mentioned off roading and I would still love to see some of that!

[@RealNikoBellic]

@@LocalLosers520 That sounds sick! Can't wait

[@kw2537]

Follow up on the simple turbo! Dyno!!

[@kw2537]

@@LocalLosers520 I've been looking at doing a similar build but using a really small T3 turbo, not for drifting, more for autocross and general fun. You guys have been a great resource, thanks again for these videos.

[@johntomlin803]

I think we keep wanting to see the hardbody vids cause it’s a vehicle that just does not cross anyones mind as something that could have a lot of potential an it’s a good looking vehicle but just not desirable at least with the die out of low rider trucks now it’s a street truck gen. The new awakening of fast trucks with the TrX an Raptor fast trucks are the new thing now.

[@jkingjdm8470]

I still watch all ur guys vids cause I like your guys channel , but I do enjoy the d21 stuff

[@miguelmarrero7020]

Hardbody stuff!

[@saxsc2014]

Hardbody!!!

[@Huber872]

Love it!

[@rayd3485]

Did you guys ever end up dynoing the hardbody after the turbo build series. If so what were the figures?!

[@josephschmier3733]

I haven't turboed mine bc I need to pass emissions

[@TeamBlush]

Good information! We'd suspected as well that the tolerances on that mating face would need milling, but it sure is beefy. We'll probably go that route for our own upcoming build. Keep up the good content.

[@skitoles]

beautiful donuts!

[@dannycaminero1630]

I like your guys hardbody videos, because there full of good information, and you show how to make them faster😃

[@Hyperfiuze]

I miss driving my Hardbody 🥺 i remember i got that manifold when i had plans to turbo the NapZ and i can confirm they are very well made, thick metal, but yeah guys keep it going, good job! 👌🏼🙏🏼

[@kapilaciancio1889]

Love watching the mini truck vids. Keep um up. Btw can you guys do some vids on the KA dual cam motor

[@edwardmcgowan9206]

Haven't turbo'd mine because I don't have the confidence to do so... 😔

[@edwardmcgowan9206]

I've watched it twice but am afraid of the fabrication parts where I don't have all the tools needed and my hurtbody is my daily driver

[@edwardmcgowan9206]

I'll see what I can do with time and funds lol ill post it if I get her done

[@edwardmcgowan9206]

Think you could get away with 7psi instead of 5psi on stock napz z24?

[@homarflores4650]

I like you content i hope you gays keep posting more opten videos from d21’s

[@izzyplusplusplus1004]

I say do whatever is fun. But personally, I dig the hardbody stuff.

[@jonathanfrench5412]

Keep up the hardbody content is my vote! I just got my first hardbody a week ago (it came with a turbo! Not installed lol). I'd love to see you guys do another turbo build, like a t3/t4 ebay turbo build on a hardbody. (Definitely not because that's what I want to do on mine or anything...)

[@nathanialhoppens8489]

Love watching all of your guys stuff for the Nissans first thing I did when I got one was the egr delete I learned from your videos p.s. jb weld with a nickel works perfect for the exhaust tubes .... now I just finished up my first complete cab engine and trans swap on mine building low budget drifter.. #that1shopwi

[@samuelarant7680]

Hardbody Content!! Honestly I’m still waiting to see the final Dino run from the “simple turbo series”. Honestly one of my favorite series I’ve watched on KZbin. I really enjoyed watching how simple it was for your turbo set up. Felt like something they would do on Engine Masters.

[@JoeyArispe]

Does this manifold work on a z24i engine by any chance? Thanks for the content!

[@LocalLosers520]

no idea

[@jasonboness3871]

I'm about halfway through adding a T3/4 turbo to my HB. Fabricated the intake adapter yesterday, Rev9 turbo manifold installed, intercooler is in. I'll update you with a video when I'm done. One question, do you use the factory Oxygen sensor on the exhaust or do you just delete it? Turbo arriving today, need to drill and weld the oil return, and get the supply line in today. Thanks so much for the info and guidance! I'll take off the Rev9 and check for flatness, the new gaskets look like they seal well.

[@jasonboness3871]

@@LocalLosers520 you're still running a stock ecu in the simple turboed truck right? How does the ecu know the fuel mix? Just offthe MAF?

[@jasonboness3871]

@@LocalLosers520 Roger, I'm just trying to finish up the exhaust right now. Thanks for all your help!

[@jasonboness3871]

@@LocalLosers520 You probably know this but you can configure the AEM wideband guage's output to supply the correct voltage to the factory ECU. So you can provide the signal from the AEM o2 sensor directly into the ECU. Just found that out.

[@jasonboness3871]

@@LocalLosers520 Yea, you set the calibration to 'P4' on the back of the gauge, that set's the correct voltage/procedure for the stock ECU. Maybe it could make the KA24E-T run better? I'm just waiting for a silicon intercooler adapter, a boost gauge, and an oil fill-up and I'm ready for first startup this week sometime!

[@Skylinevidz]

I love the hardbody videos the most but i dont mind other drift car videos once in a while

[@sic3kgt]

I only care about hardbody stuff. Nothing else honestly.

[@d21dusty72]

@@LocalLosers520 burn are them other cars a hardbody?? 😭😭

[@matthewdoyle2473]

Hardbody

[@AstronautKitty-w5y]

I didn’t like your rims but they look good sideways

[@roosbinpancan2380]

Offroad?

[@mariolara3503]

Local loser thanks for replying to my comment on an old video u guys had made thanks 😀👌👍I think if u guys make a video for a full lip kit or body kit for a hardbody 《on a budget》I think that will be awesome.... and please not that rain gutter side skirts

[@dandonovan7328]

Hardbody stuff !