REVEALED: The Secrets Of My Novritsch SSG10 (Wolverine BOLT HPA)

[@magaz]

“It looks pretty long on camera, but it’s not actually that long” my wife said the same thing to me after our second date…

[@xxs1lentk1ller30]

Ok

[@voteboris1900]

Ok

[@kylejones6836]

😂😂😂😂😂😂

[@kungpochopedtuna]

I did it. I built it. I took it out for its first game yesterday, and what a day I had. The first problem encountered the airline wasn't quite fitted properly on the grip so had to take the cap out and push it in a little more so it sealed. And then the feeders in my mags kept getting stuck and not pushing the bbs round. But other than that what a bloody great system. Bolt pull is a dream, and the range an accuracy(I was using vorsk and nov bio.43gbbs) are lovely too. Thanks for making this video it helped alot with the process! Can't wait to take it out next Sunday for round 2! And if anyone is wondering about making one of these do it!

[@bk89846]

Does anyone have a video that shows how to do it from the stock version of the SSG

[@AngryBullAirsoft]

Love this kind of video - full break downs of the rifles used, why, how they were done. Amazing mate as always. Thank you.

[@bbsp_airsoft]

The whole camera power solution with the camo cable vines into the stock is just brilliant

[@techno7468]

Thanks

[@simwins]

I’ve got the tridos tdc on my ssg24 and love it. He’s a clever guy, not the cheapest but a good consumer experience. Having the mtw milspec and a inferno gen2 in my old g&g, I love watching you use this engine. Loving the tech content. 👌🏽

[@ShadowSniperUK]

10:03 you little beauty. Been wondering what you've done for that return. Thank you CM

[@GrayFoxAirsoft]

It's good to see little tear down vids like this

[@awramfischer5956]

Hello, Where did you find your double cocking lever please ?

[@tannerg4511]

I'm building my own as well! JG Bar 10 Wolverine Bolt Action army hop chamber Autobot 70 deg silicone Bucking EDGI 407mm barrel Scope - Nov scope Suppressor - modify suppressor Wolverine Cat 5 reg

[@rdb9936]

How did you get on? I have a tuned spring VSR, but thinking of doing a specific HPA build. Thanks

[@Mdglenn56]

How did you get the ambidextrous bolt?

[@xZYTECx]

Hey Camman, Question, where can you get that bolt pull? the 3d printed one? It looks absolutely stunning and i need it for my AACt10 HPA aswell!

[@iketeg]

I need one where can I buy one thanks

[@bash83845]

Brilliant watch! I'm currenly contemplating converting my SSG96 to HPA and given they share many of they share many of the same internals, i'm guessing your video will be a massibe help to me , thank you :)

[@Carsonsimon]

When I had my bolt I ran the macro line through and into the rear of the stock and had it exit about 3/4 of the way back out the bottom with about 1.5 inch of macro out, Gave me some flexibility and movement on the line at the rifle end. I also drilled a hole in the side of the butt stock and ran the battery cable out there and into a stock pouch. So no longer needed to keep taking the butt pad off for the battery, also kept my Allen key in there for adjusting hop because I ran the standard AA hop unit...

[@bladezx2]

Tha's great idea for the battery wire. Might have to look into that.

[@helpdeskjnp]

So I just got my Full Thrust in from Novritch, and I figured it would fit with my existing nozzle but it comes with its own nozzle… so I had to use it with my Wolverine Bolt system which has this rod that goes I to the cylinder… the Full Thrust doesn’t have that. But so far it shoots well. I’m taking it outside tomorrow to shoot it in the light to see how it does. I might have to modify it or it may not work at all. We shall see.

[@samuelcojcoariu4896]

Hi, i also have the full thrust and i dont know if will work fine.have you test it? Thanks

[@helpdeskjnp]

I kept the Bolt hardware except I used the Full Thrust nozzle which doesn’t have the little extension rod that goes into the bolt… but it would still shoot, I just had to have the pressure turned up as high as it goes on the regulator… and it would end up shooting decent. Shot like 285 fps consistently with the psi cranked up to almost 180. I’m still working on it to see what it will do.

[@samuelcojcoariu4896]

Thank you :)

[@rdb9936]

Is HPA more consistent/accurate than upgraded spring sniper? Thanks

[@helpdeskjnp]

I would have to say yes it is more accurate, because there is no recoil. My spring in my ssg10 would rock the gun every time it fired. But if you do go with HPA you’ll never go back… but it can be a technical challenge upgrading the ssg10 to the Wolverine Bolt. Have to get a standard non-Novrich trigger to modify, and get the JGBar10 cylinder. This video is excellent at showing how to do it though.

[@GraduatedPuma12]

Man I've been asking for this for months. Thank you, you're my favorite airsoft KZbinr. I wanted to get a second ssg10 and put a Wolverine Bolt in it as I have one sitting around and it needs to be used.

[@Mark_B544]

You need to get out more mate then

[@joshuahoward2057]

Love this sort of video the behind the scenes stuff haha same as watching load out videos I can watch them for days😂

[@bcluap]

Thanks for the vid. Thinking of going this route but was wondering what max Joules you can get up to and at what regulator pressure. I want to be sure I can get to 3.4J on .45's or else it wont be worth my while. I'm also thinking of building a tank into the stock... do you think that's possible? What kind of volume do you think would be needed for say 100 shots?

[@WarAngel72]

Hi Canman. Absolutely love your videos . Can you tell where I could get an ambitious bolt pull handle for the SSG10?

[@CammanExtra]

This one is 3D printed.

[@Louisxs650]

@@CammanExtra Would it be possible to get the STL file ?

[@kungpochopedtuna]

​@Louisxs650 it's on thingiverse

[@ZenHara5aki]

In this video you say the Wolverine Engine didn't work better with a short barrel. And then in Nov 2023, you redo this gun with the short barrel. I'm looking to get into sniping and I'm looking for advice. Can you compare the effective range/accuracy for both for us? Cheers!

[@bladezx2]

Great video. Wish I'd have had it available to me six months ago when I was installing this in my SSG10. I used a piece of 3M double sided tape to hold my switch, didn't have the guts to drill a hole, but it works great. I ran my hose out the read of the stock after drilling a small hole. Didn't want to have the nozzle sticking down like you do for the same reasons you have using the tape. Great video, plenty of detail and it's in english...Now to cut down a spring and find that 3d print.

[@kungpochopedtuna]

It's on thingiverse I got one printed yesterday

[@Banana_man-cm]

I ordered the vsr10 version with cylinder. Will it still work with the ssg10? Scratch that I switched it out for jg bar 10 version.

[@TheFluffyBunny1337]

You will NOT drain your battery if you leave it in. There is no drain, since there is no FCU. You only close the circuit for the solenoid when you pull the trigger.

[@RaptorAirsoft5]

So I know you showed the battery but I don’t think I heard you say if it was lipo or what exact kind of battery it is. I just need to know what kind of battery to get

[@bk89846]

Do you have a video available that shows you turning it from the stock? SSG into what you have now? Or do you have somewhere someone that has done it

[@Tacticaltimmy-123]

Every time I go to my local airsoft Field there is this 1 guy who is taking inspiration from you, wearing the same as you and has the same sniper as you with the same attachments and stuff 😂

[@highteirgod]

Bolt action M4

[@kubrows]

the short bolt pull how did you make it short ?

[@Nan-z4r]

Where I can find out this bolt hanlder? Thanks

[@HiKrush]

Philosophical question: if you swap all components in your ssg, is it still ssg? Or better, if you'll swap all of components in vsr-style sniper, does it makes difference if it's cyma, or actual vsr?

[@maca557]

What is compatible version of bolt for ssg10 ? The bar10 or vsr ?

[@StantonLuke]

Jgbar10 version??

[@lerksworld1651]

what mm lens do you run on the scope cam? saw they sell a 35mm and 50mm option....

[@WarAngel72]

I am not sure which HPA bolt to get the 10bar or the VSR ?

[@StealthyFox_83]

What co2 adapter do you use? Or do you have a small tank in the stock?

[@UMoederPoetstToilete]

What Bolt did u buy? For vsr10 or jgbar?

[@nickbettterknown]

Awsome video mate what cammo tape are you useing on your ssg ? And were to get it ? Cheers 🍻

[@CammanExtra]

It’s Jack Pyke Tough Tape

[@HighKaliber]

Thanks for this showcase! Just to confirm, you use the JG Bar10 version of the bolt and not the TM VSR10?

[@CammanExtra]

That’s right. 👍

[@HighKaliber]

@@CammanExtra Thank you for the response. I was actually about to do this build with the VSR10 version thinking it would fit better. Glad this video went up before I made the wrong purchase :)

[@Imaydn]

Anyone know if a Wolverine Bolt M fit into SSG10? Cant seem to find a topic nor video about jt

[@danielwalstad7634]

if i can hear the return spring to the bolt pull ( i`ve cutted aproximately like yours) but i hear the sound of the spring making a typical spring sound. Can it be that the spring is to hard? don`t remember what M*** spring ive used.

[@Mdglenn56]

Is there a way I can get the same bolt handle?

[@dddavid132]

Same

[@samokandil6403]

I also want to assemble the ssg10 in HPA, can you write what internal parts you used and where can I buy them? well thank you

[@kungpochopedtuna]

What do you mean? he says what parts he used in the video.

[@PerStianDigranes]

If you make a video like this, but only backwards ... From stock Ssg10 to your setup with parts and links to everything and how did it - I'm sure you'd get one million views! I'd replicate that setup for sure! This makes it a bit to hard for me to follow so I'd rather just stick to my stock Ssg10 rather than upgrade.

[@aliqnasri5994]

which one better, srs hpa or ssg hpa?

[@jonathanbanuelos3601]

This is awsome man when i go to order from wolverines site it asks me if its the TM Vsr10 or BAR10 i may have missed it in the video but witch version is it thanks again!!

[@kungpochopedtuna]

Bar 10 for this setup

[@kfactor39]

Would this work on the ssg10-A3 platform? I would assume it would but just was curious

[@SupremacyDealer]

Wich one can be fitted on a m40a5 tm?

[@WatchingTheo]

Whats your thought on the BOLT M over the original BOLT? Do you think it would fit the SSG10? Thanks!

[@CammanExtra]

The Bolt M doest fit the SSG10 without significant modifications.

[@danielwalstad7634]

and what powerbank do you use to fit in the stock?

[@CammanExtra]

This one fits a treat… amzn.to/3q3jrO8

[@trell1011]

Which Bolt system did you purchase, I have the SSG 24 and looking to do the Bolt set up?

[@CammanExtra]

I'm not sure if there is anything compatible with the SSG24.

[@trell1011]

@@CammanExtra ssg10 and ssg24 look like same internal.

[@dillonoffield4705]

Yes I have the ssg10 and want to hpa it what version of the bolt you used the tm version or gg version if anyone knows would be greatful

[@LeagueCritic]

jg i think

[@kungpochopedtuna]

Bar10 it says on the website if you look

[@Mhg01jw00]

Thanks for sharing. Best regards from Germany. 🌳💚

[@AirsoftBearuk]

As a point of interest I use thin hair bands instead of bits of inner tube

[@kungpochopedtuna]

Very pretty

[@randysandstrom9534]

Which model SSG10 ? A1 A2 or A3

[@sammyhd2864]

So does your barrel go into the suppressor like that bcos you have the short outer barrel on or?

[@sammcguinness]

He bought a longer barrel

[@arvydasbareikis8836]

Very impressive results on this stuff 💪 I do have ssg92 m1 or m2 non folding stock can i get installed this to my rifle or anyone can recommend someone who can do it for money in Norfolk playing on combat action games Norwich site

[@benwills2240]

How did you get the paint to stay on? The rubber body doesn't hold it very well I find

[@kungpochopedtuna]

It is clearly not "on"

[@sammyhd2864]

What length inner barrel do you have in this?

[@CammanExtra]

428mm

[@radeknovotnytv2283]

What is the difference between bolt m and bolt for jg bar 10?

[@kungpochopedtuna]

One is mechanical one is electromechanical I think

[@NL-hw4kg]

So why would you prefer a hpa sniper over a spring sniper?

[@bladezx2]

I prefer HPA because it's quieter, the bolt return is so much easier, and it's very easy to dial in your FPS with HPA vs springs.

[@rdb9936]

@@bladezx2Is HPA more consistent/accurate than a well tuned spring build?

[@bladezx2]

@@rdb9936 HPA is more consistent fps. Accuracy would fall more to the hopup, bucking,barrel and bb weight

[@rdb9936]

@@bladezx2 Noted, but would you say a HPA is more accurate than spring with same hop up, barrel and bucking assembly? Thanks

[@BushmanOutdoors]

I thought you used a striker

[@kungpochopedtuna]

DOES ANYONE WHO COMMENTS ACTUALLY WATCH THE FRICKIN VIDEOS!?!? WHAT ARE ALL THESE QUESTIONS!!!???!!!???

[@Classifiedinformation-p1v]

YES SO TRUE!!!

[@dddavid132]

$300 for the bolt wtf anyone wants to sell me one for cheap 😂

[@christophermiller1844]

I hate HPA so much, shouldn't be allowed in competition.