Revell Porsche 934 RSR Martini 1/24 scale 🚀how to🏁 full build 0⃣7⃣6⃣8⃣5⃣

#adhoccars #Revell #Porsche934RSR #Martini #modelkit
Hi there, welcome to the new episode on Adhoc cars, this time I will share with you some highlights from building process of Porsche 934 RSR Martini livery. I couldn’t find much about this particular car, apart from that it has been driven by David Betts in 1977 on Portimao circuit. At the early beginning Porsche 934 had a turbocharged 3-liter engine that delivered 485HP later on the it has been increased to 550 HP. With the acceleration under 4 s it was a real beast. During a 23 year career, 934s won 72 times, 58 took 2nd place and 49 took 3rd place. There were 23 races when 934s took all the podium place. Not bad! It was my 2nd scale car and I can honestly say that it was really challenging for a beginner like me, tiny decals like fender lines which could tear apart just by looking at them, parts which didn’t fit as they supposed to or additional effort to get as glossy finish over decals as possible. So I wouldn’t recommend this kit as a first one to try your hand at scale car modelling. it requires a lot of preparation time along with tremendous amounts of patience. But… The more challenging the kit is the more you are satisfied with finishing it, isn’t it? I think it doesn’t look bad and I am quite happy with the result. Ok, You can find the list of materials in the description and Tamiya paints used in this project as well. Hope you like it! Enjoy! Cheers! Oh, and please remember to hit subscribe button, Thanks!!
Recording just for entertaining purposes, there might be as many ideas for doing it as number of all diecast in whole world :D
I am a beginner but I am not afraid of mistakes :)
If you enjoy the video you can like it, subscribe the channel, leave a comment or even donate via Paypal.
Each option above is warm welcomed!
Thanks for any support given!
If you like it please subscribe, more cars and DIY are up to come!
If you enjoy this content, feel free to buy me a coffee to help keep me fueled while I spend nights creating it. THANK YOU :D
www.buymeacoffee.com/adhoccars9D
Instagram / adhoccars
Revell Porsche 934 RSR Martini
Primers:
Mr.Hobby Surfacer 1500 Grey
Mr.Hobby Surfacer 1500 White - decanted
Thinners:
Mr. Hobby Leveling Thinner 400
Tamiya X-20A
Paints and conversion:
Manual Revell Tamiya
K 4 X-2
D 9 XF-69
L 78 XF-24
C 90 X-11
E 91 XF-56, X-10
I 94 X-12
A 99 XF-56
B,F 302 X-18
O 730 X-26
P 731 X-27
F 378 XF-54
G 314 XF-78, XF-3, XF-2
H 7 X-1
J,N 330 XF-7
J 382 XF-28
M 371 XF-19
Clear coat:
Tamiya X-22 Gloss Clear Coat
Panel lining:
Tamiya Panel Line Accent Color Black
Decals:
Microscale Micro Set
Microscale Micro Sol
Wax:
Soft 99 Fusso Coat Black
Assembly:
Microscale Micro Kristal Klear
Tamiya 87038 Extra-Thin Cement
Polishing:
Tamiya Masking Tape 18 mm, 3 mm, 1 mm
Tamiya 87069 Polishing compound - Fine
Tamiya 87070 Polishing compound - Finish
Tamiya 87192 Polishing Compound Sponges
Tamiya 87090 Compound Applicator
Tools:
Airbrush MIG AMMO AirCobra 0.3,
Tamiya 74522 Spray-work painting stand set
Sanding paper, files, sponges: 600/1000/3000/4000
Drills: 0,8 mm and 1.5 mm
Sharpie Black Permanent Marker
Tamiya 74052 Decal Tweezers
OLFA KB-5 knife
Italeri 1 mm Paintbrush
UHU Patafix white, removable adhesive pads
Microfiber cloth
Other tweezers and pliers from DIY store
Cotton buds and toothpicks
Credits:
Music:
All tracks from KZbin free music library
Intro:
Intro/Outro/Banner Creator : Admj707
KZbin Channel : / admj707
Picture: Free vector from: vectorportal.com
Music: Dude - Patrick Patrikios
Font: Porsha Condensed from www.dafont.com
Adjustment: Adhoc cars

[@KitBuilderChris]

This is absolutely beautiful man, nice work

[@AdHocCars]

Thanks a lot, mate! I am trying to do my best! 😀

[@paolo-gt40modelworks]

nice job !

[@AdHocCars]

Thanks!! 😀

[@janvanrenselaar5998]

You did a great job with this kit. Just 1 tip: After applying the decals on the wheel,spray it over 2 times with clear-matt or satin. Then the decals stay nice on it in the future and the used look of the rubber stays there. New sub here from Spain.

[@AdHocCars]

Great!! Thanks for your tip I will definietly follow your advice 🙂 I have heard and seen that some of scale car modelers also paint rubber wheels. Is it something that is recomended? I would think that paint on the rubber can crack and easily fall off but I might be wrong as I have already done just 2 project 😄

[@janvanrenselaar5998]

@@AdHocCars just a light mist a few times. Don.t overdo it. Give it a shot on a not used wheel.

[@MrDarkD96]

Woowww amazing job,so clean.😮👍🏼

[@AdHocCars]

thanks a lot for your comment!! I am really happy that you like it 😀

[@ThatMofoDamon]

Fantastic work done! No way you are a beginner. I will be looking forward for more of your builds.

[@AdHocCars]

Thanks a lot! It motivates me to do next projects 😁

[@kirol124]

Naprawdę super wykonane!

[@AdHocCars]

Dzięki! 💪😎 Kolejny model nad jakim będę pracował będzie miał mniej kalkomanii :D

[@marcus7947447]

Great job.

[@AdHocCars]

Thanks a lot!😃

[@christianolsen2472]

Nicely done! Great video!

[@AdHocCars]

Thanks Christian! I did my best! Glad you like it 😀

[@miniporscheclub]

Very nice build. It looks amazing.

[@AdHocCars]

Thanks a lot!! 😀 I really appreciete your feedback!

[@JohnneeD1]

Nice build! Subscribed

[@AdHocCars]

Thank you! I will try to do my best and do better projects!😁

[@carlwynnjr6508]

pretty work...

[@AdHocCars]

thank you!! 😀

[@jakubmaecki1340]

Wygląda lepiej niż na zdjęciach produktowych Ravela

[@AdHocCars]

Dzięki!!😃 bardzo się cieszę! :D

[@inzMaraz]

👍

[@AdHocCars]

thanks!

[@RackwitzG]

This build came out excellent! I'm working on the Jägermeister Version atm and am thinking about lowering the ride height. It is too high for a race car.

[@AdHocCars]

Thanks a lot! That's sounds like a really nice idea, indeed this modelkit needs lowering 😀 are you going to build a revell or tamiya one?

[@RackwitzG]

@@AdHocCars The Revell one. I think the Tamiya one may not have that problem.

[@AdHocCars]

I think the body and other parts are almost the same in camparision to the Martini livery. Oh yes I am quite sure that Tamiya doesn't have any problems with their model kits :D

[@jcalvillo]

Were you able to lower the ride height on this model?

[@RackwitzG]

@@jcalvillo I didn't try afterall.

[@baptistefauchille7995]

Wooow alright there is no way you are a beginner because I am and it doesn’t look like that at all 🤣 Nice work!

[@AdHocCars]

I am a novice!😂 still strugling with correct ratio of paint and thinner😆 still trying to not mess anything while gluing 😄 thanks for positive feedback! I am quite sure that your projects look better then you percieve them! 😄

[@majktyson6275]

Bardzo ładny model Ci wyszedł. Te detale silnika są ciekawe, lakier się ładnie błyszczy i jest dobrze wypolerowany. Fajne jest to Porsche, bo na ogół ludzie sklejają pomarańczowego Jagermeister'a a tu miła odmiana w postaci białego Martini. Pomarańczowy będzie do kompletu :) Mam pytanie, może będziesz pamiętał : w jakiej proporcji rozcienczałeś clear x22? I jakie ciśnienie dałeś przy malowaniu clear? Jak dobrze rozumiem, dysza to 0.3 mm?

[@AdHocCars]

Dzięki! Zgadzam się absolutnie, za mało jest filmów o budowie tych białych wersji a zdecydowanie wiecej Jagermaistera 😀 do polerki i perfekcji sporo jeszcze mi oraz temu modelowi brakuje, mam jeszcze 917stke w barwach Martini od fujmii do zlozenia (ta zostawie na koniec, aby jak najmniej zepsuć :D ). Jasne, rozcienczalem dosc mocno 1:4 gdzie 1 to X22 a 4 MLT, cisnienie 1Bar, dysza 0.3, kazda warstwa z 15 minutowym odstępem. Nie wiem czy te ustawienia to przepis na sukces, ale zdają się byc dobrym punktem startowym 😀

[@majktyson6275]

@@AdHocCars Czy MLT to Mr color Leveling thinner?

[@AdHocCars]

Tak, konkretnie, Mr. Color Leveling Thinner 400 😀

[@majktyson6275]

@@AdHocCars Dziękuję za odpowiedź. Pozdrawiam, Mike.

[@user-mq6kr4vc4i]

Это G1 Jazz

[@AdHocCars]

transformers :)

[@user-mq6kr4vc4i]

@@AdHocCars more then might the eye

[@kastasrenars744]

Very nice! I'm thinking about buying this same model. I don't have any tools for it. Is it necessary to use a paint gun? Does it all come pre-prepared and I just need to put it all togheter? I have almost no prior experience working with models.

[@AdHocCars]

Thank you for your comment! The model kit you're considering is definitely nice, but I must caution you that it can be quite challenging for a first-time model kit builder. For instance, the decals can be very delicate and easily torn, especially the ones on the fenders. To ensure they stick properly to the curved surface, you will need to use a softener. Unfortunately, the parts are not pre-prepared and are fixed in sprues that need to be cut. You will also need to apply a primer before painting. When it comes to painting, you have a few options - you can use a spray can, airgun, or brush. If you prefer the easiest route, you can stick the decals onto the body and then cover it with a clear coat from the can. However, this method may not yield the best results. Other parts can still be painted with a brush, but without using primer, the paint can easily come off and the covering may not be smooth. If you're looking to get familiar with the painting process, this may be a good option, but it's important to manage your expectations. If you're new to modeling, I recommend considering a kit with fewer parts to start with. This way, you can build your skills without becoming overwhelmed. Please have a look at links in the next comments. :)

[@AdHocCars]

Porsche 959, easy and cheap to start with :) kzbin.info/www/bejne/q5C6Z5pta9p3eNU

[@AdHocCars]

Porsche 911 Turbo, nicely done kit, really easy to assembly kzbin.info/www/bejne/eHWZpZ19ltabg6M

[@kastasrenars744]

@@AdHocCars I do have experience working with small stickers/parts. I built an F1 model car in the past. I'm mostly worried about the painting part. I don't know where to start or anything, haven't had any experience with that. I saw this exact model Martini Porsche but with paint included and I believe it was marked as "level 4". Should I buy that or is it an even harder assembly? Also I was intrigued by the 911 turbo, maybe I'll buy that one instead.

[@AdHocCars]

Ok, I have checked, and I could not find the Porsche 911 RSR Martini set with paints and a box labelled 'Level 4.' All of them were labelled 'Level 3.' It seems that it is the same kit sold either with or without paints. In my opinion, Tamiya kits are the best to start with, as they have no quality issues, and everything fits perfectly. However, if you like challenges, do not hesitate to try this RSR set with paints. Manage your expectations and have fun, because it is all about having fun :)

[@ungurdani8346]

Salut my friend super car super video subscribe subscribe.

[@AdHocCars]

Thanks a lot for your positive feedback!🙃 I really need it as I am in the midle of finishing 917k from Fujimii...Frankly speaking it's a nightmare!😶

[@ungurdani8346]

@@AdHocCars thank my friend subscribe subscribe

[@mat_faktormodels]

Świetny model🙋‍♂️ i super film :) ten model czeka u mnie w szafie 🙈 ale jeszcze poczeka🤣🤣🤣 zapraszam do mnie na kanał YT 🙂🙂🙂

[@AdHocCars]

Dzięki! trzymam kciuki! :D widziałem Twoje prace i na pewno nie będziesz miał z nim żadnych problemów :D:D subskrybuje! :)

[@paulschnier8273]

What is the liquid you put the decals in?

[@AdHocCars]

Hi! I used Microset and Microsol :) amzn.to/3R6XrMj

[@AdHocCars]

I put decals on water :)

[@user-bt2lz4ts6p]

Научи, сенсей!

[@AdHocCars]

Благодаря!

[@user-bt2lz4ts6p]

@@AdHocCars Please teach me, sensei. You're cool!

[@AdHocCars]

It's really easy, just have a try with a car model kit that you like 😀 have you ever tried to do some model kits?😁