Review: Alpinestars Bionic Tech V2 Protection Jacket

Check out the unboxing and quick review of the all new for 2020 Alpinestars Bionic Tech V2 Protection Jacket
From the alpinestars website: "Incorporating a new, innovative grid protection technology that is lightweight and ventilated, this versatile jacket has CE-certified protectors incorporated into the slim fit, stretchable material for high levels of comfort. Compatible with Alpinestars Bionic Neck Support and with Bionic Hydration Pack." www.alpinestar...
Purchased from Rocky Mountain ATV: www.rockymount...

[@jayedponte]

Nice thorough review! Definitely a good reassurance of buying this. Thanks!

[@BigIronMoto]

Thanks for watching!

[@selectmxvideos8382]

Really good review, been looking at getting the Alpinestars Bionic Tech but wasn’t sure, but after watching this I’m getting it. Thanks 👍.

[@BigIronMoto]

Glad I could help! Good choice.

[@kenjboyd6233]

Good review, thanks! I have the V1 version, & it has exceeded my expectations, so this one has to be great.

[@BigIronMoto]

Thanks for watching. Good luck with the purchase.

[@marksimoneau1333]

The part where you put it on was so helpful! Thanks!

[@johannestaufer7637]

Thank you for the video and greetings from Bavaria

[@torquecanyon8424]

One of the best review. Thanks!

[@BigIronMoto]

My pleasure! Thanks for watching.

[@wujektimon1]

bought this one, till now I have used leatt 3df airfit (but old version with CE level 1). You can feel that Alpi give you more protection but I am wondering if plastic shield will absorb energy as good as 3DF foam. What is more, in Alpi, mesh material is not "skin friendly". If you wear it without any undershirt, it is rough:/ I bought M size (174cm, 70kg) and it fits tight.

[@RC.56]

Thanks for the continued updates through the video. How is it holding up?

[@BigIronMoto]

Ok. Started to disintegrate over a few years. Still wearable though. I moved to the Leatt 3D Air which I like a bit more. Both are great though.

[@braziluluwita8268]

Thank you sir for the very useful clip.

[@serbangavrila7248]

Great review! One question tho, did you go a size larger on the jersey to accommodate the armor ? I go with Large for the jersey ( kini) that goes well with a chest plate without shoulders. I was wondering if i have to switch to an XL jersey because of this armour . Thank you !

[@BigIronMoto]

Yes I did. Did measurements and cross-referenced on AS site. Armour fits tight so I use the same size jersey. Thanks for watching!

[@Skywalker41TV]

Been a long time since you review it, after 2 years, do u still recommend this this model? Do u still use it or replaced it with other? Thank you. Keep up with your videos and progression!

[@BigIronMoto]

Excellent armour but I prefer the Leatt 3DF air jacket now. I did a comparison but lost the SD card. 🤦🏻

[@irinatocan4315]

Do you think this protection jacket would be suitable for women as well? There isn't a version for women yet and I feel like the chest protection is better for men's jacket than for women's because is removable and can be tightened

[@BigIronMoto]

I can’t say. I think the 3DF material like Leatt or Fox might be better

[@nickwalpole877]

I wonder if this would work with a leather jacket. Say wearing it underneath for the road. Would give a good level of protection

[@PoBoyR6]

Great review! Looks like the chest protector is removable via the top/bottom clips. Is the back protector also fully removable? I’m hoping to use the jacket with shoulder/elbow protection only for tame MTB trails and strap the chest/back protector on for the gnarly stuff.

[@BigIronMoto]

Unfortunately not. I don’t think it would be ideal for mtb. The back protector is permanent and substantial. You could wear it but you might find it a bit restrictive for mtb.

[@digilume]

I am split between this and the Leatt 6.5 Protector Jacket. Do you have a pros /cons comparison? I like the slimmer look of the ASBT over the Leatt but the Leatt has the added advantage of the protector and jacket being separate, plus it looks like the Leatt has better protection on the sides. Thanks, liked and subscribed.

[@BigIronMoto]

As far as I know the Leatt offers more protection particularly around the kidneys. But, it’s bulkier and because it has harder surface I don’t think it is as breathable. They also make a lighter version similar to this one by alpine stars and my wife uses it. She loves it I think it’s called a 3-D air or something. Honestly, I don’t think you can go wrong and I think it’s more about your priorities. I’m willing to sacrifice some protection for breathability and better manoeuvrability and that is why Prefer the alpine stars or the 3-D air but if you want Max protection then go for the hard ones with kidney protection

[@digilume]

@@BigIronMoto Thanks good advice. I went for the Leatt 6.5 with jacket, Leatt dual axis shin and knee protection, Trilobite 661Parado jeans, HILLBILLY "FULL FINGER" GLOVES with wristgaurd and Alpine star boots. A low speed faceplant into asphalt on an electric unicycle yesterday and didn't feel a thing.

[@milordas]

Alpinestars A10 v2 looks cool

[@findingneutral]

Great review 👍.

[@ruben003]

is this good for the road too? it changes a lot from level 1 and level 2 protection?

[@BigIronMoto]

No idea. I don’t wear it on the road. Only off-road.

[@arok_audio]

I've been using it while riding my ninja past few months, it's more responsible to wear as apposed to no protection(on hot days), but I feel it would be best to wear a Kevlar/leather jacket over it, weather permitting

[@petebusch9069]

Why don't most of these have side protection? The only one I see with that is the high end Leatt 6.5, why is that, is side protection not really needed?

[@BigIronMoto]

I’m not sure. There is some protection but it isn’t as much as the Leatt 6.5. Always a compromise between protection and light / cool. If protection. Is paramount the 6.5 makes the most sense

[@jdm1200]

Hi, thanks for the review. It's been 2 years, how do you like the jacket over time?

[@BigIronMoto]

I prefer the Leatt 3D Air. This one kind of fell apart. Leatt is more comfortable.

[@jdm1200]

@@BigIronMoto Thanks. I was looking at the Leatt when I saw your review.

[@justinspirational]

Thanks for your review..How's the airflow/ ventilation and temperature in hot weather?

[@BigIronMoto]

Pretty good. Not the coolest armour out there. I would say 7/10 in hot weather.

[@justinspirational]

@@BigIronMoto ok thank you.. are to saying there's another model of armor that's cooler with just as much protection? Thanks again

[@georgeisdaman]

Hey Sean. Great review as always..What does the strap do @5:58 ?

[@BigIronMoto]

They are little bungee cords with tethers on them to hold your neck brace down. Most braces have small clips on the side for the bungee to run over and keep the brace taught

[@georgeisdaman]

@@BigIronMoto Thanks

[@TimboG-tr6oo]

Great video! Sorry for the late comment but is the Bionic Tech suitable for riding on the streets? I‘m thinking of wearing this with just a hoodie over it but I wasnt able to find and info on the material. Does it protect me when sliding on asphalt?

[@BigIronMoto]

I doubt Alpine Stars would recommend that.

[@yesilozan]

Hi Sir, I am considering to buy this product to wear under my Alpinestar jacket by removing its own protections and couldnt find any info that may work or not.. Did u have a chance to try it under a jacket for adventure ride?

[@BigIronMoto]

I don't ride ADV bikes so I don't have a very informed opinion on that. However, I wear it under jerseys and it fits fine so I don't see why you could't wear it under a jacket.

[@ModularMuscle]

Do you need a buddy to pull the jersey over the jacket? That was my issue with the A10 roost guard

[@BigIronMoto]

Nope.

[@SS-gm4bl]

Can anyone suggest which armor is more comfortable? Fox titan or Alpinestars bionic action v2?

[@raddestraven]

Are the seams itchy? I bought the Dainese Rhyolite 2 and the stitching is nasty if you don't wear a base layer. Your helmet looks very loose, do you get a big head when your out riding?

[@BigIronMoto]

No, not itchy. I forgot to put my padding in my helmet after I washed it when I did the video. That's why it looks weird.

[@krb1230]

Are you still wearing this? How has it held up over time?

[@BigIronMoto]

Yes, still wearing it. Probably about 150 hours on it now. Overall, I am really happy with it but where the mesh fabric connects to the back spine armour it is starting to rip. Same with under the arms. Considering how rough I am on my gear, I can't complain. If it can't be fixed, I would likely get the same one again new. It has saved me from some serious injuries for sire.

[@porfiriuspiridon8738]

Hello i am curious if i can use this armour in a every day use on the street. Should I buy a jacket ?

[@BigIronMoto]

It’s intended for off road use. Unless you are riding a dual sport, there are better solutions.

[@Rushfan74]

can the chest/back protector be worn without the shirt?

[@BigIronMoto]

No. It’s part of it.

[@maxlocke1]

Did you wear this two weeks ago at the Chloe's Kingdom XC? (And the previous weekend at Gopher Dunes?) Do you still find it comfortable and not too hot? Thanks!

[@BigIronMoto]

Yes and yes. I wear it every time I ride. Very good airflow. Don't find it any more hot that a jersey.

[@maxlocke1]

@@BigIronMoto Thanks! I think I'm going to get one also. I was kind of on the fence between replacing my current gear with that one or the Leatt 3DF AirFit but your feedback and two others have helped me decide on the A-stars.

[@BigIronMoto]

@@maxlocke1 I think either you are good with. My wife has the Leatt 3DF AirFit and I have to admit, it is very nice. I would say try them both on and see what you think.

[@maxlocke1]

@@BigIronMoto No one seems to have the A-stars jacket in stock locally. I have an older Leatt 3DF vest that I currently wear but it's starting to show the wear and tear. I'd like to go back to a jacket style and while it would be nice to try on both brands and either would probably be good, I think I'm going to go with the A-stars if FortNine gets them back in stock again or I find another Canadian retailer with them. (Royal Dist'g and Lang's don't carry them.)

[@BigIronMoto]

@@maxlocke1 I got mine from RMATV (no one in Canada had it)

[@amnonhayman]

Great review! Can you please note the jacket size and your height & weight for reference ?

[@BigIronMoto]

I am a 42 inch chest and 5'8. My weight is 165-170. Bought a large.

[@wushuplayer]

@@BigIronMoto What size Atlas neck brace did you get please?

[@BigIronMoto]

@@wushuplayer large.

[@Ladosligese]

Would this be viable for street wear under a swetshirt etc ? . or is it designed for offroad only

[@airadaimagery692]

I was told that it’s mostly for impact protection, but if you want abrasion resistance you need to wear something else over it. I’m trying to decide on body armor, but it’s a tough decision when you ride a dual sport in adverse weather conditions...

[@Ladosligese]

@@airadaimagery692 i`m thinking of getting this to wear under my oldschool leather thick cowhide jacket .. yes i`m past 40 so :D . reason i have that jacket haha

[@BigIronMoto]

Meant for off-road use.

[@peterbodi3870]

Someone said this jacket is ok for crossbike and no good for street bike cause its very veak if you fall ok asphalt at 60miles /hours Im not sure it is right or not

[@BigIronMoto]

Don’t know. I only use it Offroad.

[@airadaimagery692]

It has no abrasion resistance, only impact protection.

[@bluecollarblood1830]

Will a leatt 6.5 neck brace work with that jacket?

[@BigIronMoto]

I can't say. Never tried.

[@kiwi-moto]

How does washing of this work? Machine wash with pads in it still?

[@BigIronMoto]

I put it in a tub filled with laundry detergent along with some other stuff like boots, helmet, and just wash by hand and hang to try.

[@kiwi-moto]

@@BigIronMoto thanks, yeah seems all these style of armoured shirts are hand wash.

[@joshua7999]

Why don’t they have something like this but for pants?

[@BigIronMoto]

Not sure. Probably because protection is not really on the thigh area. I wear high end knee braces and boots. I wouldn't want any protection on my thighs or anywhere else on my legs.

[@Enduro_Cobra]

Would you recommend this in extreme heat? If not then what's your best recommendations???

[@BigIronMoto]

Sure. I have rode with this on in 35C+. It has very good ventilation.

[@informedwolf9124]

Can you wear that as the only protection when riding on the road?

[@BigIronMoto]

I doubt it. See if Alpine Stars recommends it. Likely will get shredded in a road slide IMO.

[@Daot888]

I’m 5'9 can I use large or stay medium? And can I use this for sportbike like street riding

[@BigIronMoto]

Best to check fitting guide on website. I’m 5’9 and 155 lbs and wear a medium. Not intended for sports bike. Off-road use.

[@paulwatson5965]

Doesn’t appear to have any rib protection

[@typrall9028]

À défaut d être grand et fin, j ai dû vendre le miens car il était trop court au niveau des bras. Dommage, il est vraiment bien

[@user-tu1ii7jt7c]

quelle taille fais tu ?

[@typrall9028]

@@user-tu1ii7jt7c 1m87 pour 72 kilos. Un peu tard la réponse 😅

[@user-tu1ii7jt7c]

@@typrall9028 Merci quand même

[@Life_a_bike]

Wrong neckbrace for that protector jacket 😉

[@416sv4]

Could I wear this for a motorcycle aswell?

[@BigIronMoto]

No idea. I wear it Offroad. I don’t think it’s designed for street

[@FROSTY420692002]

It looks very tight on you

[@BigIronMoto]

Yes, it is. I like it that way.

[@FROSTY420692002]

Can I get a xl I’m 5’9 42.5 inch 200 lbs

[@BigIronMoto]

Don't think I can help you with sizing. Look to the sizing chart on Alpine Stars website and decide from there. Thanks for watching. Please subscribe.

[@JoshStreetDesign]

I'm 6'1 185lb lean weight lifter, got an XL. What none of these review videos talk about it that the back protector is WAY to big, irritatingly sticks into your lower back and is very annoying. When you bend it catches the floating chest protector and juts it up into your adam's apple practically choking you. I returned mine immediately.

[@BigIronMoto]

I guess it fits everyone differently. I am a lot shorter at 5'8 and don't find it digging in my back at all. I still love mine 2 years later. Which one did you end up getting to replace it?

[@JoshStreetDesign]

@@BigIronMoto I got the new leatt 6.5 and that thing is way better in every way

[@JoshStreetDesign]

@@BigIronMoto I also got the moose racing armor shirt and that thing is freaking amazing I love it with my old leatt 4.5 chest protector

[@BigIronMoto]

@@JoshStreetDesign nice! I will check it out. Thanks.

[@jasonfullbright4230]

@@BigIronMoto what size did you get?

[@miangelo1946]

Thnx, good review,,, Whats with the helmet??? XXXXL To large ;)

[@BigIronMoto]

Just forgot to put liner back in after washing.

[@Kolsch221]

It tears super easy. Alpinestar warranty is horrible.

[@BigIronMoto]

That's true. After wearing it for over a year, the material under the arm pits and back is coming off the armour. I still really like it, but this is a downside of the jacket. I am going to try to stitch it back but it may not work

[@oscar4605]

Which body protector did you get instead?

[@Kolsch221]

@@oscar4605 Rocky Mountain ATV came though and warranty it. So I got another one, cross fingers so fare zero issues.

[@oscar4605]

@@Kolsch221 Nice! For how long have you had it? Im looking at this one vs Leatt 3DF Hybrid. Any thoughts on this?

[@Kolsch221]

@@oscar4605 I’ve never used Leatt. But if you go that way Rocky Mountain Stands behind what they sale.

[@jruba]

What’s wrong with your helmet ? I can see your ears 😆

[@BigIronMoto]

In the video I put in a caption but when I put it on I forgot that I didn't put my padding back in after washing it.

[@ScragNath]

Great, made in China though, I'll give it a miss.

[@laryangel4082]

7

[@plantpower3048]

The leatt 6.5 pro is better