Review & How To Use KOLSOL F02 Underground Cable Locator Wire Tracer for Dog Fence Wire

[@g.3046]

I didn’t like the video for the Dog Fence wire locator portion since you didn’t connect to an actual dog fence system - but - I gave the video a thumbs-up since the video seems better than the last 20+ I reviewed. At least you kept the camera still . Thanks.

[@1framistan]

It's not a VOLUME control. It's a SENSITIVITY control. And you are CORRECT about keeping the sensitivity low. Otherwise, it will give tone over a wide area.

[@ladykd2355]

Thank you so much for showing how this works.... I bought this and read the directions and had no fking idea wtf they were talking about in the directions. Almost sent it back. Lol.

[@genedala3986]

Not sure it is a good idea to put black and red clips together. My experience indicated the signal is reduced. Maybe black to ground or just not connected would be better option.

[@AndyLaViolette]

Love this video and your channels! Cheers!

[@Alan-ui1wq]

I got the F02 Pro version and it seems to be quite different. When the probe is waved over the signal line, there's a momentary drop in the volume so you have to listen very, vary carefully. Also, I found out by accident that the probe still reacts even when the antenna isn't connected so it seems almost more like a metal detector.

[@raybu9816]

Great video one question is would it detect if the coax cable is broken somewhere

[@bleckb]

I need to trace some wires possibly in pvc pipes that run beneath concrete. Will this track through that? Thanks.

[@taufanrock9354]

Brother, how about the high voltage cable which still energize. Such 20kv U/G. Is it aplicable to using this tool?

[@zoeyspeace]

how deep are your cables burried? and are they in plastic or metal conduit? thanks.

[@justadadtips]

mine were only about 1 foot in the ground and not in conduit

[@michaelmalone4268]

Do you have to disconnect the power for a dog fence line

[@sloflo1]

Does it work for tracer wire on gas lines?

[@justadadtips]

Yes

[@daryllect6659]

Why wouldn't you turn the transmitter volume all the way up?

[@Saturday8pm]

… because the hum tone becomes continuous and therefore useless. Turn it down to eliminate unnecessary hum. I’m learning how to use this too. Lamppost cable break no more than 18” deep. Can’t find the break yet, hence this video. ✌️