Review LEXIVON LX-771 Butane Torch Multi-Function Self-Igniting Soldering

A useful micro-torch that is useful in the shop as well as the kitchen. A variety of tips are included which makes this useful for wood, leather and plastic crafts as well as plumbing and soldering. It's about $30.
Amazon Product Page: amzn.to/2YtWnsA (affiliate link)
Disclosure: free sample reeived for review. Affiliate links may be used in product description.

[@barbarajohnson7782]

Thanks Micheal for sharing! I always enjoy your videos and find them very helpful!

[@gilbertsung610]

Thank you, Michael. Your explanation is clear and more than the manual can tell me. I'll subscribe you.

[@dmitrygear]

Just got mine 771 - thanks for the vid. Very helpful!

[@michaelerbreviews]

Glad it helped!

[@patrickzadd5215]

your video is one of the most concise….. thank you

[@michaelerbreviews]

You're welcome!

[@radhwangothic]

Very informative! Thank you so much

[@bigmike1015]

Great help! Thanks mate 🙏

[@michaelerbreviews]

Glad it helped!

[@mihaipopa9414]

Nice video, thanks!

[@chewykarma]

Good job. Useful info. Thx

[@michaelerbreviews]

Thanks. Glad you found it useful.

[@Mark_B544]

Still wonder why they say “self igniting “ as it’s really not. You have to light it 😂 Good video

[@michaelerbreviews]

I kind of know what you mean but I disagree. It is self-igniting in the sense that you do not need to use an external ignition source such as a match or lighter. It is self-igniting using a built-in piezoelectric spark.

[@azizhachimi8744]

Great Hreat review Sir, subscribed!

[@michaelerbreviews]

Much appreciated!

[@joeh690]

What would you want to use the heat shrink tip for versus the deflector tip for ?

[@adama1294]

Bigger heat shrink.

[@cherylkrasucki591]

How do you put on the other tip? The standard tip can just drop on but cant figure out how the other tips go on?

[@michaelerbreviews]

Cheryl Krasucki I explain how you put tips on at 4:39

[@joliele-vu3824]

Hi Michael, am I to hold on to the "Inition" at all times while using this for soldering? Thank you.

[@michaelerbreviews]

If you want to keep the flame going you would then lock it on using the lock function as I demonstrate at 2:31

[@arturotorrescano1845]

Que medida el la entrada. Del gas o la boquilla. Que debe de entrar Al. Deposito de recarga…?

[@normanklein3155]

What is the purpose of the deflector tip? What application is it designed for?

[@michaelerbreviews]

The 'deflector' allows shrinking insulation tubes on electrical wires after done with soldering

[@Apiarist_X]

Can you tell me please, what is the diameter of the flame pipe? If I purchased on I would like to add an attachment that needs a diameter of 22mm.

[@michaelerbreviews]

14.26mm or 15.5mm when the flame guard is in place.

[@edwincastillo8280]

Do you know if the pen version of this same brand will do metal on metal soldering, or just this particular one.

[@michaelerbreviews]

I have no first-hand knowledge of that, sorry.

[@edwincastillo8280]

@@michaelerbreviews ok thanks

[@luisgomez385]

Quick question I was given this exact same torch but the flame is so small even when moved to max. What would be the problem?

[@michaelerbreviews]

Are you certain you filled the butane tank properly? If there is a lack of pressure, that could explain the lack of flame.

[@luisgomez385]

@@michaelerbreviews Yeah I double checked. The pressure is what I'm thinking as well. I'm just going to leave it alone for a bit before I do anything to it.

[@tristineckhoff2843]

Take your can of butane and and just like when you fill it up just put a shot of butane where the flame comes out, it will clear out anything gummed up in it.

[@italomolina6583]

is this torch suitable for propane gas?

[@michaelerbreviews]

Butane only

[@WaschyNumber1]

If you use a water sponge, you will destroy over time the soldering tips.

[@oryno2293]

Its not full the pressure in the Tank and torch are even

[@DARKxARCHANGEL28]

This tool is identical to the dremel one

[@michaelerbreviews]

I have not seen the Dremel torch but it is not uncommon for the same product to be sold under different brand names.

[@leilahankinson4498]

I totally disagree, the case is very nice and even padded. you don't get more than with others. but the pamphlet IS however, sparse

[@leilahankinson4498]

AND....the stand is better than other!!! not such a great review for my little awesome torch. I really recommend this torch for light duty jewelry soldering

[@michaelerbreviews]

The case is cheap plastic and the locking tabs will eventually break. The stand is ridiculous. It has a small amount of mass compared to the top-heavy torch enabling the the torch to fall over quite easily if it is bumped or the table you are working on gets bumped. The torch itself is fine.

[@bobjohnson48]

He needs to invest in a table for demonstrations! 🙄

[@michaelerbreviews]

Yes he should

[@therandomnessoftheuniverse]

unsafe usage is very dangerous and hes showing some very poor handling disappointed

[@michaelerbreviews]

So sorry you are disappointed. This was a quick review of the torch kit and a brief discussion of its operation.