Review of XWST 12V to 24V 10A DC Waterproof 240W boost for boat, golf car etc

[@huggmeister]

Very nice video sir. It answered all of my questions. I am going to use one of these to power up an AC1200 outdoor wireless point repeater from a solar panel and battery at a remote location. The wireless point needs a 24v power injector energized. Output voltage looked very stable at varying input voltages from your test. Looks like it will work for my application. Thank you sir, great video!!!

[@cimselling9785]

Nice work on the video, I was looking for a more commercial DC-DC for a laptop power supply @ 19V and was worried about the quality of this style of power supply but after watching your review I am considering using one and the brand you used. good work

[@anthonysanico1045]

Quality item Im using 12-19.5v for the laptop It's good

[@MarkPrince1317]

Thank you very much Brother your videos always very interesting and informative Best regards from Philippines 🇵🇭

[@JuanAntonioPedrajasPineda]

Congrats for your video! I have a CPAP that I want to feed from a 12v battery, and it runs at 24V with 3.33 amps of consumption, that's what the manual says. If this converter gives an output of 10 amps it exceeds notably the electric demand of the CPAP. As long as it seems that a 3.33 amps output is not commercially available, what output would be more convenient, 3 or 5 amps? Thank you, sir!

[@MrVinced1201]

I like you video but I have a question for you. When you setup for the short circuit test, the reason you did not see a spark was because you jumper wire was wired correctly and all of your other test leads were too. So at that point all you did was just hook positive to positive and negative to negative.

[@martink9785]

Great test, thanks

[@tanishqbhaiji103]

Please load it till the output shuts down pulling 12A is not really an OCP test, also please add ripple testing.

[@WattHour]

I did short circuit test which is short and 12A . I did 12 because it showed to be useful. it can handle 12A but I did short circuit protection. Short circuit is actually protecting the device.

[@antreaskonstantinou8585]

Can backfeeding this 24V at the output damage it?

[@JMAGG]

Will this add noise to a car? Will it cause interference to my radio? Thank you :)

[@solomonirungu1804]

Thank you much

[@WCO3]

Hey Watt can you hook this to the Pv side of a mppt Victron charge controller? Then limit the current within the app to 10 amps. Oh and why did you stop making videos?, I hope all is well and big ALOHA from Hawaii

[@WattHour]

Hey, yes yes you can can connect. as long as the voltage is within the input range which I have explained and don't remember now. I am doing well. have been buy with other thing in life. thanks for asking. Stay safe. Hello from Canada.

[@igorkvachun3572]

Yes👍 ⚡

[@e.a297]

What are your equipments? Create a video about your equipments. Thanks

[@harryhimpson5663]

can i connect this to my 24V oven and connect to my 12V battery ?

[@WattHour]

this works with DC device. does not matter what kind you connect. You connect 12V at the input and it will output 24V simple as that.

[@alkmaar2013]

I have the 12 volt to 48 volts 6 amp but the wires are getting to hot to my opinion 70 degrees what should i do

[@WattHour]

70 degrees is normal.it should be okay.

[@alkmaar2013]

@@WattHour Fahrenheit or celsius mine is celsius 70 degrees for the device is ok but for the wires not

[@johncrute5124]

Could I charge a 24v bicycle battery from my 12v vehicle ?. Tia.

[@anthony445]

thank you

[@WattHour]

You're welcome

[@gersonesteban8268]

Can charge my powerstation?

[@WattHour]

When you charge a battery you need to have a power supply that you can set the current that is called constant current or CC. Using this module. You cannot set current and it will damage your battery.

[@FidaHussain-fu7mh]

12v input & 70v out u have available or not?

[@WattHour]

What amount of current 10A 70V?

[@WattHour]

What amount of current 10A 70V?

[@davaadorjd9370]

Xw-12-24-240w can i use it to run an electric bike motor

[@WattHour]

Yes you can to maximum of 10A

[@ahaikepo7984]

can i input 24V and i get output 12 V?

[@WattHour]

I have done all possible tests. See if I have done it or not. I have expalined it fully. your question tells me that you have not watched the video. Please watch.

[@johnshaw359]

Can you parallel these?

[@WattHour]

Yes you can.

[@mgames.222]

감사합니다

[@WattHour]

물론이죠.

[@totrantien]

How are you now

[@WattHour]

Hello, I am good. How are you?

[@totrantien]

@@WattHour Long time no see your upload, glad you're fine

[@ninuasneofox]

Idea Electric bicycle