[Review] Turbo Racing C71 Full Proportional 1/76 RC Car with RX7 Body

[@TwixedBlocks]

I love the turbo racing controllers like the P52 you mentioned in this video and I was thinking of getting one for my C75 but the reason I’m not getting it is because it doesn’t have the type c charger built into the controller which is something I love on the original controller because it makes it easier to take with you

[@burkey8037]

Ahhh finally a real review by a a real enthusiast.

[@olafschermann1592]

It is a RX-7 turbo - of course it is faster than a mini. 😁

[@Jamie_06]

Mazda rx7 is my favourite mazda

[@wanpachaysri1081]

So cute. I love this car. I think that it's nice to have one. It's suitable for tiny room or tiny house. Thanks so much for uploading. Blessings.

[@sindbadsailor7868]

I have both of them… it’s really fun… buy or make your own track, then race it… it will be super fun…

[@beesod6412]

Something for me and my coworkers to drive on break. very cool!

[@BeaversHobby]

It's fantastic for office grand prix.

[@beesod6412]

@@BeaversHobby I agree, I really like the extra bodies.

[@AussieGunzel]

This is perfect for OO scale model railway layouts to add life.

[@heinies_hobbies]

Can you sand the tires smooth? Seems like a lopsided tire bounce

[@BeaversHobby]

I suppose so but the thread is so shallow I'm afraid by the time it's smooth, the tyres will be bald.

[@별빛여우-c1o]

Just got F&F limited edition. I think its stock transmitter is far better than the one coming with Mini due to integrated charging port feature.

[@Swooshpragler]

I was considering getting one of them at a later date, and this video is a blessing. Precise as usual with your explanations, now I truly know what to get according to what I intend to use them for (or rather, surface to drive on) Thank you!

[@Swooshpragler]

Well, in the end I went ahead and got the Mini! I still want the RX-7 but not yet, for now a bit of wooden table fun will do :)

[@i_am_terom4810]

what an amazing car ! would love to see the pop-up headlight version (with fixed state, i dont think it would be possible to make them move)

[@BeaversHobby]

It'll need a servo to pop the headlight and unfortunately there's none that would fit.

[@sinoyt99]

@@BeaversHobby dude where are u from

[@TheStuartstardust]

@@sinoyt99 LADDA batteries - so a place where they have IKEA 🤓

[@sinoyt99]

@@TheStuartstardust thanks

[@muaythai193]

Imo the “drift” versions are actually best for racing, because of the lower grip tires making it more realistic. It’s not good for real drifting of course, but perfect for simulated high powered rwd racing with street tires (slight oversteering).

[@ulmwurttemberg1682]

"something a little bit different" gwah ha haa. punny, my dude. real punny.

[@narechok1489]

What do you think if we shift the battery behind and put some tape on the rear wheels will it drift?

[@BeaversHobby]

Did the tape trick. It sort of worked but couldn't really hold it for long. It's kind of doing donuts but the steering isn't fast nor violent enough to make it fully drift.

[@ccitationx7045]

@@BeaversHobby look bro, at 1:76 scale, even a small slide is enough. This video has convinced me to pull the trigger and purchase, great review!

[@deliveredlate]

Hello will the mini cooper turbo racing car work with the remote of the turbo racing c71

[@BeaversHobby]

Yes, it will.

[@andrewwillard5625]

Buying this now and 3D printing drift tires and a wide body kit

[@adrianau4246]

Hey, can one transmitter bind to all the different turbo racing car models? Thanks !:)

[@BeaversHobby]

Yes, it can.

[@tszkongkan9378]

and now, for the most important question of them all.... Will it drift?

[@BeaversHobby]

Unfortunately, no.

[@envy00013]

No? Or... not yet? :D

[@eeatsvaz]

great video, subscribed. ever have any issues with transmitter losing connection? mine seems to lose connection every 30 seconds or so.

[@BeaversHobby]

I've never got that. You can try re-binding it. There's a clip in the box that you can stick in the hole under the car to put it in bind mode and then turn on the transmitter to bind.

[@BoonZKuZa]

Hope next model will come with rear gear differential and fully ball bearing.

[@RypienGT]

Mine arrived today. Just charging now 👍

[@-FWATUSAIYAN-]

How much?

[@RypienGT]

@@-FWATUSAIYAN- Around $100 Aus

[@bwest6275]

Excellent review, thank you :)

[@bobtierney6946]

As all ways you have given the information that I want to know. Thank you.

[@alexc3330]

Hi ! I see "FHSS" on the box. Would this be compatible with your FS Noble radio and the FHSS dongle ?

[@BeaversHobby]

No, it's not compatible. The "FHSS" is just a generic name for frequency skipping method. The protocol is different so it won't work.

[@StasysCarvalho]

Amazing video

[@smallmodelcollector]

Hopefully the mfg is researching hard tires to see if it can drift. Might need a gyro built in though. I bet a proper drift car could be done in 1/64.

[@lowercentenary]

Already was 10 years ago and unfortunately discontinued...tomy Nano drift package lite...retailed for 50 bucks and now goes for 500 dollars from rip off ebay sellers lol

[@smallmodelcollector]

@@lowercentenary Thanks, I looked it up, looks cool. Hopefully a newcomer will do a proper micro drifter at a reasonable price soon. Quadcopter boards are small so I imagine a proper gyro drift car could be quite small.

[@thechampagneroom1]

@@smallmodelcollectorthey made a drift version called the c64. It has a gyro and hard wheels

[@olafschermann1592]

I wish in RC car hobby some RC transmitter protocol becomes an industry standard and they will ship cars without remote - like it happens quad copter scene. I love having 100 cars but i hate owning (and paying) 100 remotes.

[@BeaversHobby]

It used to be that you can install any receiver to the car. This works down to 1/28 but once they become smaller you'd wish there's a multiprotocol that can drive them all.

[@danielsimental2803]

Beaver, do you know if this can bind with multi protocol module?

[@BeaversHobby]

So far, no. I've heard someone is working on it but I don't know if it's possible or even if it uses any of these modules.

[@danielsimental2803]

@@BeaversHobby Thanks! Banggood has a really good deal on these without transmitter so I was hoping there was a way since I have a Jumper T Pro. I might have to get one anyway just in case an update comes out. I heard these are actually made by radiomaster and they use Futaba FHSS but only a random post while searching last night.

[@BeaversHobby]

@@danielsimental2803 Thanks for the info. I'll try that protocol when I got home and will update you.

[@BeaversHobby]

@@danielsimental2803 Unfortunately, no. It doesn't bind with multiprotocol on Futaba S-FHSS.

[@danielsimental2803]

@@BeaversHobby thanks so much for checking. I’m a huge fan of micro RC but perhaps I will just get into the k989 style cars so I can drive them with my Jumper

[@vito7056]

Can you please do a video on how to put this thing back together? I have no idea how to reassemble the steering/suspension springs. Your videos are my RC Bibles

[@vito7056]

I figured it out. Would still make a good video though

[@BeaversHobby]

I haven't fully disassembled it yet but thanks for the idea. If I ever do it I'll be sure to film it.

[@vito7056]

@@BeaversHobby note - the tiny springs go IN the holes above the steering mechanism. Thanks for you all your videos!

[@BeaversHobby]

@@vito7056 Thanks for the info.

[@pea2911]

great video! thank you. is it good for drifting?

[@BeaversHobby]

Unfortunately no, it can't drift.

[@pea2911]

@BeaversHobby that's a shame! but I wonder, if you covered the tyres with thin sellotape (like Scotch magic tape) would that make it slippery enough to drift on polished wooden tables or even glass tables?

[@BeaversHobby]

@@pea2911 The trouble is not that it doesn't have power, it's because of the size and the lack of gyro. At this size physics works against it to be able to drift properly even with a gyro. Most you can do is some donuts and maybe figure of 8.

[@pea2911]

@@BeaversHobby thank you for explaining, I also guess, at that size, there is no momentum (not enough weight) too

[@pea2911]

@@BeaversHobby this KZbin short suggests very small rc cars can drift? kzbin.infodozu18wKP1o?si=4tDJRHeyHbxRRZI_

[@George.T.83]

They sell it without transmitter in a very good price. Do you know if I could bind it with rgt v2 crawler 1/24 transmitter? It look like the same!!! Thank you.

[@BeaversHobby]

Yes, I think it'll work. Looks like RGT also uses TurboRacing transmitter like HobbyPlus.

[@George.T.83]

@@BeaversHobby thank you

[@BeaversHobby]

@@George.T.83 My pleasure.

[@syafiqcod6602]

nice beaver. how about p32 transmitter? is it worth buying to use at my k989 rwd setup.

[@BeaversHobby]

Yes, it'll work great. But don't expect anything from the integrated AVC system. Use a dedicated gyro unit. Also you probably can't use the channel 3/4 to adjust gyro gain remotely either because its channel 3 and 4 is just simple switch, not VR knob.

[@syafiqcod6602]

@@BeaversHobby alright. thank u beaver. 🤗

[@BeaversHobby]

@@syafiqcod6602 My pleasure.

[@sz8208]

Hi how long does the battery last each charge?

[@BeaversHobby]

I've got about 25-30 minutes.

[@bRACHiE-Man]

Is it possible to drive this car using the multi protocol module? Would be nice if the protocol is supported.

[@BeaversHobby]

No, it can't. At least at the moment it isn't supported yet. I don't know if they are working on it but I certainly hope so.

[@Darkgayo]

Thanks for Sharing! Can you test to Bind 1/76 RC Car with a NB4 Transmitter?

[@BeaversHobby]

It does not work with NB4.

[@BenzSwingDude]

If I charge with mobile phone adapter type A to C charging ? Will it spoil the toys ?

[@BeaversHobby]

You can use any mobile phone charger to charge it. It won't spoil the battery. No need to worry about that.

[@BenzSwingDude]

@@BeaversHobby Thank

[@alaskadroneracingleague5367]

the link to the big track does not work.

[@BeaversHobby]

Thanks. It's fixed now.

[@DCleave9895]

Just commenting on your newest video in hopes itll reach you the best. I seen one of your videos regarding the wltoys 1/24 scale compared to the 1/28. You mentioned where the 1/24 lacks is the huge lack of upgradable parts. Now my question is regarding one that ive not seen you mention, the a949. Its the 1/18 scale rally, similar to the k989. Does the a949 suffer the same downside at its scale as the 1/24 scale, or is it more like the k989 and have lots of parts to experiment with. I want something that i can try alot of what your doing with the k989 but at a bit larger scale. 1/18 even up to 1/24 but you dont recommend the a242. Ill probably end up going with the k989 in the end though, just curious on your opinion of the 1/18 scale a949 as i knows its designed more like the k989, as opposed to the 959/979

[@DCleave9895]

Thank you for your time beaver. As a canadian and as someone who got called "leave it to beaver" my whole life, love the channel name, and your content. Keep it up.

[@BeaversHobby]

@@DCleave9895 Thanks for the kind words. I don't personally have the A949 but I do follow the scene. It has plenty of upgrades that will strengthen the car as well as full aluminium upgrade. It's great for playing it outdoor and there's even 12mm wheel hex to install standard 1/10 wheel. You can do a lot with it.

[@dccollectoraz]

Damn this is awsome lol

[@soumenchandramallick8338]

Can I charge it with any powerbank Or any adapter??? As it doesn't contain any adapter fr it

[@BeaversHobby]

Yes, you can. You can plug the USB into any 5V power source that you charge your phone whether it's a powerbank or a USB adapter. It doesn't come with an adapter but you can also charge it with the transmitter as I showed in the video at 4:32 .

[@soumenchandramallick8338]

@@BeaversHobby You mean 5V means any mobile power bank to charge it ???

[@BeaversHobby]

@@soumenchandramallick8338 Yes.

[@soumenchandramallick8338]

@@BeaversHobby Oo thank you U cleared my all doughts You are thr best 👍👍👍👍👍💯💯💯!!!

[@soumenchandramallick8338]

@@BeaversHobby U replied in 3 minutes 😇😁😁

[@gamkkot]

I've bought this one and I've a binding problem. whenever Turn the RC car power on the binding is disconnected. So I have to re-bind whenevere I turn the car power on. How can I resolve this problem? Can you help me?

[@BeaversHobby]

Sounds like it's faulty. Contact the shop for a replacement or compensation.

[@Hamzamakesfunvideos]

Cool!

[@rickflamez5630]

The other reviews shows the neon lights on the car and I think you should probably don’t realise that

[@BeaversHobby]

Thanks for the info, there is indeed underglow but I filmed it in such a way that it doesn't show up.

[@rickflamez5630]

@@BeaversHobby You're welcome. Would it be cool if you 3d print the Tesla Cybertruck body on the turbo racing chassis? Because I think it's easier to design in my opinion.

[@超級眼鏡蛇]

if it could drift action that would be perfect!!!!!!

[@chenghao1545]

nice car!

[@rickflamez5630]

What is the axle diameter for this car?

[@BeaversHobby]

Wheel axle 1.2mm. Wheel diameter 9.4mm Sorry for the later reply.

[@rickflamez5630]

@@BeaversHobby Thanks

[@TampasHotwheels]

Awesome video my friend 👍👍 I can't believe I just found ur 😲...new sub here👍❤👊

[@iskanderdzulkarnaiendaud1436]

Can it drift?

[@BeaversHobby]

Unfortunately no, it can't.

[@s197gt6]

Just upgrade The motor on the mini it's faster and ride smoothly.

[@rfoerster]

Will it work with multi protocol module that you showed a while ago?

[@ianmangham4570]

No

[@jtkirk86]

Hey I noticed on some of your other videos you bind a TX16S to cars. Have you been able to do this with the turbo racers? I am interested in doing so. Recently got the 3rd anniversary ones that had 2 cars and 1 controller. If you know how and can share I would appreciate it. Thank you!

[@BeaversHobby]

Unfortunately the Turbo Racing protocol doesn't work with multiprotocol yet. I'll be sure to make an update video once... or if they add it to the multiprotocol.

[@jtkirk86]

@@BeaversHobby ah dang. Ok thank you so much for the reply.

[@SpikeJonesTheCr0oked]

Damn that is tiny.

[@chankenneth4231]

How fast?

[@BeaversHobby]

130cm/second

[@carrinhos4007]

Vídeo muito bom. Excelente Review. Se puder dê uma olhada em nossa primeira pista: kzbin.info/www/bejne/fIO8dICwbK98qqc .Em breve mais vídeos com novidades. Parabéns pelo canal

[@อนุวัฒน์ทับทรวง]

เอามาอัพเกรดให้แรงกว่านี้ได้หรือป่าว

[@BeaversHobby]

คันนี้ไม่มีอัพเกรดน่ะครับ แต่เดิม ๆ ก็แรงแทบคุมไม่อยู่แล้ว ถ้าไม่วิ่งบนสนามดี ๆ

[@ahhsjs5432]

Look at vine zz