Reviewing the Ancel V6 Pro Bi-directional Scan Tool on Ford 6.0 and 7.3 Powerstroke Diesels

[@TroyBoyReviews]

Your right, you make videos you enjoy and I’ll keep watching them. Just like hanging out with ya on here. You keep teaching I’ll keep learning!

[@ProjectTimeGarage]

Dude, thanks so much for this comment. This right here is 100% why I make content. I'm gonna pin this!!

[@TroyBoyReviews]

@@ProjectTimeGarage I actually bought a truck toolbox because of you. And I’ve been working on it last few days. Unfortunately couldn’t afford a weatherguard but it’ll make due! And thank you for pinning that comment it means a lot to me.

[@ProjectTimeGarage]

@@TroyBoyReviews you bet! Also, I bought my toolbox off marketplace for cheeeeep. I wouldn't pay what those cost new either.

[@TroyBoyReviews]

@@ProjectTimeGarage with that powerstroke that was having a problem with the scanner did it have a remote start? You may have to splice into the wire on the Obd to turn off your remote start and turn that function off to get live data. I had to do it to my truck it’s just a suggestion I have no idea if it’ll work in your case 😂. (Side note- my remote starter was aftermarket)

[@Lonewolf23-26]

I’m with Troy on this as well, I still learned something! Knowing what tools are out there and seeing someone use them is super helpful so keeping doing what your doing!

[@felixalbion]

VAG is for VW group cars including VW, Skoda, Seat, Audi and several others.

[@ProjectTimeGarage]

Good to know! Thanks.

[@eap.productions]

Comes in handy to diagnose common bugs that the New Beetle has, like air bag system faults! 😅

[@johncraig406]

Ordered the Ancel V6 Pro and the discount worked as described, thank you

[@ProjectTimeGarage]

Cool, I think you'll like it.

[@miatagod80]

Your link to scanner is dead now. Please update it so you also still get commission plus we can then buy it

[@ProjectTimeGarage]

Yes, it's been out of stock for quite some time now. I've bought about seven other similar items. Sadly none of them work with either app. So far I cannot find a suitable replacement at all. As soon as I do, I will absolutely update this link. Thanks for watching!

[@KXTG6500]

Thank you , great video. I have a no crank no start 6.0. will the Ancel V6 pro give me the info I need for ICP IPR FICUM and Sync I watch you FORscan video, also very good and just deciding as I have other not FORD vehicles

[@ProjectTimeGarage]

FORScan would be a better option.

[@jrome3264]

Great video. This does most everything my expensive scanner does.

[@ProjectTimeGarage]

Sure does

[@mikebarnett6984]

Live data... Is the key...

[@ProjectTimeGarage]

Indeed

[@antoniobarrios8867]

Excellent video Sir, what could I do when I need the diagrams? Thank you very much.

[@ProjectTimeGarage]

Nothing I've found for free, unless you find something on Google. I usually use AllData.

[@eap.productions]

Have you tried the X7HD yet?

[@ProjectTimeGarage]

No, I have not.

[@907gladiator5]

Will it show high pressure oil pressure when cranking it over?

[@mikemurphy9953]

I have the same question as 907gladiator5 ??

[@ProjectTimeGarage]

Yes, it does.

[@playstation2bigs]

2024 now that ancel v6 pro still functioning?

[@ProjectTimeGarage]

Yeah, I use it almost weekly

[@playstation2bigs]

@@ProjectTimeGarage do you experienced hang (stuck) issues ?

[@TheShipman1973]

What about live data like icp, ipr, ficm, ficm sync, and fuel pressure.

[@ProjectTimeGarage]

It was showing a LOT of Powerstroke related live data on my 03 with the 6.0. Not so much on my 01 7.3

[@jbbolts]

@@ProjectTimeGarage Hi, have you found anything better for the 7.3? thanks

[@ProjectTimeGarage]

@@jbbolts Yes, I sure have. In fact I have a full video on datalogging on the Diesel trucks with free software and a $20 Bluetooth dongle. Here's the video: kzbin.info/www/bejne/nJ6TZoOniZZrf6c

[@dakotavespo8924]

Yeah that’s what I want it for is live data on all that. My pc went dookie n I got a crank no start on my 6.0 n I’m trying to find a scanner that’ll read all that

[@williancontreras6508]

Muy buena su explicación patrón y sería tan amable de regalarme su opinión,,, tengo una Ford 7.3L año 2001 y presenta el problema de que enciende x unos minutos pero inestable y se apaga y ya le e cambiado la idm, la ipr, el sensor de levas, la icp y también se le reviso la pcm pero el carro no mejora que podría ser según su conocimiento, gracias y esperando su pronta respuesta 🙏...

[@JLCmike4014]

Sounds like you have an under valve cover harness problem. Those connectors wiggle loose and makes the truck run like crap.

[@ProjectTimeGarage]

I agree with @steam on this. That's a very common issue with these.

[@rockynix7731]

Check your grounds that would cause and intermediate poor running condition as well ....

[@edypablo6994]

Que precio tiene el Ancel V6 pro + para vehículos livianos y camiones ?..

[@ProjectTimeGarage]

It was approximately $400USD

[@TimDafcik]

Hello do you know if the V6 pro and the V6 pro + are the same tool ?

[@ProjectTimeGarage]

I think they're basically the same.

[@MrEyad1990]

Does it relearn throttle? Srs? And abs bleed?

[@ProjectTimeGarage]

It does.

[@phillipcoiner4232]

I just bought one. There is no option to connect to a Dodge? I have a 2009 3500

[@ProjectTimeGarage]

I've had it on a 14 RAM 2500.

[@phillipcoiner4232]

@@ProjectTimeGarage there is no option ( I can find) at the beginning that says Dodge maybe they have upgraded to include Dodge.

[@eap.productions]

Try selecting chrysler first

[@blakemanganelli3148]

#ProjectTimeGarage The video cut off. Can you disable the injectors individually?

[@ProjectTimeGarage]

Yes, you sure can.

[@johncraig406]

Would please link to the Android Screen Recorder app you are using? there are so many that are basically useless

[@ProjectTimeGarage]

The one I use is AZ Recorder, the free one - Here's a link: play.google.com/store/apps/details?id=com.hecorat.screenrecorder.free&hl=en_US&gl=US&pli=1

[@404notfound.....]

It's no autel but i believe i can work with it. Great video!! Subscribed!!

[@ProjectTimeGarage]

Yeah, I agree. I have a pretty serious Autel MaxiSys MS908S that only comes out when I need wierd stuff done. This scanner does pretty much everything day-to-day.

[@eap.productions]

And less expensive! Lol

[@sledgenft8856]

You awesome

[@ProjectTimeGarage]

Thanks!

[@darinhill5351]

Nice

[@ProjectTimeGarage]

Thanks

[@HDRFXeClassicHDV]

Огромное Спасибо за объективный обзор прибора!

[@ProjectTimeGarage]

Thank you!

[@johncraig406]

Okay, I have it in my hands. How in the hell do you get all that crap back in the storage compartment? Once you straighten out the OBDII cord, it is stiffer than a rubber ..... and it will not curl back into that area w/o the two Red plugs trying to go where they should not. Wish you had put the unpacking in SloMo, I should have taken pictures of the packing before I opened it, but no, I did just like you did, hauled it all out at once... BIG Mistake folks, take pictures as you Open it up first, so you know where things go.

[@ProjectTimeGarage]

LOL!!! YES! This right here!! I spent WAAAAY too much time trying to get the stuff back in there. Evidently it was packed by computer. Here's a tip, put the tablet in there face down so that if you do overstuff that compartment, it isn't pressing down on the screen when you close the box.

[@eap.productions]

It's probably a good idea to find a screen protector for it as well.

[@davidgooden219]

31 minutes in, starts to make sense.

[@ProjectTimeGarage]

I was given this to talk about it and hit a given amount of points. I did it as promised.

[@chriswithrow3107]

*likes video* *Comes back later to watch it*

[@ProjectTimeGarage]

Thanks a million!!

[@davidgooden219]

25 min in and some yapping slows down.

[@ProjectTimeGarage]

It does

[@davidgooden219]

Four minutes in, yapping.

[@ProjectTimeGarage]

*Little slider bar in the bottom of the window. You can drag it anywhere in the video.*

[@davidgooden219]

Ten minutes in, yapping.

[@ProjectTimeGarage]

Yep