Reviewing Timemore's 2024 products! [Timemore S3, Mini Scale, Fish Smart Pro Kettle]

Here's a look at some brand new Timemore products: Chestnut S3, Fish Smart Pro Kettle, and Timemore Mini Scale. Thanks to Timemore for sending these products to review. The brand has had no influence over the review and has not seen the content prior to publication.
Timemore Chestnut S3 amzn.to/49qIfkf
Timemore Mini Scale amzn.to/3xvGVyZ
Timemore Fish Smart Pro s.click.aliexpress.com/e/_DE8...
Timemore Fish Kettle (old model) amzn.to/3TJZlUq
📢 Disclaimer: The links provided above are affiliate links, which are an excellent way to support the channel.
As an Amazon Associate, I earn from qualifying purchases at no additional cost to you. Thank you for your support!
CURRENTLY ON MY BREW BAR
☕️ FILTER
Manual grinder: 1zpresso.coffee/store/ref/312...
Filter grinder: amzn.to/3LTSyVY
Burrs (for filter grinder) amzn.to/3FVgMeB
Scale: amzn.to/3K9FdY1
Kettle: amzn.to/3z986gN
AeroPress Go: amzn.to/3Zyze3L
Water dispersion: amzn.to/42G45Op
Drip coffee maker: amzn.to/3U11OcV
Cone Filters: amzn.to/3Zr8Toc
Aeropress Filters: amzn.to/3LO5dcS
Beans: www.kaffebox.no/?apply_coupon...
🚀 ESPRESSO
Espresso grinder: miicoffee.shop/products/miico...
Trad. espresso grinder: amzn.to/3Kb9EgI
Machine: www.breville.com/us/en/produc...
Mini scale: amzn.to/3lBKcri
Tamper: amzn.to/3Kc5t3W
Travel espresso: amzn.to/3z9MEYV
Beans: coffeebros.com/products/espre...
0:00 Intro
1:37 Timemore Fish Smart Pro Kettle
4:28 Timemore Mini Scale
8:00 Timemore Chestnut S3 Manual Grinder

[@coffeechronicler]

Timemore Chestnut S3 amzn.to/49qIfkf Timemore Mini Scale amzn.to/3xvGVyZ Timemore Fish Smart Pro s.click.aliexpress.com/e/_DE8fcMp Timemore Fish Kettle (old model) amzn.to/3TJZlUq Disclaimer: The links provided above are affiliate links, which are an excellent way to support the channel. As an Amazon Associate, I earn from qualifying purchases at no additional cost to you. Thank you for your support!

[@SaitekFreak999]

The Black Mirror is really good. Fast, good functions, no useless smart connectivity, sleek design and good size, all at an affordable price.

[@ArvinRosales03]

i also have the old version of the kettle. YOU CAN JUST PRESS THE ENDS OF + AND -, it'll adjust by 1 incrementally

[@Alph92]

The S3 is exceptional value. It feels way more premium than the other C3 grinders and the external adjustment feels extremely good. My only complaint with the grinder is that I wish they made the feedrate slower. Light and medium roasts can only be ground if you swirl the grinder while grinding and thus decreasing the feedrate of the beans.

[@xXzegnoXx]

Just gerning into pour-over and looking for my first kettle. Which would you choose of the timremores? Or is the fellow a better choice?

[@valentinkuznecov6256]

Fish smart pro is versatile for all round home use, but I do prefer kettles with flow restrictor. I damaged my wrist and holding it for a long time for slow pour is a struggle.

[@ayman8603]

Thanks for the review my friend. Is it worth upgrading my c3 to s3? Also, if u can compare it with the kingrinder k6 because they're at the same price in aliexpress, i already have Zp6 but I'm looking for a grinders with it to give me some body and sweetness 😅

[@hplou1]

I have the black mirror basic and looking for a more travel friendly option that does not compromise too much the UX. Would the mini fit that bill? Or is it too small for daily pour over or French press usage? Tak 😊

[@smallpp688]

What would be the starting range for aeropress? The Aeromatic app does not have this grinder yet.

[@dnullify100]

I'm hoping there are more entries into hand grinders for espresso at this price

[@glebcreativ1]

Does your Black Mirror mini have a problem with precision? Mine has a slight “jumping” up to 0,2g, so it jumps from 15 grams to 14,9 or 15,1 while standing still on a leveled surface.

[@stevegeritzen7876]

It would be interesting to compare the S3 with the C3 Series.

[@vizzo7]

the new kettle is slower heating up? how is that? it has 1350 w vs 900 w of the old kettle

[@omarhesham9214]

Couldn't stop myself from looking at the La palvoni at the back ! Is there any review about it any soon ??

[@coffeechronicler]

Maybe. Probably :)

[@karlkeat]

In terms of filter coffee, would you say there is a very noticeable increase in flavor and clarity compared to the C2/C3 grinders?

[@coffeechronicler]

Yeah, it's a pretty clear upgrade!

[@Raditram]

The original s2c burr in my opinion is pretty bottom barrel so it should be an upgrade.

[@Eirikkinserdal]

The timemore kettle is better to just set on 100° then let it sink to your desired temperature 😂

[@zhrimb]

I may be in the minority of people who prefer the buttons on the side of the Nano. I have the full size Black Mirror and I have accidentally pressed the top buttons when swirling my V60, never happens on the Nano. I love the angled screen too, the glare in my kitchen makes top-facing screens a little harder to see.

[@jeandrevanzyl2588]

Is your old kettle the 600ml (1000W) or 800ml (1500W)? I think the new Pro Kettle (900ml) is 1350W. If you have the 800ml, that would explain the difference in heating time.

[@coffeechronicler]

It's the 800 ml version, so that might be an explanation.

[@utiuandy99]

Have you tried any MHW3BOMBER coffee products besides the Sniper? I am very interested in your opinion of their R3 manual grinder.

[@coffeeistheanswer5923]

@ The Coffee Chronicler With which delta does the kettle reheat, e.g. after reaching the set point of 95C does it start heating at 94C or 93C. That was an annoyance to me with the old Fish which only startet with a 2C delta.

[@coffeechronicler]

Traveling at the moment, so can't verify. But yes, believe it was about the same.

[@coffeeistheanswer5923]

@@coffeechronicler would you double check for me :)

[@djmeri00]

Does the new scale fit under Cafelat Robot without any tricks?

[@coffeechronicler]

Unfortunately, just a smidge too wide

[@djmeri00]

@@coffeechronicler Ehh..., maybe next time, thanks!

[@TheHabadababa]

Don't you get a very consistent weight out anyway when using a direct lever? I basically completely stopped using my scale to weigh the output of my pavoni since I get 36-38g out every time very consistently so if I just dial in all my shots using a fixed output I have 0 reason to weigh it anyway. I would imagine the Robot is very similar.

[@coffeechronicler]

You can pull pretty long shots on the Robot, so a scale is definitely handy

[@paulnicholasadams]

For me the sliding on the old kettle is not good but what is worse is the power on/off and heat button being so unreliable.

[@lhsin861]

Does the kettle hold the temperate without boiling it again to the temperature set?

[@coffeechronicler]

Yes, you have both hold and heat to tempereature function

[@RobertFHarrison]

I own a bit of Timemore gear and have found all the stuff to be quite good. I have a smaller hand grinder from them that won't do espresso either, but is excellent for my Aeropress travel kit.

[@coffeechronicler]

Yeah, it seems like espresso is not a big focus for them. Yet...

[@smallpp688]

Do you know what the recommended starting point is for aeropress? I know it’s a bit finer than v60

[@darioplazas1007]

Hello, do you know the mill of MHW-3BOMBER BLADE R3? Do you recommend it ? You can do a versus

[@coffeechronicler]

Don't have experience with it, but it's on my radar ;)

[@eshanmathur4874]

I just ordered the Nano because of a discount via the electric grinder order, but maybe I’ll ask for a swap to the Mini. Main question: Did you feel that the change to a flat display vs the slant of the Nano was a downgrade in usability? It seems nice that it faced you more directly vs straight up, but I’m curious why they decided to undo that.

[@coffeechronicler]

As I mention, it's a bit awkward to touch the Nano buttons on the side. It just doesn't feel natural. So even though the slanted display was quite cool, the new scale just has a better UX.

[@cesarquintero1180]

I have to add, I use a Nano in a daily basis, if you come from Timemore or other scales it can be weird, but after a few pours it just becomes muscle memory, it is also something that you could use if you use a big brewer or cadafe like a chemex that could cover the buttons in the top.

[@SudburyMan]

I just bought the chestnut x and c3esp pro 🤔🤔

[@Alph92]

s3 is better hands down

[@minnymoony]

does the mini scale enter in between the Cafelat Robot legs?

[@coffeechronicler]

Not completely, but you can sort of get a corner in there.

[@michaelallen-essex7621]

Does the new black mirror fit in a flair 58 base?

[@khungreen9773]

In the metal frame with pad on and off - yes, great fit. In the rubber drip tray, you are contacting the corners even without the rubber padding on. On an elevated third party drip tray like the common metal one we see with the “f” logo, it fits comfortably without the rubber padding, little bit of contact with it on and needs to be zeroed again.

[@michaelallen-essex7621]

@@khungreen9773 thank you for the very detailed response!

[@dirkh2122]

The Nano is super annoying with the buttons on the side. I really like my basic pro. Update on the hand grinder burr would have been nice, since the timemore’s are always on the lower clarity rating. With the Sculptors being so well perceived in regard to grind/flavor, picking up on the hand grinders would have been neat

[@coffeechronicler]

The burr should be a slight redesign over the latest top models (X and X Lite). The clarity/balance is solid.

[@joshtlk]

For the s3 did you try grinding it for espresso? We couldn't get it to be fine enough for espresso even at 0 setting. Wondering if you are experiencing the same thing

[@coffeechronicler]

Patience - will get to it 😉

[@funkyphonicsmonkey]

I pulled some pretty awful shots using the S3. Was convinced the alignment was off. I've since returned it.

[@coffeechronicler]

@@funkyphonicsmonkey Sad to hear, it's not just my unit. Seems to be a pattern.

[@hisbrewcoffee]

@@coffeechronicler we detected the same thing too that it couldn't find fine enough. Havent really put it to the test. with filter brewing.

[@ShayanGivehchian]

The pro kettle is not availale for north american markets

[@coffeechronicler]

It's probably just a matter of time. If you're adventurous there's always Aliexpress :)

[@ShayanGivehchian]

@coffeechronicler I checked its 220v only sadly at the moment.

[@IamMotionMedia]

No idea why they changed the actual kettle the only problematic thing was base. So stupid. Is the new base backwards compatible with the old kettle?

[@coffeechronicler]

Good question. Will try and test it when I'm back from my travels.

[@paulnicholasadams]

Yes it is but you can't buy the base by itself

[@dvs3308]

I purchased the S3 and I don't like it. It only has 10 clicks for espresso. I used it with 3 types of coffee beans and on the finest grind size it is still not fine enough. Coffee (30grams) runs in 12-14 seconds. Way too fast. Next to this, the grip of the grinder is awful. And the exterior is hard to clean. Be aware: not suitable for good espresso!!