REVIVING a SCRAPPED 1972 Buick Skylark in just 3 weeks! BURNOUTS by the end of the month!

[@hitmann8420021]

Lol. I believe that. There's nothing relaxing about it especially in Michigan lol

[@HeadFlowInc]

The best head gaskets we’ve found for sealing less than perfect surfaces are made as problem solvers. 4.8/5.3 Mahle 54441 We’ve tested them up to 25# boost no issues

[@BDauto86]

Great info, thanks for sharing JD.

[@googleaccount2637]

The Skylark rules

[@HeadFlowInc]

Ultra Slick aka straight STP oil treatment with dye… now you know. 😉

[@Whosurdaddy71]

We can hear pops breathing when he shows up before we see him.

[@papatron-gr4wg]

Blame covid, messed up lungs, sorry

[@larryssnova76]

Not sure if you know this I’m sure you probably do but just going to say it anyway if you go to a gm dealer you can get the deleted dod plate that comes with the gaskets and bolts for like 45 dollars

[@jamessands2190]

Hell yeah just got here this gonna be a killer video

[@larryssnova76]

Love the videos keep them coming

[@acemabry1515]

Good progress

[@mikeclark740]

Sweet brother keep keep the good stuff rolling

[@donaldlawton7384]

Great work brother👍👍

[@TheBlaqDeval]

Great work, Josh and sadly grunt maker is out yet the golden 5.3 looks awesome and probably a black and gold stripe combo would make this car pop out real good on cruising! With gold engine too, sounds like a theme to me! Great work and wish u d keep on pushing on till it sees the road on its own power!

[@stevemacdaddy9909]

A lot of work my man. I know your up to the task.

[@GasCarGarage]

Nice progress on the Skylark. 👍💯

[@NTromb]

So what I’ve learned, depending on the year of the 5.3 not too sure about the 6.0. But the number six cylinder on that side where the engine surface and head gasket service was polished with a wire wheel. The number six cylinder usually runs lean and that causes a blown head gasket.

[@Kingcadillac816]

Early to the show finally

[@Darrin_Wyatt]

Looking great

[@Swaps-n-Stuff77]

my go to ultra slick

[@shanewright6958]

You can do it 👍👍

[@MrBReal-xc7qm]

Still getting better with the background music. 😎

[@VATION3RD-GEN-X-GARAGE]

This video reminds me of when I was a kid and I snuck in the living room to watching television with the volume off so my parents wouldn't wake up and beat my ass 🙃

[@Axial_Andrew]

"What did I get myself into??" A 1972 Buick Skylark is what you got yourself into, good sir...😎

[@jeffgraham48]

KZbin deal turned from fun to work!

[@lloydprickel825]

Work and work get a step ahead and 2 back they way the weather been here got alot of time to mess with the Buick

[@garyjohnston8000]

DUDE! i had the EXACT same situation in the 6.0 I bought, after absolutely drenching the btr truck Norris cam I got I was sliding it in and the middle cam bearing fell right out. I bought summits LS cam bearing tool it's a nice piece

[@garyjohnston8000]

Also what year is your 6.0 I bought the later style cam bearings at first that are bigger diameter if they're what you need I'll send em to you

[@wadebonhomme2142]

I know you want to supercharge it but sure hope the turbo from Jack makes it on it, great info and entertainment at the same time, thank you!

[@bluecollarhotrods9781]

I legit have an LQ4 from a 2007 Express van sitting in the garage with the same story and issue! They did a cam retainer plate and new oil pump, still had 5-7 psi at idle when warm. I started to pull the cam, same thing. So I said fuck this thing and put a trash bag over it. I plan to gap rings and do cam bearings. The rod and main bearings look brand new.

[@eddiebranham8070]

Ultra slick is all that used back in the day.

[@theotherbrent]

All of the autoshop teachers that are still alive just had heart attacks. A few turned over in their graves and they are all screaming that camshafts are made of glass so be super gentle with them. When you tossed the cam i heard all my shop teachers. Thanks for that memory and the laughing that followed.

[@diymisfit_Mechanic_UDX404]

Great, now I just pictured an m&m character as a Jelly bean. That stuff is messy, and stringy, webby like.

[@patrickbryant7845]

Cut apart an A-37 tapered roller bearing and drive in for DOD block offs in the valley…. I’ve done 4 like this and work absolutely perfect

[@rj_boostedz2897]

That motor def had the collapsed lifter problem if they took off one head

[@SniderTron3000]

Yeah, actually that would make sense

[@1411MEDIA]

Use steel it on the interior. Would come out pretty good. It has a nice finish

[@eddiebranham8070]

A 455 would have been more than enough for that. But you're using left overs 🤣🤣😉. So do what you have to do!!

[@mikedeotis526]

Woo-hoo can't wait to see its progress and in the end its 1st tire shred session

[@dannykirby7023]

Next time you need a 3bokt cam gear let me know I have spares

[@Kingcadillac816]

Once have more than one project and parts are scarce it completely sucks differently cost wise but honestly take the financial side out of way even problems seem be easier always financial side gets me

[@albertvenable4122]

Looks like a old model Oldsmobile motor lol

[@KarKamp]

A’guy can buy them plugs ya hammer in to them holes in the gen ferr’s im looking at trying some this weekend and you should start buying lifters by the boat load a full set for around 100$ ain’t horrible

[@kpeeks]

If they work on their car to relax, it's less than 10 years old. The rest of us go in it to relax...then 10-15 minutes later we aren't relaxed.

[@nitomeanboyGBODY]

😌💪🏼

[@theprostipimp]

Checking in from Zapata Texas #956 🤟🏽

[@Ls3guy]

You are not Spo to look at the cam bearing's

[@Kingcadillac816]

Be cool if they would send you some plastic LS mock up engines for your builds make ur mock ups easier but I can't even find data fuel display or climate control locally for my Cadillac lol every car guy has are cursed parts

[@SniderTron3000]

I've thought about buying one, but I thought I was being smart this time getting a kit for the swap lol

[@bluecollarhotrods9781]

@@SniderTron3000 plaster of paris or fiberglass on a roached block? I've thought about trying to make a mold off of one in that fashion, cut it in half to remove it, then glue it back together.

[@79chevyboylopez64]

17:20 Xxx mature audience only

[@2strokeboys191]

First comment ❤️