Turbo LS Fiero runs! And then won't fire back up... this car will not stop fighting me lol

[@maxxproductions7749]

Cant wait for this thing to hit the drag strip!!

[@weebeastys1]

Well I’ll be, it ain’t got no gas in it ⛽️

[@dudet9662]

well there's your problem right there, I'll be dipped.

[@Axial_Andrew]

The Fightin' Fiero and the horse barn... 🚬🐴

[@Hogiewan1]

My Camaro is on jack stands to do rear DA shocks, Caltracs, etc I’ve been saving and accumulating parts for over 2 years now. Went to London for work and got the cough cough. It’s always something but keep on going guys. That’s what we do. All the best to y’all

[@johngraves9201]

Finally put the cab back down on my 6.0 Powerstroke the other day after heads, cam, valve springs, injectors, turbo and studs only for the trans to shit its actual guts out on the test drive. Never got above 1500 rpm, never had a trans issue before. Sometimes life just fucks you like that 😪

[@Brock_Landers]

Hell to the yeah bruh! Lemme hear that LS turbo swapped Fiero kick some ass!

[@bigdaddyroadwarrior2976]

Good luck I would love to see the fiero up and running, it’s kind of a dream car build from the standpoint of used to own a 1986 four cylinder. Always was weak pulling out in traffic

[@nathanielriedy1975]

Arkansas here, my 06 serria turbo truck needs a new good home 😂awesome video man been waiting for this video

[@SniderTron3000]

Sounds like you should trade for a Fiero lol

[@nathanielriedy1975]

@SniderTron3000 im having a Goldie hawn moment man I truly know how you felt about Goldie at the end

[@SniderTron3000]

@nathanielriedy1975 lol it was frustrating as hell. But I do wish I never got rid of it

[@nathanielriedy1975]

@SniderTron3000 yeah that's why I've yet to do the same and I catch myself going back to your old videos of the truck to regain motivation to start working on it again, it's basically done just transmission tuning issues 4l80e swapped, can you get it back?

[@SniderTron3000]

@nathanielriedy1975 Nah, the dude who has it now has done a bunch of shit to it and the last time it was up for sale it was like $12k. Way too rich for me lol

[@RedEyedPatriot]

Ewww yeah, she's comin back out. Tough luck Brother. Stay Grindin Man.

[@mrmister7526]

Two things: 1) Those ACES efi systems seem to good to be true when it comes to pricing. It's half of what a terminator X is and those aren't known for the greatest build quality. 2) those Amazon harnesses are amazing. 5 mintues with a meter to ring everything out for verification and youre golden. I've got 4 vehicles running on them currently. Thanks for posting brotha.

[@BDauto86]

Dude that's how my whole year has been...it fuckin sucks lol. Things are finally sorta going ok but damn we struggled with alot of shit. I planned on being atleast 2 projects ahead of what I am right now so I'm scrambling before winter hits.

[@JuiceMonkey660]

I just had the same issue with my Trans Am after fighting it replacing every sensor, harnesses, ECU’s, coils etc., It ended up being the spark plugs, which were brand new and only had 10 minutes of runtime.

[@sevenity2677]

I wish I could help you and help you organize the shop and tools. Sorry OCD acting up. Fiero sounding great and can’t wait to see y’all Cruz it!🤘🏼🤘🏼👊🏼

[@onebadbowtie86]

have you tried swapping the crank sensor on the motor?

[@shanewright6958]

Another great video 👍👍

[@c0c0asauce]

I am a fan of megasquirt. Put it on anything. Any thing with a tooth logger would be useful here.

[@SniderTron3000]

I got a buddy who has megasquirt on a couple cars and he really likes it. I'm dumb though, so that's why I like Holley lol

[@Dan-x7r]

You will get it bro ... Sometimes we gotta walk away and not think about it. Then it comes to you oh shit it was this or that . But i know a 100 % you will get it . And i hope it rups which it should .

[@KarKamp]

What it do baby!!

[@w41duvernay]

THERE are LS ecm set ups for sell by companies.

[@funfun8095]

For SALE. Learn English. Sell is a verb. SMH

[@LynnTwinCustoms513]

You win some you lose some. I took an L this past Saturday. On my GMC yukon I figured hey before the winter weather I better replace the oil pump o ring since it has been having oil pressure issues indicating that o ring is bad because hey Ls motors never go bad 😂 welp let’s just say motor left the chat on my test drive

[@SniderTron3000]

That is such a bummer, man

[@LynnTwinCustoms513]

@@SniderTron3000 For sure but the wise words of Joe Dirt “just gotta keep on keepin on” haha I’m going to pull it and assess the damage. Hope that Fiero starts treating you better soon!

[@ronaldrey8474]

Is there 2 different sizes on rector wheel ? Just a guess.

[@funfun8095]

Reluctor. Yes LS has a 24 or 58.

[@Z28Batman]

Term x kits are damn expensive. Purchased a term x max 24x setup for my 70 Nova last fall. At 10% off it still ran me about $2400 Canadian. Brutal!!

[@andrewcadorette5643]

I have waited for years! Set a record! When can she drive it? I hope you are well!😊

[@Jenkins137]

What kind of fuel rails and mounts and injectors did you run on this ? Currently have a mid rise cathedral single plane intake manifold I’m gonna run on mine if I can find out the beat budget way to run the fuel system on it ?

[@jagunn1972]

Probably a corrupt tune flash. Try and refresh it and see if it takes!

[@thatprojectgarage_2570]

Camshaft and map plugs switched?

[@Travis7109]

I did a full junkyard LS rebuild and upgrade. Spent about $3800 in parts. I throw it in and the bitch leaks oil.

[@mechanicvet8539]

I know im behind on the curve here, do you have any carb stuff to put on it temporarily, get it running and make sure the engine is ok, then go back to efi?

[@Hackjob-Extraordinaire]

Link to the cheapo wiring harness please?

[@grandmasmalibu]

I get the tuning issues, but that motor sounds BAD. Like something mechanically broke. Did you hear how uneven it sounded cranking on the starter after it died?

[@SniderTron3000]

Oh trust me, I hear it lol you're hearing it through a camera and muffled audio. I'm getting the full enchilada lol why do you think I didn't want to post this video? Haha

[@michaelstarr5861]

It's going to SLAY anything that a normal person could purchase for less than $60,000.

[@bobbo7580]

What crank sensor are you running

[@matthewjohnston2366]

I haven’t finished the vid yet. However, I will say….. check every single wire in that cheap harness. I chased my tail for two months…. They played musical chairs with the 5v reference wires….. all of the major sensors were in the wrong spots. Weirdest part in that it would run about like yours and then sky rocket rpm wise. Check the harness sir. It’s worth it

[@kelvinthomas8276]

So the harness on amazon for $73 work on any LS engine?

[@SniderTron3000]

Only drive by wire, 24x/1x engines. They pretty much all come with EV1 injector plugs

[@roycervantes1341]

Good evening,,,,,,, Yeee Yeee 😊

[@KarKamp]

1st off anyone that hears that engine knows exactly what it is😊 (rod) 😂because that lil idle & cranking was enough. If a’guy puts a tune on an ecu then changes the tune or reflashes another tune & has issues, can you not reapply the old tune to see if it works, if it don’t then I’d say ecu issue!! But that rod be banggin my’guy!!

[@SniderTron3000]

It absolutely could be a rod. I'm not ruling that out at all lol just wishful thinking. The RX7 made a very similar noise that turned out to be a collapsed oil filter and it was some lifters collapsed. Once it ran with proper oil pressure it went away so I'm using all 3 of my genie wishes to wish thats what this is lol 🫣 and I did flash the old tune in, didn't change anything

[@KarKamp]

@@SniderTron3000 damm man that ecu stuff is a pain in the ass, I did the jackpot deal & couldn’t get it to fully fire off switched over my Holley to get he to hit off the switchback but come to realize wrong crank!!🤣🤣

[@SniderTron3000]

Cars suck lol

[@bobbo7580]

​@SniderTron3000 I ran into the same issue using a duralast crank sensor in my bosses tow truck, it needed a washer 'shim' truck ran fine after that

[@funfun8095]

Audio, for me, sounds higher pitch than a rod. Like rocker or something.

[@captaingreatvalue]

Might have been easier throwing a carb and distributor skipping all the wiring I hate any wiring jobs it’s too hard to tell what’s wrong lol

[@wadebonhomme2142]

So close!

[@Jake-zt3bk]

You should push it outside. Give it a good hand wash and sweet talk it alittle bit about how a pontiac is related to a chevy and how jesus drove a chevy. Put some nice tire shine on it. Make it feel good and that will prolly fix all the issues. Get connected spiritually but make sure you keep a sledge hammer close.

[@coreyfuchs730]

Knock.knock😂

[@realshidd3062]

👊🏾💪🏾🔥🔥🔥🔥🔥

[@dougj.8288]

So what you’re sayin is, the ACES EFI isn’t worth the new price? Probably better to buy used but that person is probably selling it for a reason? 😂

[@canz8tercustumz]

The story of my life, I’ll get all of the “hard stuff” done and something as simple as a 12v wire on 1 pin holds me up for several weeks.

[@401cam8]

Aces needs to get their software and hardware working right, we need companies like them to rival holley to bring these ridiculous prices down. You use to be able to get a Terminator x max for 1k wtf happened? Now it's 1600.

[@trentdawg2832]

Biden

[@ryurc3033]

Its really hard anymore, because even the new parts are questionable.

[@funfun8095]

NEW just stands for, Never Ever Worked

[@KingZmex]

Dude I was about to buy acces Damn!!

[@ronaldrey8474]

ACES has failed several KZbinrs. Casey Custom cars tried twice after sending unit back and replaced one failed too. Imagine after heat cycles and 1yr ... Won't WORK EITHER

[@funfun8095]

Geesh. I guess there's a reason Josh got this used.

[@rachalhollier5679]

send the ace's unit back and have them fix it! that's bull s|€+! It's there problem not yours.

[@79huddy]

He got it used dont know if they have a transferable warranty

[@funfun8095]

​@@79huddyFact

[@rachalhollier5679]

@@79huddy I forgot,he did say that too. Well that sux, I would buy the same unit and,well,you know,lol.

[@artysmotorsports]

Junk it dude...

[@Stevesbe]

Its not a fiasco for nothing

[@brando7655]

I think it’s time to pull the motor out and just sell that thing as a roller