Reviving the 1982 Honda CX500 Turbo - Part 2: Deep Cleaning and Fuel Challenges

Welcome back to Motorcycle Rewind! In our second episode dedicated to the revival of the 1982 Honda CX500 Turbo, we're diving deeper into the restoration process.
We start by giving the wheels and engine the attention they deserve with a thorough cleaning, scrubbing away years of grime and neglect. Watch as we bring back the shine and reveal the hidden beauty of this classic bike.
Next, we tackle the fuel tank, which has been sitting with 25-year-old fuel. It's time to drain out the ancient gas and see what we're dealing with inside. Spoiler alert: it's not pretty, but it's all part of the adventure!
Finally, we test the original fuel pump to determine if it's still up to the task or if it needs to be replaced. Will the pump hold up after all these years, or will we be hunting for a new one? Tune in to find out!
Join us on this journey of revival, and don't forget to like, comment, and subscribe to follow the progress of the CX500 Turbo and all our other vintage motorcycle projects.
Reviving a Rare 1982 Honda CX500 Turbo After 25 Years! #motorcyclerewind #vintagemotorcycles #CX500turbo
🛠️ Subscribe to Motorcycle Rewind for more adventures, tips, and stories from the garage. Share your thoughts and questions in the comments below-we love hearing from our community of motorcycle enthusiasts and DIY heroes.
⬇️Get your Motorcycle Rewind Gear Here ⬇️
be40a4-4.myshopify.com
Check out our great sponsors:
Rabaconda Street Tire Changer
rabaconda.com
Website link: tinyurl.com/Mukkpetninja
Exclusive discount code: EM80
VEVOR Tough Tools, Half Price
s.vevor.com/bfQUyH
5% off code for your viewers: DISCOUNT23 (Valid for all the items)
The DigiSync
tinyurl.com/thedigisync
Use Promo Code "MotorcycleRewind" for $10 off your purchase
Buy ANPUDS Torque Wrench
tinyurl.com/33nf8kh2
F40 Jump Pack
www.jfegwo.com/products/f40-4...
Use Coupon Code - REWIND and save 10%
Join us on our social media channels:
Facebook: motorcyclerewind
Instagram: motorcyclerewind
Sponsorships opportunities: If you would like to sponsor our channel on contact us at [e-mail] and put the word "Sponsorship" in the subject line.
All music by Bensound
For Aftermarket Parts
www.speedmotoco.com
For OEM parts for your Vintage Motorcycle
www.cmsnl.com

[@benspeedschannel888]

Definitely with you on the cleaning first routine 👍

[@ericmanuel3587]

Why work on a dirty motorcycle when you don’t have too!!!😂 Thanks for watching.

[@kalaharimine]

You find a lot issues as you clean.

[@davidinghram2494]

In 1982 I bought a new CB900F, and one of my riding buddies bought one of these Turbo`s. They were about the same, as far as speed goes. I ended up putting about 40K on the 900, and of all the motorcycles I`ve owned (50) or so, I always considered it to be the best. I had an 81 CX500 Custom, which I traded in on the 900. Honda should have never quit making this engine. I`m going to enjoy this series.

[@motorcyclerewind]

I am looking forward to getting this guy running and riding. Fuel pump is on its way. Thanks for watching.

[@nigelcox7477]

@@motorcyclerewind- not going to attempt a rebuild of the fuel pump?

[@motohomeless9168]

Yes!!!!!! Every day is Turbo day! Looking good!

[@motorcyclerewind]

Happy Turbo Day!!!

[@tcvan-nm2fx]

Can't wait to see you driving her down the road.

[@motorcyclerewind]

Me too!!! This project has been so fun. Reminds a lot of the GPz last year.

[@kalaharimine]

Tank and panels need to come off for a deep clean, protects them from damage too. Very stylish bike, nice project. GL👍🏻

[@motorcyclerewind]

That's step 3 of the cleaning process. Cleaning under that tank and seat is next. Thanks for watching.

[@sjv6598]

I always clean before working. It makes it much much easier to see what you’re doing. That a great bike and is in fantastic condition considering it’s 40 odd years old.

[@motorcyclerewind]

Couldn't agree more! Everyday this bike gets better and better. It's like the GPZ experience all over again. Having a blast!

[@bobberguy1]

I enjoy watching you knock the barnacles off. Amazing what a little TLC will do for a bike.

[@motorcyclerewind]

Glad you enjoy it! I have a feeling this one is going to turn out really good with few parts and lots of elbow grease. Thanks for watching.

[@nickq204]

The wheels look great now! The CX turbo bikes have that retro future look in spades. I love the color scheme on this bike with the yellow and black trim. I love watching these on KZbin, because I don’t think I’ve ever seen one in the wild, or at least not in the last 25-30 years.

[@motorcyclerewind]

These wheels are awesome. This motorcycle has been so much fun. Can’t wait till the fuel pump arrives.

[@user-hu4jo2bw4o]

Hi from Christchurch New Zealand I always spend the time to clean the bike I am working on Cheers Glenn.

[@motorcyclerewind]

It is very rewarding. Thanks for watching from Christchurch.

[@Turleyswheels]

That bike looks amazing for the year they look so cool can’t wait till it’s done they sound fantastic I’ve just got my self a ktm duke 390 and I’m 62 and I love it smiles per miles 100 easy ❤

[@motorcyclerewind]

It is cleaning up so good. Hoping I can bring the paint around.

[@kickingitwithkeri]

Bone dry 😂 Great video. Love the beginning with the sweet babies 💗

[@motorcyclerewind]

Turbo noises.

[@stevefletcher2334]

gotta have a clean bike! My 84 CB650SC's motor looked very similar to your CX500's...same faded paint...I hit it with S100 engine brightener and it magically looked all gloss black and new again! Granted, it's just a band aid...but it lasted quite a few months before starting to fade again. It sure beats repainting the motor!

[@motorcyclerewind]

I am going to look for some of that. Thanks for the tip and thanks for watching.

[@michaelmccann4706]

I like this bike Eric, I'm guessing it's a keeper.

[@motorcyclerewind]

This one is going round have a place next to the GPz for a while. Thanks for watching.

[@vincentbyron7086]

Greetings from Dublin Ireland. There is no substitute for elbow grease.

[@motorcyclerewind]

I should order it by the barrel. May be a little effort but it is so rewarding. Thanks for watching

[@michaelmccann4706]

Jayzus, another Paddy watching 👍😁

[@rsc68er]

They are a lovely bike. I think you will enjoy riding this bike more than the GPZ. And Eric I'm happy for some Turbo bike work everyday if you don't mind😅

[@motorcyclerewind]

Turbo day is everyday. These are such cool bikes. Thanks for watching.

[@dextergleason9421]

Mothers wheel or metal polish will take more off those wheels. Looking great.

[@motorcyclerewind]

I thought about using some time of metal polish. Was concern about the finish coming off the wheel. Seeing how its faded so much in the rear. I can do a test spot on the rear. Can't make it worse! Thanks for the heads up. Now to go shopping.

[@waynebuzzell2483]

Armor All will take away the oxidation in the black engine parts and make it look new. It lasts a fair amount of time after application too. Good luck.

[@motorcyclerewind]

I accidentally discovered that while cleaning this bike. Sprayed it with the tire foam, let it sit till all the foam dissipated. Then blew it off with the air compressor. Looked really good. Thanks for watching.

[@MarkYevick]

Great video! Where can a fella find one of those rollers that you put the front wheel on to clean it

[@motorcyclerewind]

I got mine from Harbor Freight. Here is an Amazon link to same one. amzn.to/3VNKCde

[@billhuff7130]

I've got a 6 cylinder Kawasaki ( future project ) has a electric fuel pump didn't work. I put carb clean in the inlet and outlet to clean things out.( repeatedly ) reversed polarity back and forth and got the fuel pump to work.

[@motorcyclerewind]

This one is in the Ultrasonic cleaner. Doesn’t hurt to try to free it up. I also ordered a new one. Thanks for watching.

[@billhuff7130]

I love watching your channel. What happened to the little honda junk yard scooters. I need to figure out how to send some pictures of my bikes. 83 GPZ is 1...

[@daveco1270]

17:23 Whats on your upper lip in this shot? It kind of looks like you were sucking on the exhaust end of a muffler. : ) It's funny the places grease and grime will end up when you're working in the garage. That's a cool bike. Normally the 80's stuff doesn't do it for me (with all the plastics and the squares) but I'm starting to appreciate those bikes more.

[@motorcyclerewind]

LOL. Was wondering of anyone would catch it. I blew into the tank to speed the draining. Did not realize it got on my face! I was just like you with regards, to these early eighties bikes. Have found an appreciation for them. Thanks for watching.

[@michielbergman6202]

@@motorcyclerewind Hilarious; we all caught it.. I even realized what you did without reading your comment here. Great stuff, very funny too.