REVOX G36 Operating Demo.

REVOX G36. Demonstration of controls.
Recording, playback, fast winding, spool holders.

[@pcallas66]

Nice machine! Thank you for sharing.

[@abeleballestri612]

Very nice and practical demonstration how to Brecon do from a g36 stereo recorder,indicating all the necessary useful information.thanks a lot.

[@abeleballestri612]

How to record from a G36 revox recorder.thank you. Sorry for the typing mistakes.

[@lesaventuresdejolemagneto4461]

Hello ! good morning from France !

[@robertgilmore5496]

Hi Nick, Just wondering what tape you found to work well with the G36? Did you ever try any of the new offerings from RMGI? Such as the SM900?

[@KurtDPalmer]

Great Video! I have the f36. How do you connect your revox to your amplifier? Cathode follower outputs?

[@tough213]

this is a great unit thank you for sharing it with us all I had noticed that the tape counter was not moving is that a feathure you can disengage it or was it stuck . thank you again and happy and healthy new year

[@nickadams5411]

Hi The tape counter broke, which is very common. The plastic fingers break off. I did manage to find another working one. The belt was still ok. Keep rocking and reeling. nick

[@tough213]

ok but this is such an amazing unit and I know from experience that some reel to reels are very noisey and some are silent like this one. enjoy it and thank you for sharing this with us and happy and healthy new year

[@GBscottieUK]

The drop in volume is the two channels cancelling each other out a little.

[@eladiolorenzosuarez5361]

Bonito Me gustan mas las Radios

[@musicsweetera353]

Hello. Thank you for this video. Recently i've go G36 and wondering if i can just pass the signal through the G36 electronic without tape? I was trying to do it yesterday, but no luck. I have output signal from G36 only in recording mode. When the reels are not spinning there is no signal from Cathode Follower Output (A). Thank you for the input

[@nickadams5411]

Hi The player was not designed to do that, which I agree is annoying when trying to adjust the input , before recording, and it does not have a Pause control.

[@dubdoodle7191]

Do the knock off Revox NAB hub Adapters on ebay work the same way as yours ? Are yours Revox or knock offs ?

[@Manu_Nayar]

Hello there. In your opinion which machine sounds the best in Revox B77 A77 or this one ? I’m looking for one out of 3 thanks Manu

[@nickadams5411]

Hi Manu The later ones are better. The G36 is very good, but requires a lot of maintenace if used for hifi music. The heads do wear, and the tubes (valves) also can need replacing . The circuit design is better in the later models. All the best Nick

[@Manu_Nayar]

Thanks Nick

[@Manu_Nayar]

Nick Adams I will look for A77 2 Track. Less than 300€ budget. Any thanks 🙏🏽

[@ryanstark2350]

It depends what you mean by "sounds tbe best". The G36 has fantastic valve character to it so very good as a music production effect. It also has spectacularly good microphone preamps. Some of the best mic preamps ever made. However, unfortunately you can't seem to send a monitor of the mic inputs out of the machine without taping.

[@ryanstark2350]

@@Umiliani You need a phono type plug on one end of the cable or XLR to phono adapter. If the mic has phantom power you will also need a separate unit to supply that but those are not expensive. I think Behinger make them. I have a couple of AKG 451 EB mics from the 70s. Acoustic guitar recorded onto the G36 with those is spectacularly good. If only you could just use the mic preamps but unfortunately you can't route that out without going to tape.

[@JULIAN8845]

trouble with these there are no secondary fuses on the power supply there is no bias adjfor lower speed if you switch the input selectors to track transfere and open the level controlsthe vu meters do work on playback

[@nickadams5411]

Hi David. Thanks for the information. I am not a great fan of these machines. They do have the valve charm and heavy build, but they do age badly, especially the heads which wear out, and the adjustments, as you say, leave a lot to be desired.

[@akaigx9713]

Подари мне(

[@exentralive4998]

Shit…

[@peterscheidegger6077]

REVOX Music g

[@jelphredway3343]

9

[@ferencbalint3233]

Jelph Redwa

[@KurtDPalmer]

Great Video! I have the f36. How do you connect your revox to your amplifier? Cathode follower outputs?

[@nickadams5411]

Hi Oliver Yes the cathode follower outputs are low impedance output, so ideal to drive connecting cables.