I prefer applying lemon grass tea infused cucumber slices to the face shield, almond and coconut paste to the shell and then do a nice Jamaican Blue coffee cleanse to the internal padding. That takes years off of your helmet and makes it feel like something newer and fresher is sitting on your face.
@RevZilla6 жыл бұрын
How invigorating! -DrewZilla
@jlewis73566 жыл бұрын
LOL. Very clever!
@earlmiranda73106 жыл бұрын
Doing this... I've been stressed lately and its showing...
@jasonmilligan97825 жыл бұрын
Diogenes415 Baaaaahhaaaaaaaa
@nevTk-oe9ud4 жыл бұрын
Imao A tree hugger lol
@jamesohsum4 жыл бұрын
It can be done by all the tools lying around your house. Now take out the air compressor...
@ronbradshaw1522 Жыл бұрын
😂
@dolcielal483410 ай бұрын
🤣
@jlewis73566 жыл бұрын
Someone below said it best: "As experienced riders we often lose sight of sharing that experience with riders who are relatively new". Even though this is dead simple, we all have a first time and want to get it right. Your video(s) really help so pay no mind to the naysayers! A few times you mentioned changing the pin-lock. My helmet is only a year old (HJC IS Max 2) and there doesn't seem to be any reason to worry about the pin-lock yet. How can I tell if it needs to be replaced?
@RevZilla6 жыл бұрын
Once the silicone seal around the Pinlock starts to degrade or the Pinlock insert has a harder time resisting fogging, then it's time to replace it. -DrewZilla
@emanueladamache70346 жыл бұрын
Rule for microfiber towel? Always remove tag, it can scratch. Another rule? Never let it touch the ground or pick up dust, can also scratch.
@omarmontana19694 жыл бұрын
hahaha thats from chrisfix
@TheMiojox5 жыл бұрын
I keep my air compressor in my apartment between the chainsaw and the piano.
@RevZilla5 жыл бұрын
Good place for it! ;-)
@bigfranchise5 жыл бұрын
I keep mine between my Dutch oven and spiral staircase
@Murph9454 жыл бұрын
Good idea, close to the bike makes sense.
@kierenmoore32364 жыл бұрын
You should get one ... and learn to change your own tyres ...
@simaolopes21124 жыл бұрын
Ahhaha, pure gold!
@vidarhermansen7 жыл бұрын
dammit, shaved my face yesterday and didn't even think about that i need a beard for washing my helmet...
@trydenrocks5 жыл бұрын
Pubic hair would suffice..
@rogaldorn6053 жыл бұрын
@@trydenrocks bruh
@vinm36307 жыл бұрын
You need to caulk the backsplash on your sink between the countertop and backsplash.
@mowcowbell7 жыл бұрын
I use a microfiber cloth and Meguiars Ultimate Quik Wax. It works great for cleaning off the exterior of the helmet, while leaving a nice wax coating which will help the surface bead up water and keep the helmet easy to clean after use.
@BN19608 жыл бұрын
Great video Spurge. As experienced riders we often lose sight of sharing that experience with riders who are relatively new to biking and vids like this, simple as it is, are an excellent way to share the love. :-)
@mutanic826 жыл бұрын
Nice comment here, unlike some other experienced riders, you take it positively. Salute!
@teoyamahar16397 жыл бұрын
I take a shower with mine
@RevZilla7 жыл бұрын
TMI? -DrewZilla
@DrTranofEvil5 жыл бұрын
I travelled across washington, Idaho and Montana last spring and I was seriously coated in bug guts. Stopped at a rather nice hotel and ended up climbing in the shower in full gear to rinse most of it off. I’ll never forget the smell (I cleaned up the bathroom after, I didn’t want to be ‘that guy’), but it was nice not smelling like a bait shop starting the next morning. X-/
@NorthFloridaMan6 жыл бұрын
To clean my vents I just go full speed
@ajp72444 жыл бұрын
I like your style
@DonGH2974 жыл бұрын
That's the spirit m8
@gerben.f4 жыл бұрын
No erosion like wind erosion 💪
@Chu_Strums7 жыл бұрын
I didn't know Nick Miller from New Girl was into motorcycles. Great vid!
@Ali-yh8dl7 жыл бұрын
EXACTLY i was hoping to see this comment
@VenomGaming09186 жыл бұрын
That's hilarious
@tejastyagi2578 жыл бұрын
+Revzilla Thank you so much i am a yong rider with less experience and u people really help out
@SpurgeonDunbar8 жыл бұрын
Welcome to the wild world of motorcycles!
@contact00188 жыл бұрын
be careful of shit drivers and fuckers who tailgate
@muhammadsaad76386 жыл бұрын
Dont waste ur time watching this. All u have to do is clean off the helmet with warm water and wash the inner pads. Thats literally it
@not-a-w33b5 жыл бұрын
@ObamaReally Suucks stfu
@lemon55015 жыл бұрын
ObamaReally Suucks wow you really hate people of other races huh? Did u join the KKK already?
@rcpmac8 жыл бұрын
I put mine in the dishwasher. Then I put it in a laundry bag and throw it in the clothes dryer on medium
@Ali-yh8dl7 жыл бұрын
do you use normal dish soap with that ? :P
@Hondadctrider8 жыл бұрын
I just wash the internals of my helmet in the washing machine, works a treat and they smell lovely.
@miguelpaneda16072 жыл бұрын
i always do that with my Spyder...but when i have this Evo DX7 i now doing this process😁 but those internals doesnt use any fabric conditioner, i just use light powdered soap then rinse it in water with white vinegar...works well on me,
@FilmyReact2 жыл бұрын
Thanks, I just cleaned my helmet after 1 year plus. 🙏🏽
@Sujeesh_Bhosri2 жыл бұрын
Most indians do not clean their helmet
@broderp4 жыл бұрын
Good info but a lot of work. I simply keep the outside clean weekly and every few months I polish it. As far as the visor, glasses cleaner works well (has not damaged it yet) or just soapy water with dish liquid. The interior padding, I just take it out and throw it in the washing machine along with my jacket and wash in cold water, delicate cycle then air dry. Both the jacket and helmet liner come out great every time. Right or wrong, its easy and quick.
@planetphatness2 жыл бұрын
That's what I use, windex and a wash rag. Give it a good wipe down after a ride. Probably not the best long-term but if I had a $500 helmet I probably would be more careful with it. The ones I use are between $150 and $200.
@LPcasper7 жыл бұрын
Same dirty water to wash the face shield?!... I don't think so...
@kevinwatters86317 жыл бұрын
Yeah, I would start with the face shield while the water is cleanest.
@usernamemykel6 жыл бұрын
Agreed.
@katrinanordyke73595 жыл бұрын
I would just run that under warm water, don’t even use a rag
@HalfdeadRider4 жыл бұрын
@@katrinanordyke7359 I don't even use water, no need.
@katrinanordyke73594 жыл бұрын
@@HalfdeadRider Spit shine
@Ladosligese6 жыл бұрын
microfiber towels are 99,9 % risk free of scratching .. however ..if rubbed over a dirty helmet it WILL scratch .. it will be like using sandpaper or scuffpads on your helmet. just a note for those testing this ^.^.. its ofc realy obvious , just making sure haha nice vid ofc as allways
@huzefaamtabha63824 жыл бұрын
You are not supposed to use a microfibre towel on the facial visor.
@HarshSharma-ve3vw6 жыл бұрын
He made it sound really complicated when it is really simple.
@MasterzOfHardcore5 жыл бұрын
If you think this video is complicated, i'm unsure if you should be riding a bike all together.
@eshan3094 жыл бұрын
@@MasterzOfHardcore he said he made it "sound complicated" when its not. he didnt say its complicated.
@HalfdeadRider4 жыл бұрын
I thought this was the only way, so I robbed a few banks and got my helmet a "gararge" and an air compressor.
@upalbanget5 жыл бұрын
You completely forgot to clean the strap,it picks up sweat too
@ericspartacus46794 жыл бұрын
Right on! The metal lock of my helmet strap is also all rusty and I don't know how to clean/remove/replace it :(
@observingrogue76528 жыл бұрын
If I always wear a balaclava, do I wait twice as long to clean the internals? Like clean internals once, for every 2 cleanings of the outside?
@RevZilla8 жыл бұрын
That sounds about right. -DrewZilla
@adzeflores9373 Жыл бұрын
Tutorials like this, I highly appreciate. Please keep making more. Godbless your team.
@martins71947 жыл бұрын
Good video, although I would get clean water and cloth for the visor. :)
@MrDuckie2286 жыл бұрын
Im watching this while i dont even own a motorcycle
@bigfranchise5 жыл бұрын
MrDuckie228 same! I’m getting a Yamaha Bolt as my first bike this year and figured I’d start somewhere
@yt_censorship_sucks5 жыл бұрын
@@bigfranchise Welcome to the world of motorcycles! Watch out for the idiots out there. Ride safe and ride like no one can see you.
@razorblatter4 жыл бұрын
If I may be so bolt as to give you a suggestion: watch window cleaning videos. It's very zen and will blow your mind!
@motobulgaria26494 жыл бұрын
😂😂😂
@justinjburk5 жыл бұрын
You should rinse your face shield in water before wiping it down. And you definitely shouldn't use dirty rag-water to clean it off...
@MrRobschnieder6 жыл бұрын
I dont know about you guys but I wipe down my visor everyday. I cant stand seeing spots on the visor while I'm riding.
@luka_-ol1bj4 жыл бұрын
same thing i cant stand either i feel anoyed by fingerprints and bugs 😂i got u man
@Minecraftowns695 жыл бұрын
Lmao I just use water and a paper towel it works fine 😂
@TheMrbazooka4 жыл бұрын
Haha he picks these particular cleaning equipment because they are easily accessible for us at home, and then whips out an air compressor. I checked under my kitchen sink, I couldn't find one haha
@dabike2 жыл бұрын
I do hate removing the internals on my Arai Signet helmet. For some reason, I struggle getting everything reinstalled correctly. Maybe just need more practice.
@seandonnelly205 Жыл бұрын
They can be a little tricky, but once you get the hang of it you will find you can remove and re-install them with ease. DO take the covers off of Arai cheek pads though. They have an EPS-type styrofoam that you don't want to wash along with the cover.
@DrTranofEvil5 жыл бұрын
Ironic that this popped up in my email tonight. I commute in the PNW and between the rain and road-grease, my white helmet was more gray/black so I figured I’d wipe it down before I started my 35 mile ride home (before I saw this). I found out my shell was chipped and I had a crack I thought was just grime... it went for its last ride tonight. I already bought a new helmet (part of the reason Revzilla sent me the email), but I guess that was good timing (and a good reason to clean your lid more often than I have been).
@mick50545 жыл бұрын
Warm pressure cleaner on low psi works fine too, so much work here 😜
@miguelpaneda16072 жыл бұрын
how? without disassembling?
@HalfdeadRider4 жыл бұрын
I guess I better win the lottery and buy a "gararge" and an air compressor for my helmet, fuck that I'm getting the household polish out again 😎👍
@yycabj8 жыл бұрын
should you wash the faceshild first since the water still clean .
@RevZilla8 жыл бұрын
After you drape the wet cloth over the helmet for a few minutes, you can certainly wash the face shield first if you so choose. -DrewZilla
@ttss57268 жыл бұрын
plexus hands down
@gnesmond4 жыл бұрын
I also use some diluted all purpose cleaner to clean the outside of the helmet. And tint safe window cleaner (I recommend stoners invisible glass.)
@dapiiimyannn16394 жыл бұрын
Doing this while I am in lock down
@myveryownchannel4 жыл бұрын
Haha, same, washed all the moto gear
@DJMotoVlogs8 жыл бұрын
I like the repost with the trip to the Kitchen. Im gonna clean the padding right now.
@ALLDM44 жыл бұрын
Any tips for the chin strap?
@planetphatness2 жыл бұрын
I use windex and a wash rag. Probably not the best but my helmets still look good.
@supercomp7078 Жыл бұрын
I would have used fresh warm water for the visor, not water with dirt already in it. but good info all the same.
@NikhilLalwaniMulundkarNikhil7 жыл бұрын
1st time I washed My Helmet And all because of ur VideoThat was Quite Cool
@richardsmith73794 жыл бұрын
I throw my liner in with the laundry use auto glass cleaner for my visor and I usually use spray wax to give my helmet a shiny finish.
@thatguyoverthere80977 жыл бұрын
4:30 should've started reading the script for a shamwow commercial
@waleedbakheet46272 жыл бұрын
Microfiber tissues does the work of a sand paper (15k-20k)grid Cotton is a much better option for facial or even the highglossy furniture
@adityavikramsingh61123 жыл бұрын
Forget the helmet, the guy is 🔥
@Sujeesh_Bhosri2 жыл бұрын
You are a gae .
@esatd348 жыл бұрын
Well, all that hype about using two buckets for dirt to stay down and away from the towel. This video needed it so badly. Use TWO buckets!
@Swisha90s3 ай бұрын
Is this that dude Nick on good girl? Anyways. I have a rpha 70 and the sunshield is fuxked,most likely from sand/ dust gathering inside the tiny compartment where its laying. So each time ive flipped it up and down, more scratches came. Compressor to clean there also?
@Aldrich245 жыл бұрын
Paps this is a great help specially for me as a rookie rider. Hope to have one of your amazing helmets. Godbless and Ride safe always. Best regards The Philippines.🇵🇭🇵🇭🇵🇭
@jimmorrison3063 жыл бұрын
Washed the liner of my G-max FF49, and it never fit right again. Bought a new liner, and the helmet fit like new. I figure once a year is well worth it, assuming the liner isn’t too expensive.
@drummin93776 жыл бұрын
I boughy the hjc rpha st zaytun.. The manuelbsays yo use compressed air from a can to clean vents.
@Ben-lu2wo7 жыл бұрын
I'm glad to see the Sham-Wow guy is finding work again.
@RevZilla7 жыл бұрын
Are you gettin' this camera guy?! -DrewZilla
@bigfranchise5 жыл бұрын
My dentist recommended a Colgate toothbrush, instead of an Oral-b. Will that work?
@ducatislag99105 жыл бұрын
But only 9 out of 10 recommend brushing
@deepannadar81943 жыл бұрын
Okay !!! All good !!!! What about the straps??
@RevZilla3 жыл бұрын
The straps can also be wiped down with a gentle cleaner like soap and water, then air dried. Since they are usually a tougher material they don't absorb as much sweat and dirt as the soft inner linings. I hope that helps! -Zack
@superfastmonkeysim52002 жыл бұрын
Reckon that helmet was dusty. But brand new. Easy clean
@dale-fi1fi6 жыл бұрын
Can get that dry shampoo aswell for inside cleaning
@monstroPR19695 жыл бұрын
Revzilla is just the best!!!
@AevenSong5 жыл бұрын
Whats the helmet he is using for the demo? Looks pretty cool
@RevZilla5 жыл бұрын
It's an older Nexx X-Wild helmet that's no longer available in that graphic. -DrewZilla
@ydiadi_ Жыл бұрын
Whats that black box to keep the helmet into
@gsabella46 жыл бұрын
I notice I'm getting a rainbow/ripple effect on my smoke shield after cleaning. I've been cleaning with warm water on a microfiber, followed with plexus. Any ideas?
@RevZilla6 жыл бұрын
It could be the Plexus, but it's hard to know for sure. -DrewZilla
@stuartzammit599410 ай бұрын
I've got a Bell Broozer and it's interior liner which touches the forehead is non removable. Because of buildup of sweat it's getting the visor all smudged up whenever I open/close it. Any advice on how I can clean this non removable padding? I ended up not using the helmet anymore and it was my favourite one. TIA
@coobye4 жыл бұрын
Clean your face shield before your helmet or use a fresh microfibre rag and clean water so as to avoid scratching your visor with dirt that might be in the water you just used to clean your helmet with.
@mortenbakke28107 жыл бұрын
I'd let the visor sit in a warm water basin on its own:)
@mccglastron19723 жыл бұрын
Compressed air and baby shampoo... everyone has those, lol.... I like Revzilla videos, just saying I haven't had baby shampoo since my boy was a baby long time ago. That's not a big deal. I just bought a new Shoei helmet from Revzilla, which got delayed from early March to early June (SUCKS!). My last 2 helmets, have accidentally slipped out of my hand and dropped on concrete scratching them up within a month of buying them... Not this time, lol! I also paid an extra $100 for a special paint job... it has a US flag, so if that triggers one scum bag America hating democrat... money well spent...
@tellthemwerenotsheep2617 жыл бұрын
You said not to use any external/extra heat source to dry. Whenever i have washe gloves or even normal clothes, if you don't do this they stink. In fact they have the same smell that i'm trying to get rid of but stronger.
@edward27187 жыл бұрын
Tell them We're not sheep that's why you use shampoo
@katanaone2 жыл бұрын
Good day. How about the helmet strap?
@dbpanjari88893 жыл бұрын
Too Good 👍🏻 Thanks Boss from India
@gerben.f4 жыл бұрын
Might be a dumb question but why would you need to replace a pinlock with a new pinlock?
@mimimmimmimim Жыл бұрын
I love how repeatedly mentioned the "the new pinlock insert"...
@dallasdandy62763 жыл бұрын
What's the alternative if you don't have a compressor? Would an electronic duster work?
@chxppa97312 жыл бұрын
Nice video got me a icon grilzz helmet
@birdie0682 жыл бұрын
thanks for the upload, you have been a help
@arunkumar-yj4gn3 жыл бұрын
Hi I got accident and my agv k1 visor got lines of scratches I want to remove it pls mention any solution
@MiloPerrotti3 жыл бұрын
Doesn't smashing the foam break it down making for a looser fit?
@takeru513 жыл бұрын
What about the nose guard
@chriiiiii10612 жыл бұрын
I had to watch this video three times because I couldn't unhear "just use some warm wohter"
@miguelpaneda16072 жыл бұрын
can i clean them pads with warm water and vinegar?
@YA-ee9zf3 жыл бұрын
Do you store it with the visor up or down I heard somewhere leaving the visor open will make the foam dry quicker any truth about that ?
@jimmorrison3063 жыл бұрын
No expert here, but if stored indoors in a dry environment it shouldn’t matter up or down. Leaving the liner wet to mold or subjecting the helmet to sunlight excessively would be hard on the materials. I like to set my helmet in front of a fan that’s blowing to help dry it on those sweaty days. I would never apply heat to it.
@alijamad33443 жыл бұрын
Do you have any tips how to get rid of the rust from your helmet lock?
@alexhamilton40845 жыл бұрын
I have a VCAN helmet in a sort of dull finish that has gone sticky. So every time I put it in the bag or on something like soft cloth, it gets some of the fibres stuck to it. I have tried all sorts on none solvents to clean it but nothing works. I'm scared of damaging it so can anyone suggest something that will clean it without damaging it?
@dollarproduction24 Жыл бұрын
Why didn't you use shampoo or soap on the external visor/external shell in order to clean it perfectly?
You could also got the rag and wipe out inside the helmet
@chipm25444 жыл бұрын
Excellent information. Thank you!
@dylanl40813 жыл бұрын
A neighbour’s dog pissed all over my helmet while I was lubing the chain. What should I do? 😔
@PaltyRides7 жыл бұрын
really great video..helped a lot
@amisanthropicman7 жыл бұрын
I got some motor oil on my helmet, and I might need something more aggressive than warm water to get it off. Suggestions? I was thinking a non-petroleum based soap like Dr. Bronner's
@RevZilla7 жыл бұрын
You could try that, but we can't make any guarantees of its effectiveness. Hope it works! -DrewZilla
@amisanthropicman7 жыл бұрын
Learn from my mistake, It removed the motor oil, but it appears to have damaged the helmet.
@pjonmarcelo6182 жыл бұрын
What's the best way to get rid of watermarks?
@bloxxor4206 жыл бұрын
REFER BACK TO YOUR OWNERS' MANUAL MAKE SURE TO REFER BACK TO YOUR OWNERS' MANUAL AND IF YOU HAVE ANY DOUBTS REFER BACK TO YOUR OWNERS MANUAL
@senthilbabu7893 жыл бұрын
muting the video and watching it makes me less panic.
@nickpal40373 жыл бұрын
Just wondering what nexx model you have there? I like that look.
@RevZilla3 жыл бұрын
That is an older ADV model, though the exact name slips my mind now. That said, it is no longer available but you can see Nexx's current ADV options here, which have a similar vibe: www.revzilla.com/nexx-xwed2-helmets www.revzilla.com/nexx-xwst2-helmets I hope that helps! -Zack
@abdelhamidkaba35606 жыл бұрын
Thank you man
@herrmahlzahn69244 жыл бұрын
Humm....... Cleaning the visor I have been using a eye-glasses cleaning spray for years. Just spray a lot on it and let it work. Dry it with a soft cloth. Finished. It's cheap, Walmart, Eyemart, Amazon etc ...... You could even put it in a pocket and clean your visor on a trip in minutes too. I thought if it is works for eye-glasses and there is no damage to the plastic-lenses, it can hardly be harmful to the face shield on my helmet.