Rewinding Techniques Part 1 (3)

Hello KZbinrs!
This video is the first part of a three part video series. It is best to watch the first video to have a better understanding on the techniques discuss rather than skipping parts as most information are given in the first part of the video.
The armature used here is already broken, it is only used for education purposes. The wire number is 26, it is specifically large in diameter for this armature so as to clearly see the wires. The number of turns is also just for an example.
The techniques shown here will help in rewinding broken armatures.
The techniques includes:
1. Single Wire Set Single Side
It is a technique in rewinding using one set of wire and a continuous connection on the commutator segments. The advantage of this is it is very simple and easy to do, the connection on the segments are strong for it only has 1 break in it. The downside is that the spin of the armature is imbalance due to a biased of wires on one side.
2. Single Wire Set Dual Sides
The technique I use in making rewinding tutorials my personal favourite. It uses a single set of wire but changing sides of the commutator and slots occasionally. The advantage of this is that it creates a balance spin and a fair amount of broken connections. The downside is that it may be confusing on the connections because of the occasional changes in sides and may lead to wrong connections.
3. Dual Sides No Commutator
This technique involves removing the commutator from the armature and later re-attaching it when the armature slots are filled with windings and then connecting the lose ends of the wires to its proper commutator segments. The Advantage of this is that it is very fast in filling out a slot with lots of turns very quickly, it is also very balance in spin. The downside of this is that every commutator connection is broken, so reinforcing the connection i.e. epoxy is a must to secure it. And connecting the lose ends can be a tremendously hard process.
4. Dual Wire Set Dual Side
This technique is a variation of the second technique Single Wire Set Dual Side. It uses two wire set instead of one, two sides of the armature slots and commutator segments are used at the same time. The advantage of this is a very balance spin and a fairly strong connections as only the starting and the end connection is broken. The downside of this is the hassle of managing two set of wires.
Of course there are other techniques out there, if you do have one please comment it down.
Link to the image gestyy.com/wBEP9a

[@juliusplaton8907]

I had to comment. Probably the best video I've seen so far explaining this.

[@JakeMarvinVillegas]

Wow, thanks!

[@satyabanasethi5832]

Thank you for explaining this. I got to know one of the core of this rewinding technique.

[@JakeMarvinVillegas]

ur welcome sir, I will update my channel in the future

[@anhthu-qw1sh]

simple is the best! thank a lot hommie!

[@JakeMarvinVillegas]

Happy to help!

[@kirundakarim2668]

Thax big bro with good idea

[@juliusaeta6749]

Vety Good e planation and tutorial.. God bless You brother..

[@JakeMarvinVillegas]

thank you sir, God Bless you too

[@alejandrosalvatore2004]

Thanks for the video

[@littleraptor9898]

what is an easy way to remove the insulation on the wires? burning it will cause the insulation to burn out quite far from where you wanted to. what is an efficient way to remove the insulation?

[@JakeMarvinVillegas]

The easy way is just heat it enough that the adhesive melts and u can push the wires from the slot sir. Or just slowly cut em away.

[@littleraptor9898]

@@JakeMarvinVillegas thanks for the advice, i found one by myself. i just use a dremel with a sanding slot, and that can really easilly, and fast remove the insulation

[@MKDSime]

Cant wait to see the other parts excellent work

[@JakeMarvinVillegas]

Thanks sime, I'm in the middle of editing and uploading it 😊

[@hasanrazaqadri9526]

You are very good teacher

[@JakeMarvinVillegas]

Thank you so much @HASAN KHAN! I really appreciated it ;)

[@hasanrazaqadri9526]

@@JakeMarvinVillegas my some connection to the commutator are weak so tell me how can i fix this?

[@JakeMarvinVillegas]

You should probably put an epoxy on the commutator connections. This will help it hold from very fast spin or from extreme heating.

[@mohamedwafir1577]

Excellent

[@JakeMarvinVillegas]

Thanks Mohamed 😊

[@kenanibrahimagaoglu1807]

mer haba ustst yapmiş olduğünüz armatür çalişmanin insallara faydali olsun diye yapiyorsaniz yada benim vidiyolarim daha çok izlensin diyorrsaniz yapilan vidiyo çalişmalarinizi insanlarin anlayaçaği şekilde yapinizki izleyenleriniz beyenleriniz çok olsun tetayli anlatim yapin saygilar

[@k.kalinga9728]

Difficult to understand

[@johansloft4834]

Sir pa help naman ilang turns po. 28 segment 14 slots.

[@JakeMarvinVillegas]

Dependi sa voltage un sir at sa klasi ng power tools mo

[@mohamedhafezzaghlol4791]

Shank you nester Ole the steps thes

[@jajaulnagan5101]

hndi detalyado