Rexton Vacuum Modulators

[@thomask2677]

Thanks! Great video

[@adnshah]

hi. i tried checking the vaccums. they all seem fine but the red 4wd check doesnt go away even after ckearing the code with scan 100. one more problem i need your help with is that the remote key is bot accessible through the scan 100 meither is the immobilizer. it cant get into the menu and access it. i changed the recstics module also. i put in a rkstic module. even that is not accessible through the scanner. what could be the solution.

[@mdshahinislam2887]

My Rexton 270 jeep a problems. The speed 50-60 up to engine check light on. This is how problem ?

[@TheDemonicaxe]

Scan ECU for error codes and share here

[@Squishy9387]

Is the modulator the same thing as the control switch for the turbo as I am looking at buying a 2008 actyon that has a turbo control switch issue

[@TheDemonicaxe]

I can't think of anything else that would be considered a turbo switch .. the actyon you speak of has which engine on it? 2.0Xdi ?

[@rodbot5000]

Excellent video

[@adnshah]

What about the 4x4 vacuum accuator?

[@TheDemonicaxe]

What would you like to know about the 4*4 Actuator ?

[@adnshah]

@@TheDemonicaxe My 4x4 is not working when i press the button, ive checked everything i dont know if the vacuum is working. when i put the scan 100 scanner on it, this is displayed: H-p1050, general position encoder fault and second C-p1050, general position encoder fault

[@TheDemonicaxe]

@@adnshah first you need to make sure that electrically the button works and sends the signal to the actuator , from there you need to check if the vacuum goes past the actuator , the actuator is like a valve , opens and allows the vacuum to go past it when you click the button for the 4*4 systems

[@adnshah]

@@TheDemonicaxe please guide me on how to [phone]

[@adnshah]

@@TheDemonicaxe how do i check if the buttons are sending the signal? nothing happens when i press them as of now

[@oregano24k66]

Excellent video greetings, but you could indicate the steps to clean the valve.

[@TheDemonicaxe]

what would you like to know ? ill try to help if i can

[@TheDemonicaxe]

by codes do you mean the Part Numbers or the Error codes you get if something is wrong with them ?

[@TheDemonicaxe]

yes both modulators have the same part number , you just need to know if its for the rexton from 2004-2007 or from 2007-2012 , thats when they changed tell me which model your rexton is and ill tell you which one fits your rexton

[@TheDemonicaxe]

6655403497

[@TheDemonicaxe]

look at the pictures of both , the one you mentioned is for newer models its design is reversed , it will be hard to fit it , for our old Rexton its the 6655403497 because of the design .. both modulators will work and both have the same function but its the connections and fitting points , the design is different

[@melikoliavu1958]

Hi my rexton 2014 w y200 is not engaging in 4x4 the front wheels dont engage when stuck only the back wheels? Can you please help me with the problem?

[@asasdf1551]

Dali je netko ima problem da moze ppmoci auto pali ide nakon voznje se ugasi i opet u pali i tako stalno hvala

[@smithmartine4928]

Never do this buy new