RF Explorer PLUS Expansion Module Installation Step-By-Step (020d)

This video is all about how to install the RFEM4G Expansion Module in an RF Explorer Plus (slim version).
I walk through the process step-by-step. We are doing this together; you are watching as I do it myself on my own unit.
I also show you how to select and operate with the module installed.
=== PROMISED LINKS ===
R.F. Explorer On-Line Installation Instructions
j3.rf-explorer.com/234
My PDF of these Instructions (as of 4/11/2022)
drive.google.com/file/d/1FX3V...
R.F. Explorer Firmware Download
www.rf-explorer.com/download
R.F. Explorer Battery Handling and Care Article
j3.rf-explorer.com/42-rfe/faq/...
Time Markers for Your Convenience
----------------------------
00:05 Introductions
01:02 Which Unit?
02:05 Update Your Firmware!
03:01 Gather the Required Tools
04:21 Opening the Box
05:40 Removing the Back Cover
07:26 Disconnect the Battery
08:24 Remove the Metallic Tape
11:59 Removing the Front Cover
12:50 Remove the Nut on the SMA Connector
13:25 Removing the Main PCB
14:12 Note the Power Switch Orientation
14:40 Pay Attention to the Mesh Washers
15:13 Orienting the Expansion Module to the Main PCB
16:08 Note the 16 pin Connector Position
16:53 Connecting the Expansion Module to the Main PCB
17:46 RF Explorer Folks: Battery Precaution Statements
19:35 Remove the SMA Cover
20:41 Preparing the Middle Case: Remove Rubber Plug
21:19 Lock-washer Location
21:47 Position the Power Actuator
22:33 Install the PCB Assembly in the Middle Case
24:18 Install the Front Cover
25:41 Installing the Metallic Tapes
28:11 Installing the Back Cover
28:24 Orientation
28:40 Plug the Battery into the Main PCB
29:23 Sliding the Back Panel into Place
30:03 Installing the Screws
31:55 Installing the Nuts on the SMA Connectors
33:00 Initial Power On Test
33:38 Frequency Expansion Test: On the Bench
34:09 Selecting the New Module: Stand Alone Mode
35:05 Selecting the New Module: PC Software
35:33 Setup for the Test: 2 GHz, 10MHz span
35:49 The Beautiful Results!
36:03 Final Comments and Toodle-Oots
-----------------------------

[@dennisqwertyuiop]

great instructions,,not step by step,,,but inch by inch,,,perfect