Even-odd mode analysis of 90 degree coupler/Branch line coupler by Dr. Niraj Kumar VIT Chennai

  Рет қаралды 27,662

RF Design Basics

RF Design Basics

Күн бұрын

Пікірлер: 16
@alperkayabas4563
@alperkayabas4563 4 жыл бұрын
Hi sir niraj. What did you do to find z ,1 / sqrt(2) i ? Can you eloborate the point ? I resemble the open circuit stub matching operation but i dont understand this portion
@RFDesignbasics
@RFDesignbasics 4 жыл бұрын
I did explain it during 18:55 to 20:55 but to be more specific for your query, for calculation of z as 1/sqrt(2). I have converted the whole circuit into admittance so that shunt stubs can be easily added. This is like a lambda/4 transformer circuit whose load admittance is 1+j and required input input admittance before left side stub is 1-j so that after adding left side admittance of j it will become 1-j+j=1. That is why I have taken square root of 1-j and 1+j for characteristic admittance of the lambda/4 line. Using this logic for the odd mode analysis too gives 1-j load admittance to be converted into 1+j for impedance matching. Hence characteristics admittance is square root of these two. Finally characteristics admittance is converted into characteristic impedance. Do remember, these values are normalised value. Hope it helps. If you still have query, let me know. Thank you.
@foodlicious9441
@foodlicious9441 8 ай бұрын
very detailed explanation sir, thankyou for making it easy to understand!
@srivatsungopalakrishanan9517
@srivatsungopalakrishanan9517 4 жыл бұрын
Very neatly presented. Easy to understand
@RFDesignbasics
@RFDesignbasics 4 жыл бұрын
Thanks
@SKPatelIITKGP
@SKPatelIITKGP 6 ай бұрын
Very nicely presented... please make some videos on even and odd mode analysis of Directional coupler, Coupled lines and coupled line C section used in schiffman phase shifter
@shyamsundard5824
@shyamsundard5824 4 ай бұрын
Sir a kind help . While writing the ABCD MATRIX, why are we neglecting the 1 ohm resistance
@gigasnow4875
@gigasnow4875 2 ай бұрын
May I ask what does the B1 to B4 mean in the video, are they related to S parameters? And why we always have a 1/2 before the sum or difference of Gamma, T? Many thanks!
@t012_amoghjoshi7
@t012_amoghjoshi7 4 ай бұрын
Sir, what is the need of Zo/ root(2) transmission line. What if we use Zo impedance transmission line?
@cenkozsoy1146
@cenkozsoy1146 4 жыл бұрын
Thanks from Turkey
@zonekiller4life
@zonekiller4life 3 жыл бұрын
How did you get the 1+j on the left side of the stub 20:00 ?
@RFDesignbasics
@RFDesignbasics 3 жыл бұрын
See the video again. It's explained clearly.
@Faaruk_123
@Faaruk_123 8 ай бұрын
Excellent sir
@umeshchandrakotha
@umeshchandrakotha 4 жыл бұрын
are branch line couplers and quadrature couplers same??
@RFDesignbasics
@RFDesignbasics 4 жыл бұрын
Yes
@lokajaudio3325
@lokajaudio3325 3 жыл бұрын
sift of fase
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Lecture30---Quadrature Hybrid Coupler
24:24
James Nagel
Рет қаралды 5 М.
these are the only perfect squares
12:39
Michael Penn
Рет қаралды 1,7 М.
Lecture -- Quadrature Hybrid Coupler
11:39
EMPossible
Рет қаралды 17 М.