RGB led light panel/led Lights/Building DIY LED lights/DIY RGB Nanoleaf/HOW TO MAKE RGB LIGHT PANELS

How to make RGB LED PANELS with plastic cardboard/RGB led light panel Use of magnets/DIY Nanoleaf Smart LED Panel/led light diy/Making DIY LED Lights/led light panel ceiling/led light panel design/diy led panel/diy gaming lights/DIY Nanoleaf Smart LED Panel/led light /Making DIY LED Lights
thanks for watching my video don't forget to like comment and
....................................subscribe..............................
................TD MADE .............
#LEDLIGTH
#LEDPanel
‪@tdmade‬
#td made
Music in this video
Learn more
Listen ad-free with KZbin Premium
Song
Heroes Tonight (feat. Johnning)
Artist
Janji
Licensed to KZbin by
LatinAutor - Warner Chappell, Warner Chappell, ASCAP, Featherstone Music (publishing), LatinAutorPerf, UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, and 21 music rights societies
Track: Jonny Koch & Annie Sollange - LOVE ME [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jonny Koch & Annie Sol...
Free Download / Stream: ncs.io/LOVEME
Play the LOVE ME game: dontyouloveme.com
Track: Cadmium - Be With You (feat. Grant Dawson) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Cadmium - Be With You ...
Free Download / Stream: ncs.io/BeWithYouYO

[@tdmade]

thanks for watching my video don't forget to like comment and subscribe ................TD MADE ............

[@alfinbenny7183]

Bro how is the total cost

[@karlosf414]

Hi bro, is posible replace the +RGB pin conector to only four magnets contacts?

[@hasanahmed3283]

First class LED Strips Light Project. Very beautiful. 💞

[@tdmade]

Thanks so much for watching my video. My channel is very small so I don't get many views

[@Chaosengel93_Cabal]

Great Work! probably with an ESP8266 and a small "base unit" u could build it like the real Nanolaefs controlled by an App as well. But overall it was the closest thing for DIY for now! Great inspiration, keep it up!

[@tdmade]

Cool idea!

[@Max.Mustermann.]

the best budget diy version ive seen till now :) the question is how many does it hold and when it need some "reinforcement" to hold on to the wall :) and it would be great if it would be ARGB and not just RGB ... keep em coming o/

[@tdmade]

You can use double tape to keep it on the wall

[@LowerKace]

I just found this video, I wish I had found it before I did a mock up of my own design, because theyre so similar theyre almost the same, but this one has more and is more efficient. Its my idea, just a little better. damn it

[@dilmirosika6009]

Ela ela

[@rajeshjain7950]

Mere Bhai

[@patrickmckowen2999]

Very cool 👍

[@tdmade]

Thanks 👍

[@rothens]

Hey! Thanks for the idea! :) I love it! I think I'll make it with WS2812B LEDs, as they are separately addressable, and I think I may have a solution for creating all triangles the same (so no A and B side are necessary)

[@emmanuelguibe4629]

Hi David, I am also interested in this principle of connecting separate panels but the solution A and B I find it a bit restrictive. If you have a solution to put the panels in any direction I want your solution. I looked everywhere but found nothing. thank you in advance

[@rothens]

@@emmanuelguibe4629 Hey Emmanuel! For the version shown in the video, you need to replace the 4 pin connectors on the sides with a 7 pin one. Currently it's +RGB on one version, and GBR+ on the other. If you place 7 pin connectors on each side, you could wire them like GBR+RGB hence the connection will be symmetrical, and you could connect the triangles in any order you'd like. I hope this makes sense, if not, I'll make a drawing :) I'm also thinking about buying pogo pins and pogo targets on aliexpress, and make the connection with them, so even the pins aren't required for connection

[@emmanuelguibe4629]

@@rothens I think I understand what you are telling me but a little drawing would be welcome. If you want I will give you my email to continue discussing this project. Pogo sockets would surely be a good solution and this is the closest thing to the Nanoleaf connection ([e-mail])

[@anonymouscat1338]

@@rothens Wouldn't it be BGR+RGB? I am a noob, just trying to understand the symmetry. Also, how are these 7 pins different from 4 pins? Thanks for the solution though!

[@rothens]

@@anonymouscat1338 It's easier to understand if you cut out two triangles from paper, and write the connections on the side, then try to match them :) whether GBR+RGB or RGB+GBR depends on the LED, however we've chosen a different path with Emmanuel. Write me an email if you are interested: [e-mail]

[@zaidbintahir875]

Great work 👍🏼

[@costashen4504]

Meka patta oiiii ❤️❤️❤️❤️❤️💪🏿

[@tdmade]

thanks sheno

[@riafrozen1139]

Bahan bahan nya apah aj kanuntuk bikin sperti itu

[@rio_rokie1636]

thank you bro, great video, now i can make my own

[@tdmade]

Have fun

[@laboratoriodesuporteainova2250]

Great ... waiting for addressable led version :)

[@asulliv1954]

That is so KOOL,thanks for showing us!

[@tdmade]

Any time!

[@Lynx-xf6cv]

It's amazing! Is it possible to join all the lights without the led connector but instead with a magnet? Like your first video?

[@sellagaming4705]

Wow is fantastic.

[@tdmade]

Thank you so much 😀

[@audranemery3317]

Great!

[@MRMELEX-pu6en]

sangat bagus......

[@5VoltChannel]

amazing...

[@TalkingTechTV]

මාත් හදාගන්න ඕනෙ 😃🤗

[@pr_poddaa_official]

අඩෝ..කොහෙ ගියත් ලංකාවේ කොල්ලෙක් .....ගැම්මක් ඇහ්....මාත් මේ එකක් හදන්න කියල බැලුවෙ 🙂

[@TalkingTechTV]

@@pr_poddaa_official 🙃🔥❤️

[@BRAINGAINS-]

Please make a video of this same but the panels 3d printed and use some alternate of the connectors like header pins to avoid mess looking forward to this version 😉 Btw great work

[@kimatong1166]

This is way better. No 3D printer needed. Just readily available materials.

[@BRAINGAINS-]

@@kimatong1166 true it is good anyway, but for a much cleaner replica 3d printed panels sound good.

[@manjulapr9704]

This is what I was searching for

[@woollysoxx]

nice!

[@tdmade]

Thanks for the visit

[@nishantbansal8461]

hey which type of cardboard is used here? can you provide me link of this ??

[@MoRiXoN1991]

Hello, I have a question, what are these white milk covers made of, from which side or I would ask for a link to buy. Thank you.

[@HassanDigitalLight]

Magnet Where Buying

[@dilakshidarshika1998]

Amazing 😍😍❤️❤️

[@blaadmoh7265]

Good one ....i Wold like to have one ..hhhhhh

[@bartolomatthew31]

what material is used for this panel?

[@skyboy9]

i kiss your hand❤️

[@guiltyfree557]

so geniusss, i start from the scratch :(( great job man 🤘

[@tdmade]

You can do it!

[@nazibuddin480]

Wish the next project would be making it with argb strips... 😅😅😅

[@tdmade]

ok bro..

[@navodyatheekshana2376]

😘😘😍😍🖤

[@vihangaoushan6422]

What is the front side board?

[@rubentimbol8387]

Hello can i know side panel did you use?

[@subhamsaha868]

Vai cost kina aya sob milake

[@ElKyUbY]

hola Please send me the circuit diagram and connector details. and if you have the schemas of everything?

[@randomvt6782]

Indo sendiri

[@fxdrawtube]

Great, what sensor tou used?

[@tdmade]

sensor not used

[@isufishingrawkz3933]

What is the white material u use for the front panel?

[@tdmade]

plastic cardboard

[@vaishaliparate9343]

Please send the details of the materials used and the buying link

[@tdmade]

www.google.com/search?q=White+PVC+Equal+U-shaped+Channel&rlz=1C1BNSD_enIT986IT986&sxsrf=APq-WBsZLQuHyWUId-EZXFxd0znMR6wwCg:1645814680473&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj8uZS7wZv2AhVASfEDHbqdCewQ_AUoAXoECCIQAw&biw=2560&bih=1297&dpr=1.5

[@bharathabhi2268]

What you used at the top

[@tdmade]

www.google.com/search?source=univ&tbm=isch&q=plastic+cardboard&hl=en-US&sa=X&ved=2ahUKEwilw8m4rpTxAhWJHuwKHbFzBPoQjJkEegQIBRAC&biw=2560&bih=1297

[@aldihenda2523]

What is the name of the item at the beginning of the video, which you cut into 20cm lengths?

[@tdmade]

www.tashop.it/it/profili-pvc-bianco-ad-u-mm-10x21x10x1-da-2-mt./?linkid=&gclid=Cj0KCQiAmeKQBhDvARIsAHJ7mF58VHa-TVm4rxqWGU_yTTtxpOIj4VNC7lNjFh0Fq0r_RKnJKj3pW1waApXCEALw_wcB

[@tdmade]

www.google.com/search?q=White+PVC+Equal+U-shaped+Channel&rlz=1C1BNSD_enIT986IT986&sxsrf=APq-WBsZLQuHyWUId-EZXFxd0znMR6wwCg:1645814680473&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj8uZS7wZv2AhVASfEDHbqdCewQ_AUoAXoECCIQAw&biw=2560&bih=1297&dpr=1.5

[@chaitanyavishal2162]

Please send me the circuit diagram and connector details

[@tdmade]

ok Send me an email

[@Rene-kg7pf]

I think I might wanna make this... in fact am very positive I will... But I might make it with diffused acrylic plastic instead which I can order in like 1 metre x 20 cm (or few cm longer and wider if needed) ... Ofc gonna cost a bit more .... But for this I wonder if that hot glue gonna be a good idea for this acrylic diffused plastic?? (I don't wanna screw that up coz the acrylic gonna be almost the most expensive in the project... though still cheaper than nanoleaf/govee) and for sure more fun making yourself

[@CRXSA]

Hi there, Will you be able to post a link to a PDF instructable in the description for this please so we can all see the materials used + sizes etc. thanks in advance. Also loved the video best looking and most efficient DIY of these lights!!

[@tdmade]

Done!Tell me what I need to know

[@CRXSA]

@@tdmade hiya could you send a me an email with everything

[@kahfihamzah8729]

@@tdmade please tell what materials are needed to make the lamp🙏🙏

[@LucNguyen-tw6do]

can you explain to me why it is divided into 2 types A and B. I have seen the wiring drawing. and see the 2 types are not different. Why is that?? Tks!

[@jrbarker7362]

RGB+ on one side and +BGR on the other side because its a mirror image to connect. Like panels cannot connect because R would go into + and g would go into

[@bryanlumley3077]

They look good, but not a fan of the led light burn threw!

[@tdmade]

www.google.com/search?q=rgb+connector+4+pin&sxsrf=AJOqlzXDYE9QReqbiiQB6Ne_luNVCi-f6w%3A1675796077993&source=hp&ei=bZ7iY5nuOfCSxc8Pnd2toAc&iflsig=AK50M_UAAAAAY-KsfcSfFcrlUm6BrRmzb5xHqAMWMMzr&oq=rgb+conn&gs_lcp=Cgdnd3Mtd2l6EAEYAjIFCAAQgAQyBQgAEIAEMgUIABCABDIFCAAQgAQyBQgAEIAEMgUIABCABDIFCAAQgAQyBQgAEIAEMgUIABCABDIFCAAQgAQ6BAgjECc6CwguEIAEEMcBENEDOggILhCABBDUAjoFCC4QgARQAFjgGGDeK2gAcAB4AIABUogBugSSAQE4mAEAoAEB&sclient=gws-wiz

[@x_rexter]

What the name of the connector?

[@seanomight5401]

Usually I don't care for no mic videos. But you did it how it should be done. You didn't take to long showing anything. But just the right amount of time. Well done. The only thing I would want different is to not see the leds at all.

[@krishnanakum7542]

Will you sell this ??

[@TalkingTechTV]

Omg

[@vitorlsbrito]

@rocketzbr, aí uma atualização pro seu projeto!

[@Phantom210]

What are the materials?? I need these in my life!!!!

[@panprince9267]

Nice video buddy can you make them with magnetic connections instead of connectors😅

[@tdmade]

You can

[@crunchwork8612]

Please make one for me

[@priyamannan7404]

Ok bro

[@นายน้อย-ผ5ฉ]

Good 👍👍👍

[@tdmade]

Thanks

[@nazibuddin480]

Awesome....

[@tdmade]

Many many thanks

[@dishaniprasadika2651]

Superb 👍👍

[@tdmade]

Thanks 🤗

[@dimuthucaushal3368]

Your work is great bro. I have watched the previous video where you used magnets to connect the electricity to others. Is there a way to do the same with 3pin or 4pin pixel LED strip bro?