RICOH MPC305 MPC305SP MPC305SPF Controller & BICU Board

Color Photocopier Ricoh Aficio MPC305 Error Problem Controller and BICU replacement. Controller SC Error: sc230, sc547, sc636, sc670, sc672, sc687, sc816, sc820, sc821, sc822. In most cases, when the copier shows such errors, you must check and possibly replace the BICU or CONTROLLER BOARD. Guide how to replace these two elements step by step. Replacing and repairing a photocopier is easy and will take you little time.
There are three types of self-diagnostics for the controller.
1. Power-on self-diagnostics: The machine automatically starts the self-diagnostics just after the power has been turned on.
2. SC detection: The machine automatically detects SC conditions at power-on or during operation.
If you are looking for a RICOH MPC305 copier part, I invite you to our portal.
CONTROLLER: copy-expert.com...
BICU: copy-expert.com...
ALL PARTS: copy-expert.com...
🔥🔥 KZbin SUPPORT: / @mrricoh
😁😆 PATREON: / copyexpertmoviestudio
🔥💥 PATRONITE: www.patronite....
📽Camera: CANON EOS250D
🎬 Plan lighting: Sachtler Reporter 200D
🎤 Microphone: Trust GXT 252 + Emita Plus Steraming
💻 Movie editing program: WonderShare Filmora
Copier parts www.copy-expert...
Facebook: / copy-expert-1134316788...
Used copier parts www.copy-expert...
#ricoh #aficio #problem #error #code #copier #photocopier #replacement #network #controller #replacement

[@-cortana4105]

Hello I hope you are well, I have a ricoh c2003 and the error code that appears on the screen is the SC670-01 can help me to know if it is the Controller?-BCU? or IPU? since I have no test plates then according to your experience I would like to know which of them can be? it is worth mentioning that the controller fell rain water dried and that was the error. and clean the connectors and nothing remains the same. appreciate your detailed comments, Greetings 🤠

[@MrRicoh]

@-cortana4105 In this case, you can only diagnose the fault if you replace individual PCBs. It is best to buy the entire controller box with all the PCBs and replace the whole thing. In my store, such a controller box costs 300 US dollars. Of course, this is a used item.

[@-cortana4105]

@@MrRicoh Hello thank you very much for answering, well I comment I changed the card for an operational was the ipu and control card and the printer remains the same. but now I found something different and is that before I marked the error SC670-01 and with the change gives me the error SC670-00 I have seen other tutorials on yt and searching on google and the only thing I find is to clean the connectors, which I already did and nothing. that new code as would be your solution? thank you for your help 🤗

[@MrRicoh]

@-cortana4105 Have you entered your machine's serial number into NVRAM?

[@enda4524]

Good evening Tomasz, I am a reseller, I have a problem with the Ricoh mpc 305 due to jamming of the sheet at the entrance of the fusing unit from the j019 signal, could you give me some information, thanks 👍👍

[@MrRicoh]

Maybe you have a broken input or output guide on the Fuser Unit. This is a common problem. The guide cannot be purchased individually, so you have to look for a whole used Fuser Unit. We also have this one: copy-expert.com/pl/p/-FUSER-UNIT-RICOH-MPC305-MPC305SP-MPC305SPF-D1174026-D117-4026-D1174096-D117-4096/5664

[@enda4524]

@@MrRicoh Good morning Tomasz I replaced the fuser unit now the machine no longer jams but now it prints the white sheet I had disconnected the bicu cables and put them back on then I removed the transfer roller and put them back on what could have happened? thank you very kind Tomasz

[@MrRicoh]

@enda3124 Remove and reinsert all Drum Units

[@ibraheemshah9580]

Hey, Can you please make the video of Replacing or Installing Paper Tray1 Lifting Motor ?😟

[@MrRicoh]

I don't have a video about it because the procedure is simple. Remove the case, take out the power supply and motherboard. Only then will you have access to the engine. Encorajo os espectadores a apoiar meu canal: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin Vídeos apenas para apoiadores: kzbin.info/aero/UUMOOHtXTtGHj33pUm8Gf2FH3A

[@SuperJimmyBennett]

you have the video of replacing the PCB BRB Toner Supply Board? which is behind the mother boards ?. we need one of those videos

[@MrRicoh]

When you enter MPC305 on my channel you will find many videos and there will certainly be one in which I take out these PCB boards.

[@pepeluis670]

Greetings, I need the controller board for a Ricoh MP 7502 copier, is it for sale?...I have a code SC-670

[@MrRicoh]

Do you have the catalog number of the disc you are asking about?

[@osamatawfik8768]

شكرا

[@MrRicoh]

أوصي بنفسي للمستقبل. حظا سعيدا في إصلاح الطابعة الخاصة بك.

[@enda4524]

Good evening tomasz I have a problem with the ricoh mpc 305 spf gives service code sc 101-00 I replaced the whole group scanner the exposure lamp does not turn on at the ignition.which could be the solution thanks thousand greetings from Naples Italy

[@MrRicoh]

Hello, I love Naples, I go there often, beautiful place. But your problem may unfortunately be the power of the Poweer Source PCB. I had such a problem only once and the replacement of the power supply helped. I hope it will not be your problem because PCB is expensive.

[@enda4524]

Good day TOMASZ thank you I will do this test I have a spare machine I try to replace the PCB power source I thought it was a question of laser or scanner however I will let you know the result happy holidays w Amalfi Sorrento Capri.

[@enda4524]

GOOD afternoon tomasz then the code sc101-00 I try to replace the pcb the exposure lamp does not turn on and on the dysplay it also signals a jam type symbol thanks

[@enda4524]

Good afternoon Tomasz I have a Ricoh mpc305 that tells me after 4/5 copy or print add yellow toner the toner is there what could it be? thank you very much hello Sorrento

[@MrRicoh]

Take out the toners and vacuum the inside of the copier for the toners. It generally helps.

[@enda4524]

Good evening I'm a dealer of ricoh machines. This model mpc305 spf already presents 2 machines the problem of the lack toner error setting cartridge which can be the cause and how to solve thank you very much.

[@MrRicoh]

If you used non-genuine toner, you can throw the copier in the trash. The hopper toner needs to be replaced and its replacement is cosmically complicated.

[@enda4524]

@@MrRicoh Good evening tomasz thank you for the answer then I have to translate your message I will let you know hello greetings Napoli Sorrento Amalfi

[@enda4524]

@@MrRicoh thankyou.

[@MrRicoh]

You probably know that I love Amalfi :)

[@muhammadishfaq8211]

sp 3100 Off

[@auraorozco5000]

enciende y se queda en please wait y sale error sc672 en ricoh mp c305

[@MrRicoh]

Esta es una falla muy común en su modelo de fotocopiadora. Si tiene suerte, todo lo que necesita hacer es reemplazar la unidad. Recuerde que después de reemplazar la unidad, deberá formatearla. Si reemplazar el disco no ayuda, deberá reemplazar el controlador, lo cual es muy costoso y ciertamente no puede hacerlo usted mismo. Lo mejor es llamar al centro de servicio, quien evaluará qué es necesario reemplazar. Esta corrupción de código es grave y debe abordarse.

[@enda4524]

good morning i am a small reseller of ricoh products i have a problem with a ricoh aficio moc305. During printing or copying it has a 5/6 cm wide band in which the color does not print well in fact the yellow color is predominant which mixed with the black of the print gives me an Olive Green can help me understand if it is a problem drum of some color or the laser not mounted correctly or in contact. Thank you good evening Tomasz tankyou

[@MrRicoh]

Hope you checked the drums, transfer and fusers yourself before writing this because they are ordinary consumables that wear out. So take out the two lasers and clean them.

[@enda4524]

​@@MrRicohgood morning Tomasz hello from Naples Sorrento Amalfi I am a small reseller of office machines I need your help if possible I have a RICOH mpc305 which has been blocked with the paper jam signal on the display signal j001 but sheets of paper no one points me to the door right side to be opened but nothing, what could be some sensor blocked? thank you so much Tomasz good work 👍👋☕🇮🇹❤️

[@muhammadishfaq8211]

I can solve the problem of format board of 819 . I can also solve the problems of all Richo models. I only want your solving methods

[@MrRicoh]

I'm glad. Watch all my movies. They show everything I know.

[@kevinsimiyu5550]

SC 312 error on MPC305SPF, advice on the possible solutions

[@MrRicoh]

Reinstall or replace the PCDU BLACK

[@enda4524]

@@MrRicoh Good morning tomasz I have a problem already the second machine, it is the ricoh mpc 305 spf . Error signal cartridge toner cano the other machine was black , basically I had to disassemble the rear contact card because the contacts were folded I had to disassemble the entire controller board behind a nice job in short however the machine continues to report the toner insertion error. What may have happened. Greetings from Enrico from Amalfi.Hello thank you for your help.

[@yaseenullah962]

Hello sir I have a proble sc 491 how to solve and wats a probel please tell me about this problem with am very upset please urgent .....

[@MrRicoh]

You have a photocopier that had no modifications and is now damaged. I showed everything in the movie. Now you need to mount an additional PCB and replace the damaged element.

[@muhammadishfaq8211]

How do u solve this problem SC 819

[@MrRicoh]

The problem is quite serious. The controller needs to be replaced. Here are the possibilities: • System program defective • Controller board defective • Optional board defective • Replace controller firmware Look for this: copy-expert.com/pl/c/Karta-sieciowa-Controller/19/1/default/1/searchquery/mpc305 Regards and good luck. 🔥🔥 KZbin SUPPORT: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin 😁😆 PATREON: www.patreon.com/CopyExpertMovieStudio 🔥💥 PATRONITE: www.patronite.pl/1796

[@stilluarts958]

how to fix error and ricoh mpc 305 RICOH ERROR SC 361-04

[@MrRicoh]

@stilluarts958 You have a problem with developing unit but I don't know which color. Maybe the DV's are worn out? Maybe the rollers in the DV are not spinning?

[@mixxerman7020]

sc 571

[@MrRicoh]

Causes: • Thermistor connection loose, broken, defective • Thermistor floating free, not positioned correctly • Thermistor defective Thank you and I invite you to watch other videos about repairing copiers and printers.

[@BMInformation]

sc144 error

[@MrRicoh]

Replace the following parts: • Replace the SBU board. • Replace the IPU board. • Replace the BCU board. • Replace the power/signal harness.