Kevin thanks for making this. This helps a lot! I’m gonna stick with 9 levels of assist but all the other stuff helps! Detail is appreciated!
@bigdan83373 жыл бұрын
This Video literally saved me, my bike stopped working and all it needed was the display to be reset. Thank you!!!
@toddglennbarrow2 жыл бұрын
Did you have an Error code?
@bigdan83372 жыл бұрын
@@toddglennbarrow No, flipped my bike upside down to do some repairs and the display must have been touching the floor and changed a bunch of the settings up lol.
@guilhermeteixeira5841 Жыл бұрын
@@bigdan8337 man. It happens to me. Exactly the same. How did you solve it? I’m in doubt about what voltage I have to select
@eastwood1113 жыл бұрын
Thank you for this information! Although the music did drive me crazy 😅 Edit: This was a lot easier to understand than reading that owners manual
@tadeuszmusic3 ай бұрын
Thanks so much! I have a macwheel ebike that has zero instructions online so this was a massive help
@memex563 жыл бұрын
What is missing is information that would tell you how the bike is affected by the various changes to settings. Setting the percentage of wattage for instance. Waiting on my Core 5 this week, I hope the manual is more detailed. The video walks through the various steps without much explanation regarding the why one would make changes or what the ideal settings might be. If anyone has answers to my questions here it would be great of you to explain. It would also be nice if R1U would comment on our concerns here. Thanks everyone!!
@olivercox25653 жыл бұрын
The percentage of wattage outputs a percentage of your total wattage! Not hard really. PAS 5 for example is set to 70% of max output, I changed mine to 90%.
@jacob82663 жыл бұрын
I have a Macwheel with this controller. This tutorial + PDF was amazing and helped me so much in understanding and modifying the stock settings. Thank you so much!
@Levenstone1323 жыл бұрын
A simple on/off is really all I want but those days are long gone! Thanks for posting this as my 20" commuter bike came with no instructions at all,although my controller doesn't seem to have as many options.
@wcswood5 ай бұрын
Sweet! Got my new Turris up to 28mph. That cutoff at 20 was a bummer. Looking forward to messing around with the rest of the settings.
@JoeD-ei8eb4 ай бұрын
How’d you do this? I only got pedal assist to 28 but not my throttle
@wcswood4 ай бұрын
@@JoeD-ei8eb That's right. 20 mph throttle, 28 mph pedal assist. It came as a class 2 with pedal assist only to 20 mph.
@wcswood4 ай бұрын
I also swapped the 12-32 cassette for an 11-28. Really helps get the most out of it, especially on the downhill. And 2.0 slick tires that roll better and don't kick up dirt and water.
@hubiefied3 жыл бұрын
"Store this setting and exit out." No, no, no. Tell me what button(s) to push. I'm not that smart and this is all new to me. Much like the Ride1Up written materials, the video assumes a level of expertise.
@russburkert37783 жыл бұрын
Agree 100%. He is giving instruction as if the audience already knows how to do all these features. Don't just say stuff like "next we'll do advanced features". or "cycle thru to ..." Say exactly what buttons need to be pressed in order to do whatever it is you are demonstrating. This howto video is very close to useless.
@kennyhart26993 жыл бұрын
@@russburkert3778 yes sir I just got my bike and I'm lost with the video
@brucereeves34482 жыл бұрын
@@kennyhart2699 Same here, it goes way too fast. I did finally get through it with trial and error, but this video needs to slow down and be more deliberate.
@kushpaladin2 жыл бұрын
exit out = hold (-) button for 2 seconds
@leejamesmccarthy2 жыл бұрын
Calm down guys! I'm no expert myself but I've just got a new ebike and I've been looking at vids all day and although this vid is slightly too complicated it has helped me and now I've got the bike just how I want it (I think)
@pandarouge36122 жыл бұрын
Thank you a lot for the very professional and informative content. Using the "advanced menu" (General parameters settings), I could increase the max speed of my 250w Yose Power up to 30km/h from default-legal limit 25km/h, thanks to your explanation. BUT (purchase 06.2022) it seems that the menu "SYs 7 - LS" has diseapeard ! It is not a matter to go faster, but the 25km/h limit is somehow too low for comfortable and realistic daily life. With just 30, I feel less limited "for nothing" as I myself easily reach this speed by pedaling: it is not a matter of safety, but common sense. Thx again.
@kancocorp2 жыл бұрын
This is great thank you, but two things: first can you make a full for the speed sensor video showing every detail setting please? And also, if you could please, make it more obvious exactly what you are pressing and only exactly when you are discussing it on the video simultaneously, please? thank you!!!
@Ride1Up2 жыл бұрын
The settings should be dialed in when you receive the bike so you can just enjoy it. If you need to adjust them, please review our knowledge base or reach out to our support team: www.Ride1UP.com/contact
@patdelarosa64002 жыл бұрын
True he just talking and not really showing what to do.
@patdelarosa64002 жыл бұрын
Lol just saw his response to your request. He sounds like some people I work with they just wanna talk and talk but once you want them to exactly explain what they are saying they respond with the " that's not my department"
@LondonEats3 жыл бұрын
Hi sorry please could you help me my bike is 36v 250w motor in regards to the VOL setting is this setting to indicate how much battery is left or isit voltage control to the motor? My default value on setting 1 is not 31.5 but 10 please could you explain what VOL is
@grandpagreytv92762 жыл бұрын
Can you tell me why you changed the PA percentages from default to your own? What difference does it make (better mileage per charge)(better overall performance)? Thank you in advance
@paulanthony855911 ай бұрын
Life saving video. They will sing songs of you my dear friend
@kiidzbop2621 Жыл бұрын
Awesome this just helped me get noving 😅
@mikes01213 жыл бұрын
Hey i have a macwheel cruiser 550 i eneter advance setting i dont have the LS speed function could you help change my max speed i have same display
@bigmac30063 жыл бұрын
Why can't I order a rear rack for my Ride1up 500 bike? I just received 2 of your bikes and decided I want the rear rack and was told no, I can't buy one from you. I don't get it?
@TimRicherson2 жыл бұрын
They want their money up-front. It's pretty bad customer service to not allow buying fenders after you've bought the bike. I've never seen any good reason listed. Other racks/fenders cost less too, but you can't be 100% sure that most of them will fit the bike without a lot of precise measurement.
@jackjude3 жыл бұрын
what's the 'M' button?
@newcybrown63522 жыл бұрын
Very helpful video .Thanks .
@brianchun190810 ай бұрын
Life saver. Thank you
@Yelnats872 жыл бұрын
I love youtube man! This helped me from throwing my ebike out of the window!👍
@Bryanx19644 жыл бұрын
I'm getting my 500 delivered in about 2 weeks. Im already planning on upgrading to one of the other Ride1up computers they offer. This one looks so confusing. I'd rather spend the money for a better one. I'm surprised they actually still use this one. The other ones they offer seem so much easier to use.
@jamalanas9073 Жыл бұрын
Thank you bro you helped me so much
@tomdurkin66573 жыл бұрын
great informative video!
@bobbarbato99204 жыл бұрын
I am seriously considering the Core 5. It checks all the boxes for what I need. Is is possible to upgrade the display to the color version that is on the 700?
@dapar992 жыл бұрын
Soooo,,,,You do understand that using a term like "cycle through" means nothing unless you have previously defined what this term means.
@steveclayton99016 ай бұрын
My speedometer/odometer are not updating on my Core-5. Concerned that other features are not updating... battery level and other features.
@HTtechie4 жыл бұрын
Why is this manual different than the one shown under Ride1UP Support page for the Core-5? Does lowering the percentage on PAS 1 help with the fast startup speed? Thanks!
@Ride1Up4 жыл бұрын
The Core-5 manual isn't yet updated as the older generation was a different display. No, lowering the percentage on PAS1 would not increase acceleration.
@Bismvth8 ай бұрын
I'd really love if the "M" button was better explained in this video. If it was trivial I wouldn't have had to search for a video to help me find it.
@Azzaleas777 Жыл бұрын
Hello mate ... ive just purchased a fluid bolt e comuter with this display & have stuffed some settings ... is there a complete manual that shows factory settings or basic starter settings... i cant see anything here im probably not looking properly
@Azzaleas777 Жыл бұрын
Ive altered the speedometer.. its showing a higher setting than what im doing ifvthat helps
@Ride1Up Жыл бұрын
Yours may vary, but you can find the link for the manual in the description below and on our support page.
@Azzaleas777 Жыл бұрын
Thank you
@giggsandbiggs10 ай бұрын
Ive got this display on my ebike, but no settings can be changed. Is there a way of unlocking them so i can change settings?
@user-ow2zp8us7u2 жыл бұрын
Please I need the password to get into the screen it's not letting me it's showing _ _
@lonestartex19 ай бұрын
Does Powering Off erase the Trip Meter distance back to zero automatically? or is Resetting the Trip meter only done manually?
@janetschulz56554 жыл бұрын
Hey i have problem with speed limit my is 24 and i go to advaced setings to speed limit Change i Press+ and nothing happened -to
@GschnakenbergJr4 жыл бұрын
If you changed units to mph perhaps the speed indication is in mph and the top speed of 40 kph is equal to about 24.8 mph. I presume by "advanced settings" you mean General Parameter Settings accessed by UP&DN hold 2 sec followed by DN&Poweron button for 2 seconds. There is another speed limit setting deep down under personalized settings that is preset to 40 k/h (24 m/h) by manufacturer and is not changeable.
@janetschulz56554 жыл бұрын
@@GschnakenbergJr i Press +- togheter 2sec and nothing happen i trying 💯 time nothing :( i can only Look what setings i have Setup Bit can't Change i think i have locked by producent this bike
@enjoythegameandmore6 ай бұрын
Questo display é compatibile con Vivobike Vf20h ?
@erlingotrade8059 Жыл бұрын
Hello. On my bike i have a error 30. What it can be? Thanks
@KINGOFTHETHRILL862 ай бұрын
Anybody know what the magnet amount should be 6? For the acfe cruiser?
@matthewv805Ай бұрын
n=006 is what my Cafe cruiser is set for
@Fitz-tz6uq3 жыл бұрын
I adjusted my Assist Level Ratio settings. I like level 1@ 38, 2@ 50....... My question is, 5 is default at 96. Is there a downside of taking it up to 100?
@TimRicherson2 жыл бұрын
That's a great question. Did you ever get this answered or try it out?
@Fitz-tz6uq2 жыл бұрын
@@TimRicherson I took it to 100 (AO) and I had no problems.
@woundedknee1872 жыл бұрын
I have the same panel but without the lettering in the front what I what I'm trying to figure out is why yours has the letters displaying what displaying what you're moving and my display and mine don't it has 1 through 17 How do you get it to turn into letters or can you
@BigsteakOne2 жыл бұрын
Hi, I have a Vulcano ebike with 5 in 1 cable and free plug for the throttle. Once connected, it only works with assistance at 0. Could you tell me which menu function I need to set to make it work with any assistance level? The display is a Bigway, same as this video. Thanks in advance for your reply.
@kamepw98473 ай бұрын
Is there anyway to infterfere with the manufacturers settings?
@fifififo59182 жыл бұрын
Is it possible to override the throttle limiter at all? It is governed at 20 mph. Will kicking up the max wattage output to 18w do anything?
@madcannagrow28332 жыл бұрын
No you’ll just get to 20mph faster
@91352vato Жыл бұрын
Yes. I can show you….
@ccdrev993 жыл бұрын
my ancheer hummer has this display... how do I set it so I can use throttle + pedal assist at the same time?
@Fitz-tz6uq3 жыл бұрын
I’ve been digging for the same info. I don’t think it’s possible. 😏
@predragnijebitno55299 ай бұрын
Can someone answer my question? I have a problem with charging the battery, at first I thought it was a bad battery, so I took another one that was new and it also could not be fully charged, I checked the vol on the display, the parameters were ok, the charger is also ok. Does anyone know what the problem is?
@clarkie53 жыл бұрын
Hold the minus button for 2 seconds to exit out.
@jpeats4920 Жыл бұрын
Help? The headlight on my bike stays on…even after turning the display power off?
@Ride1Up Жыл бұрын
Please contact ride1up.com/support. It could be a loose or damaged wire.
@1PJEE13 жыл бұрын
My screen turns off when i press + and - what can I do?
@TheSapphire9813 жыл бұрын
Mine does this too.....need help!
@stimpz3603 жыл бұрын
Hi does this work for the WAU bike aswell? Having issues with the display showing me how much battery I have left and when I accelerate the battery shows as drained but when I let go the display shows battery full
@memex563 жыл бұрын
Also , the link above takes you to a "Not Found" page.. what's with that? I'm assuming a PDF file.
@PaulGarwood2 жыл бұрын
Please is there a way to reset this back to the original factory settings?
@robert40272 жыл бұрын
Awesome information. Just received my Ancheer Hummer model bike today and no instructions on how to do this. How to disconnect speed limiter please ?
@Ride1Up2 жыл бұрын
Sorry, we cannot provide instructions for non Ride1UP ebikes. You will have to contact the company you purchased it from.
@philandrews1002 жыл бұрын
Thank you Thank you Thank you Thank you Thank you! x
@markojovanovic47532 жыл бұрын
Cruse control how to activate,how to adjust?
@DreamSports3 жыл бұрын
I have the Bafang 500s. I can't figure out how to reset the Trip meter.
@91352vato Жыл бұрын
Are you adjusting the voltage for a 48V battery?
@joselguerra02 жыл бұрын
Can someone pleaseeee tell me how to fix my issue. I went to ride my bike using this display, and when I turned it on it didn’t allow me to go to 0 which is fully electric mode and it didn’t allow me to go above setting 3 The PAS is gone. How do I set it back to the way it was before?
@scottconnors8419 Жыл бұрын
I got a corev5 my battery bar doesn't move from reading full always? It left me stranded 8 miles from home 1st charge? Any way to adjust or get full battery bar to change with the battery draining and be accurate? These core 5 are heavy not a easy 8 miles home w dog in back too. Thnx
@Ride1Up Жыл бұрын
We are sorry to hear that, make sure your battery is fully charged. The display settings for battery are adjustable. If this persists, please contact us ride1up.com
@jkuang4 жыл бұрын
What does this mean? Can anyone who has not used an electric bike, reading the below sentences, have any idea what that means? Show in a video, please! Assistance levels indicate the output power of the motor. The default value is level “1”. The default power ranges from level “0” to level “5”.The output power is zero on Level “0”. Level “1” is the minimum power. Level “5” is the maximum power. Gear to level “5” and then press the UP button, the interface shows “5” still and “5” flashing prompts top. Gear to level “0” and then press the DOWN button, the interface shows “0” still and “0” flashing prompts low. To change assistance level, press the UP/DOWN to increase or decrease until the desired assistance level is displayed.
@MultiBloxx10 ай бұрын
This is the set up I'm looking for my 48v 250w fat bike 20 inch anyone know if this display and controler will work with my bike
@isaacmarin10783 жыл бұрын
I wish there was a battery % display. I cannot find one on either my battery, charger, or bike display on my core-5. I clicked the battery button and it lit up green with a partial charge, and then lit up blue when I accidently left it charging overnight. You would think green would mean full and blue would be partial and yellow/red would be low. I am confused.
@ramarrie3 жыл бұрын
each segment is 25%, 3 segments is good enough for your battery life
@edobres42973 жыл бұрын
I don't now how you modified Speed limit, i did It on May display settings 40 but the limit Is bicicle go 25
@fastneonman_vr16802 жыл бұрын
I have a controller made by vinka and it looks almost exactly like this however, it does not let me access the settings. I was hoping to remove the speed restriction on it. Do you know how I may be able to do so?
@Ride1Up2 жыл бұрын
Unfortunately, other displays and internal motor controllers may not be calibrated to work with ours. You can adjust other settings in the display to get more power though.
@calvintanner78973 жыл бұрын
Will this work for all electric bikes including the Scootstar Rockstar electric bike?
@MatthewRayFlicks2 жыл бұрын
I have one of these 500 series and I’ve set my speed limit to 40, but I’m still limited to 20mph. How can I turn up the speed?
@marku22882 жыл бұрын
I would also like to know this too. I put it up to 40 and still limited to 20
@o0o-jd-o0o952 жыл бұрын
I had to change my wheel size it looks like it defaults on 700c but mine has 26 inch tires which is a setting the 26
@anthonybautista3693 Жыл бұрын
What’s the password for ???
@andrewfreeman8811 ай бұрын
Anyone know how to turn Off Pedal assist? Just throttle only?
@juhonurminen7538 Жыл бұрын
What does it mean if it says P4 on the password screen? I cant acces the advanced settings and the default passwords dont work
@Ride1Up Жыл бұрын
If this issue persists, please contact us ride1up.com
@marku22882 жыл бұрын
Does anyone know if we can upgrade this display with something different?
@DaianaShiinaay2 жыл бұрын
Mine don’t show up that it’s charged and my battery it’s
@catastrosmegasword3 жыл бұрын
My 500 series fat bike getting drained after 20 kms on a full charge and its a new bike. I used the same setting but still I am having issues .Can you suggest something?
@ramarrie3 жыл бұрын
It is not a motorcycle, you have to pedal assist, I use it in a hilly area for 10 miles and the battery indicator barely moves (the one in the battery ,not the display)
@LuHuang2 жыл бұрын
Hi! Do you know how should clear the total mileage?
@magneto444 жыл бұрын
thanks!
@MotoLuc3 жыл бұрын
Ciao Ride 1 UP, ho trovato il video molto interessante, purtroppo non capisco cosa blocca la velocità massima. Ho impostato su L5 il limite di 40 km/h ma continua a limitarsi ai 25 km/h . Forse si deve cambiare qualche altra impostazione? Riesci ad aiutarmi? Grazie.
@alessandrobucciarelli15403 жыл бұрын
Ci sei riuscito?
@MotoLuc3 жыл бұрын
@@alessandrobucciarelli1540 ciao, no, purtroppo appena oltrepasso i 25/26 il motore smette di erogare energia 🤗😞
@alessandrobucciarelli15403 жыл бұрын
@@MotoLuc io ho visto che bisogna cambiare Il p1 e portarlo a p8
@davidwinston16272 жыл бұрын
Is there any chance this will work on an Aventon Pace? It would be great to control the PAS settings using this display instead.
@Ride1Up2 жыл бұрын
I would just get a Ride1UP instead. If you want to upgrade your display and already own an Aventon, you will have to contact them to see if there are compatible options.
@davidwinston16272 жыл бұрын
@@Ride1Up Thanks - I did more research and realized it would not work.
@ScottElblein2 жыл бұрын
Which one adjusts the speedometer? My speed shown is about 3-4 mph too slow.
@kevinrabbers56665 ай бұрын
Tire size
@stevenfox34658 ай бұрын
Where is this "M" button ??
@daddurs22062 жыл бұрын
How do you get the blue backlight to stay on?
@707619neto2 жыл бұрын
Hold the + button for 5 seconds
@tr_swar75092 жыл бұрын
Even though I set the speed limit to 40, it does not exceed 23km/h.
@MarcShoup-lr5bw Жыл бұрын
This is my 2nd Keurig coffee maker of this model. kzbin.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first worked fine for more than 2 years, and I could still get a decent cup of coffee out of it if I fiddled with it when I decided to replace it. The problem I had with my first unit was this: When attempting to brew a cup of coffee, the unit would either keep brewing until the coffee was undrinkable or it would not run long enough and the coffee produced was way too strong. I cleaned the unit as best I could but it did not help. So in the end it was just too much trouble to get a good cup of coffee out of it, so I decided to replace it with a new one, which has been working great since I unpacked it.
@GH-wt7ww2 жыл бұрын
This was posted over a year ago. Do these settings apply to the 2021 500 series model?
@kushpaladin2 жыл бұрын
yes. i got my Core-5 in Jan 2022 and controller is the same, the settings are the same
@pandarouge36122 жыл бұрын
@@kushpaladin June 2022, same too. Only the LS (limit speed) in the advance menu is not available...
@alessandrobucciarelli15403 жыл бұрын
Come si sblocca la velocità di questo display
@riccardozocchi77163 жыл бұрын
Non riesco ad aumentare la velocità nella modalità acceleratore....cioè funziona ma va a solo 25 km/h no a 40km/h... Quancuno mi può aiutare? Grazie
@EvilGasMusic Жыл бұрын
I set my backlight to 3 and it goes back to normal straight away
@Ride1Up Жыл бұрын
If this issue is persisting, please contact us ride1up.com
@kef1033 жыл бұрын
Why is vol missing from my settings, kzbin.info/www/bejne/i5ypnH6KnKd7j9k I am considering upgrading to a 500 series from ride1up however I would like to have the display from the 700 series as I have way too many issues with key-display model with this type of menu .
@alessandrobucciarelli15403 жыл бұрын
Come si sblocca questo display
@lukesimpson8532 Жыл бұрын
I had copied this video on my ebike. When going back to the home screen to change my wheel size. Now I have an err26 code flashing on my screen. And i can not use my bike with this screen.
@Ride1Up Жыл бұрын
Please reach out to the manufacturer of your bike. If it is a Ride1UP please contact us ride1up.com/contact
@user-ow2zp8us7u2 жыл бұрын
Reset the password lost it or won't come on
@Brucenewyork2 жыл бұрын
I happen to like the display however the tutorial is going way way way too quick. To follow that you must either have to know Computers will be familiar with this. He really should slow down when he’s explaining how to use this especially the conversion from kilometers to miles per hour
@fifififo59182 жыл бұрын
He does go fast but just pause and back up
@denissen994 жыл бұрын
My Core-5 came with a different computer......?
@Ride1Up4 жыл бұрын
Yes, this is for the newer generation Core-5 displays for all future models. The first generation Core5 has a very simple display.
@187-clashofclanscr62 жыл бұрын
My speed is no longer displayed
@jkuang4 жыл бұрын
How do you use the bike? You just click through some advanced menus. But you do not show how to use the bike!
@markp64322 жыл бұрын
Please redo this video with no background music and go through the steps slower. Thank you.
@Ride1Up2 жыл бұрын
Thank you for the feedback. Please review this article on our support page if you have additional questions on how to use your display: support.ride1up.com/support/solutions/articles/65000167606-cafe-cruiser-500-series-core-5-display.
@faragmostafa633 Жыл бұрын
Wahoo!
@maaxz03 жыл бұрын
I think in almania dont work 🇩🇪
@user-ow2zp8us7u2 жыл бұрын
Need to reset password cd 861
@christodu62460 Жыл бұрын
Revive Your Biking Habit
@creed81133 жыл бұрын
How to get it stay in full freaking throttle mode? I didn't buy a Motorbike to pedal, that is ridiculous, I want full throttle without having to leave the settings menu display on constantly. Whata p i t a.
@ramarrie3 жыл бұрын
it is not a motorbike, is a bike with motor and pedal assist, Tessla is coming out with the one you want.
@creed81133 жыл бұрын
@@ramarrie I don't want anything from Tesla, except for all the subsided money they took! I know how to get the motorized bicycle in full throttle mode, but it should be much easier than that.
@juanpfloresdiaz3 жыл бұрын
Do not buy from this company, warranty is full of shit, your bike will have issues and you will be left to deal with them on your own. Look elsewhere.
@FireCulex Жыл бұрын
My SCA is in watts which I like better, though based on real world tests the watts display shows 30%-40% less... ie. instead of 24 it shows 16 or instead of 70 it shows 50. Also my Turris Max Current appears to be set to 20a out of the box, I reduced it to 18a cause 48*18a = 864 peak.