Thanks for the great video. Just a heads up, your HH150 link isn't working anymore. Might want to update it so you aren't missing out on the revenue :)
@RidgeLife6 ай бұрын
Thanks for the info!
@fireman9693 жыл бұрын
You have to be careful. I have seen the hydraulic fluid over filled many times in the fire service. The reason it is under the front seat, is because it should be checked with all hydraulics contracted. When extended, there is more fluid in them and that is why the tank level will be lower.
@RidgeLife3 жыл бұрын
Thank you very much!!!
@ldcampbell19564 жыл бұрын
"We gotta put the bottom skid plate on. I'm going to do that real quick." Yeah right. You left out the best part where we could listen to you screaming and cussing.
@RidgeLife4 жыл бұрын
Larry Campbell ha! You know that’s right!
@htssoutboardsboatstrains9784Ай бұрын
Thank you for doing this video, I have one and it may only have 600hrs ( bought it from a neighbor ) but I bet it never had a full service :( AND to just get a clue I did a KZbin search, found this and this answered a LOT of detail questions I had on both the service but the vehicle in general :)
@RidgeLifeАй бұрын
Glad I could help!
@MrPancake08254 жыл бұрын
Tim, how about reading the filter numbers faster, and then please don't list them in the comments. :-/ (Tough crowd...) :-)
@RidgeLife4 жыл бұрын
Ha! Sorry about that!
@MrPancake08254 жыл бұрын
@@RidgeLife We love our x1140 also. Thank you for the video.
@RidgeLife4 жыл бұрын
I updated them in the description. Sorry for late notice. These were from the dealer as some have said their dealer gave them different parts numbers for the hyd filters. Please let me know what you used?
@ETXDiscountTowing26 ай бұрын
Why didn’t you drain the hydraulic fluid when you changed the filters?
@RidgeLife6 ай бұрын
It didn’t call for it. Fluid will last a long time.
@m.cooper18542 жыл бұрын
Helpful video. Thanks. I agree with another comment that it was much easier for me to use my oil extractor. The oil filter is very hard to reach behind the battery. I got fed up, disconnected and pulled the battery out for access. The larger HST filter is incredibly stubborn to remove on the first 50-hour service. I however did not replace the smaller filter until both were off for leverage and access to the larger forward filter. I too noticed no drop in UDT fluid level in the transmission and a bit more than a quart required at the front tank. Worth mentioning: don't forget to grease the zerk fittings on the suspension A-arms --- maybe greased at the factory or dealer PDI, but maybe not. Very few KZbin videos on the X1140 which is peculiar.
@RidgeLife2 жыл бұрын
Thank you! I agree. I need to do a followup grease and fluid top off video.
@WoodsTreeFarm4 жыл бұрын
Great video - i'm gonna be getting one of these eventually. Thanks for sharing!
@RidgeLife4 жыл бұрын
My pleasure! Take care.
@Porty1119 Жыл бұрын
Thanks! I just picked one of these up at an auction and will be changing all fluids and filters before putting it into service as a utility vehicle for an underground gold mine; this video was helpful.
@RidgeLife Жыл бұрын
Glad I could help!
@henrymendoza95654 жыл бұрын
I use a fluid extractor for the engine oil... waaay easier then having to drop skid plate
@RidgeLife4 жыл бұрын
Great idea! Thx!
@conmanumber13 жыл бұрын
Problem it will not get 100% out and the bung seizes on if not used. The bung has a magnet that needs cleened too. I slap a powerful magnet on the filter body which works too.
@jaytomson70523 жыл бұрын
@@conmanumber1 cool idea.
@conmanumber13 жыл бұрын
@@jaytomson7052 Jay, at the hardware store in kitchen joinery hardware there are really strong magnets the size of a coin. They hurt if snapped on fingertips by accident They are used to close drawers and cupboard doors.
@Post_Oak_ Жыл бұрын
Does anyone know where the oil pressure switch is?
@RidgeLife Жыл бұрын
Hmm no sorry!
@roberteshaw4590 Жыл бұрын
decided after watching your video to do mine 1120, 2021 model. I ran into a problem as the small filter was fine, but the larger was a bitch. Had to go to Napa to buy another filter wrench. I could not get initially, the larger without taking off the smaller. ( a lot of fluid lost as a result) my old wrench and my new one would not allow me to attack the filter from the bottom, just the center area due to the configuration of the filter tool. I had to attack it from the center as a result, very little area to work with. Could you please tell your model or exact type of filter wrench used. The issue I found was the silver colored inlet or outlet metal tube caring hydro fluid would prevent my wrench from grabbing the filter as yours did. Hopefully this makes some sense. Thanks, Robert TN
@RidgeLife Жыл бұрын
Sorry. I got it at auto-zone though.
@greggdell46774 жыл бұрын
Thanks so much for a very easy to understand tutorial. Just took delivery Friday 7/24/20 of a new RTV X1100c so will need to do the 50 hour service in a bit. All the Best, Gregg
@RidgeLife4 жыл бұрын
Glad it helped! Good luck and enjoy your awesome machine. Take care Gregg!
@clintbryan89672 жыл бұрын
Are you still happy with your machine? I am considering going from a Honda Pioneer 1000-5 to the RTV - 1140. Thanks
@RidgeLife2 жыл бұрын
Love it! Well over 1000 miles now.
@OldReddingFarm4 жыл бұрын
jeez I can only dream about owning one of those. Someday
@RidgeLife4 жыл бұрын
They sure make quick work of chores!
@chrisbartlett43582 жыл бұрын
What did you use to fill the hydraulic tank? After changing the filters on my kubota it was completely empty. Which I thought was weird. Thank you for the video too, very helpful.
@RidgeLife2 жыл бұрын
That’s weird. I used the oem oil super UDT2.
@DamnSkippy8784 Жыл бұрын
Informative video. I have the same machine in Camo. I have noticed more of a buzzing or humming sound when I start it colder weather here in Michigan that comes from the rear of the machine. Any ideas. I can send a video.
@RidgeLife Жыл бұрын
Have you cleaned the arrestor? There are instructions on it (muffler).
@gerardgayy2708 Жыл бұрын
How do you like that hitch, I think it is a design flaw that they have the receiver mounted so low.
@RidgeLife Жыл бұрын
Yeah wish higher but works well.
@chrisgerace6124 Жыл бұрын
What is with the two OIL fill caps on top of the motor. The one you used to fill the motor oil then there is a second one a few inches away but on a lower spot.
@RidgeLife Жыл бұрын
Chris, sorry for the delay. I really don't know. I have only used the top one.
@NaturesImageFarmGregBurns3 жыл бұрын
Great video Tim, changing my fluids today and was scratching my head on some of the fill and filter locations. Thanks!
@RidgeLife3 жыл бұрын
Good luck! I need to lube mine and hope to have a video on that soon!
@conmanumber13 жыл бұрын
Hi. Amsoil filters and oils exceeds all factory specifications and out perform all. Will Kubota accept this?, I use Amsoil as i hate having oil lying around farm.
@RidgeLife3 жыл бұрын
Hmm not sure! I may swap after the warranty run out. I know it really doesn’t matter but like to stay with it. I’m a sucker.
@platonkavvadias85412 жыл бұрын
Great video. What made you get a Kubota instead of Kawasaki or John Deere or Honda 500?
@RidgeLife2 жыл бұрын
Love the hydraulic dump bed and tractor like reliability!
@thedude38964 жыл бұрын
Nice video, I agree with Terry, didn't quite get those part numbers, you think you could post them in comments. Also a video on lubrication for the RVT1140 would be nice
@RidgeLife4 жыл бұрын
I updated the part number on your last comment and the description. I will have to do one on Lubrication for sure!!! Thx!
@thall60763 жыл бұрын
Awesome video, looking to get a kubota RTV our local kubota dealer doesn’t have any he said prob be in June they will have some.
@RidgeLife3 жыл бұрын
Love love mine. Not a speed demon though.
@chrisgerace61243 жыл бұрын
Where did you get the storage bag behind the seat? We get our delivered tomorrow and I bookmarked the video for reference. Thank you
@RidgeLife3 жыл бұрын
Thanks! I ordered from Amazon Here is the link- amzn.to/3kQdnUv
@ErnieHatmaker4 жыл бұрын
I can see you doing stuff, but there are no captions so I have no idea what is happening. I see a big red funnel. Are you making funnel cake with all that oil?😂
@RidgeLife4 жыл бұрын
Ha! Some people actually listen to the videos instead of laughing at how Google translates my hillbilly dialect. LOL!
@ErnieHatmaker4 жыл бұрын
@@RidgeLife 😂😂I'm not "some people".
@dosstheboss1002 жыл бұрын
The fluid you lost during filter change will not show until you run the hydraulics to fill the filters up
@RidgeLife2 жыл бұрын
Good point!
@CastleHives4 жыл бұрын
Does this mean you can rip through the woods on another live?
@RidgeLife4 жыл бұрын
Ha! Not yet. This was filmed before the rear end issue but will be back at it soon! Thx
@pattyhughes74772 жыл бұрын
You do know you can put that dump bed in float mode and pick it up manually
@RidgeLife2 жыл бұрын
Yes ma'am. Pretty cool feature thank for mentioning it!
@temperancesadventures48964 жыл бұрын
Thanks for sharing
@RidgeLife4 жыл бұрын
Thank for watching. Have a great day!
@2ndhelpingcooking9634 жыл бұрын
Very nice tutorial. I hope you are all staying healthy.
@RidgeLife4 жыл бұрын
Thank you very much and you all as well!
@glennjustice27602 жыл бұрын
Thanks Tim. Great video
@RidgeLife2 жыл бұрын
Thank you.
@sergiorangeljr9160 Жыл бұрын
I do y recall u pulling the transmission filter off 🤔
@RidgeLife Жыл бұрын
I did oil and two hyd filters.
@sergiorangeljr9160 Жыл бұрын
Hey brother, my headlights are not working but every other light in the dash is working would you know why does it have a relay or fuse?
@RidgeLife Жыл бұрын
@@sergiorangeljr9160 sorry man. I sure don’t. No issues here so far.
@CooperFamilyHomestead4 жыл бұрын
Great video on the kubota!
@RidgeLife4 жыл бұрын
Cooper Family Homestead thank you!
@HomesteadingNorthernMichigan4 жыл бұрын
Nice job.... I was looking to see if you damaged a soloniod or something on the rear end lol
@RidgeLife4 жыл бұрын
Ha! No. This isn't my first rodeo!
@HomesteadingNorthernMichigan4 жыл бұрын
@@RidgeLife you're a pro.... At least in video you are
@RidgeLife4 жыл бұрын
@@HomesteadingNorthernMichigan Ha! I stayed at a Holiday Inn Express!!!
@HomesteadingNorthernMichigan4 жыл бұрын
@@RidgeLife that one went right over my head lol
@HomesteadingNorthernMichigan4 жыл бұрын
I imagine it's a commercial lol
@SunnieDIY4 жыл бұрын
Pretty awesome tutorial.
@RidgeLife4 жыл бұрын
Thanks Sunnie!
@puckme163 жыл бұрын
Great video many thanks
@RidgeLife3 жыл бұрын
Glad you enjoyed it! Thanks!
@billymitchell68504 жыл бұрын
Thank you
@RidgeLife4 жыл бұрын
You're welcome!
@thedude38964 жыл бұрын
Hi Tim, I do have a question regarding the trans filters, I getting a different part number on the suction filter (yellow) HHK 32-16770 is the part number I'm getting from my Kubota dealer, you were a little fast on reading those numbers, but none of them sounded like this part number, the other two were correct
@RidgeLife4 жыл бұрын
I got these from the Dealer as well. They provided the following: Engine Oil-HH150-32094, Large Hyd- HH3A0-82623 and Small Hyd- HHK70-14073. I see what you mean though as when I search Messicks, they list a different model for Hyd. Weird. They user manual doesn't list the part numbers unfortunately. I will have to confirm on my next oil change. Please let me know if you find out otherwise! Thx