Very nice y'all! I have this same Rifle (1997 Rem.Classic in 280 Rem.) Great job!
@Turnbullcustomguns5 ай бұрын
Thanks, Great Caliber!
@nativepride1875 ай бұрын
Nice job on the stock sir
@Turnbullcustomguns5 ай бұрын
Thanks! and thanks for watching!
@EarlMerGerdsGarage5 ай бұрын
Great to see your work Don. I hope your business is doing well! Since moving to PA I've been getting into flintlocks and 18th century crafts! This is Earl from KSI by the way.
@Turnbullcustomguns5 ай бұрын
Great to hear from you. I just received multiple box's of flintlock parts, original and reproduction. Let me know if you need anything. Thanks for commenting.
@gb-bp1me5 ай бұрын
Nice job.
@Turnbullcustomguns5 ай бұрын
Thank you. Thanks for taking the time to leave a comment. And thanks for watching.
@francisrotondo648529 күн бұрын
Great job. Best wishes to birthday girl. 🎉
@louisriverin22955 ай бұрын
Why you dont use a steel cabinet scraper for the old finish removal ? That's the Mark Novak ( Anvill ) method, I tried it and it works a lot better than sanding paper.
@Turnbullcustomguns5 ай бұрын
I may give that a try. Thanks for watching and thanks for the comment!
@remi34793 ай бұрын
Excellent job.
@Turnbullcustomguns3 ай бұрын
Thank you very much!
@Turnbullcustomguns2 ай бұрын
Thank you!
@tucobenedicto17805 ай бұрын
I enjoyed the Peanuts-like music.
@Turnbullcustomguns5 ай бұрын
Thanks. It made me chuckle when I put it in the video. Thanks for watching.
@garybalasa31584 ай бұрын
Not sure about this, I have been making and refinishing for near on 30 years, so much happening hers, not sure if all of it is good.
@Turnbullcustomguns4 ай бұрын
I am sure it's all good, this is actually one of the methods I was shown when I was trained by two master Gunsmiths over 20 years ago, yes, I have changed the process over the years to add my own experience and twist to my original training, I'm pretty sure I'm the only one that wet sands this type of finish, it comes from when I used to paint cars. I'm sure you have your methods that work. I know this method works for me, it is only one of the many, many ways a gunstock can be refinished. I have no doubt you have done some beautiful work over the years. I would love to see some of your techniques and learn from them as well, please email me links to some videos I would love to watch. Always be open to learn and grow in your chosen path. I learn every day that get up and go into the shop, then the next day I try to apply the good things learned to the next day of work. Thanks for watching, I hope you tune in for more videos and continue to share your thoughts.
@gatorbite63543 ай бұрын
very nice. how much does something like this cost?
@Turnbullcustomguns3 ай бұрын
shoot me an e-mail tcgarms@gmail.com on what you have and I'll give you a rough estimate. Thanks for watching.
@tenacioustinkerer76612 ай бұрын
What lubricant do you prefer to use when wet sanding? Final result looks flawless!
@Turnbullcustomguns2 ай бұрын
On this one I just used water... On a more recent one I have used Ballistol. Thanks for watching.
@reeseharris95785 ай бұрын
You should mask off the checkering first!
@Turnbullcustomguns5 ай бұрын
It is a good idea. And I sometimes do. I have found that the bulk of the tape can make it difficult for me to sand as close to the checkering and maintain the control I like. It’s just faster for me to clean up any sanding overruns when I recut the border than remasking when sanding. I appreciated your comment. And observation.
@darreldwalton87635 ай бұрын
Not a lot of folks appreciate how tough it can be to recut, refurbish, or replace worn or damaged checkering. The stock in your vid was a pretty mild examples. Show an old model 70 that's been "rode hard and put away wet" that's had the checkering drug across granite or lava rocks.... I gave up trying to please people. Now I do my own, mostly pawn shop refugees and forlorn stuff off the back rows of used racks. I make ME happy, so I've pretty much gone exclusively to oil finishes. I don't have to keep a shop open, or pay a light bill by turning out product anymore.
@Turnbullcustomguns5 ай бұрын
@@darreldwalton8763 Thanks for your comments, these video's I put up are work I do for my customers. So yes, I enjoy an oil rubbed finish as well, and if time or money were not a factor everyone would opt for a nice pores filled oil rubbed finish. I present costs and options to my customers, and we pick a process that is within their budget and provide the look and finish that will work for them. I have stocks I finished similarly to this one and have hunted with them for 20 years and they have held up well. Keeping a shop open is a an important goal as well.
@darreldwalton87635 ай бұрын
@Turnbullcustomguns Don't get me wrong. My most favorite, "Ol' Death and Destruction ", a Husqvarna 270, I shot with rattle can urethane, then freshened the checkering, as you did. It's only lasted since, oh, about 1994, a divorce present to myself. Ain't skeered to try anything once!
@Murzington5 ай бұрын
What did you dilute the urethane with?
@Turnbullcustomguns5 ай бұрын
Mineral Spirits, but always check the manufactures recommendation on the finish you are using.
@tobiassauer78835 ай бұрын
Nope …how not to finish a stock
@adammmmmmmmmmmmm5 ай бұрын
Curious to know the correct way then?
@Turnbullcustomguns5 ай бұрын
@tobiassauer7883 I have been contemplating how to reply to this comment, there are as many ways to refinish a firearm it seems, as politicians trying to take away our 2nd amendment rights. There are also as many different finishes to go with them. The finish choice is determined by the original finish on the gun, the owner of the gun, and his intended use. No, I would not refinish a Purdey double barrel rifle in this manner or a vintage Winchester, this rifle is not to be compared to those standards. Regardless of the value of the gun I still take the time to make sure edges are not rounded stock lines remain straight, Checkering borders are crisp and clean and wood is not removed in excess. The proof of a properly refinished firearm is in the end result, personal satisfaction of a job well done, and customers that are happy with the cost and the final appearance. As for Durability... I have two guns I have hunted with for the last 20 years with this same finish, prepared the same way. No chipping, No pealing, and no water absorption.