Rig moving

drilling rig move in Alberta

[@alcyr5655]

Why all the haters. I did service rigs from '85-'02. Yes it looks a little sketchy because I've seen a few bumpers ripped of bed trucks from being dragged behind Cat's in frame deep mud. I was trying to figure out if it was Ted Arthur Trucking or Artie Kose. Then I read through the comments, nobody was chewing on lead pencils, the guy running across the deck didn't have scissors. No one was watching the t.v. to closely. Tried to see how the rigging was set up. You have to admit cool video. No one wants to sea a video about how your office divider wall almost fell over into your cubicle. Also please leave out pinched fingers replacing water bottle in water cooler.

[@1Imrichard]

are you related to rick cyr

[@ekoandre]

Your absolutely right. The problem is you need two pole trucks for that to work, and the other truck was delayed a couple hours. So, instead of waiting we did it the old way, it was the first time I've seen it done like that.

[@johnpirie2583]

I’ve seen it done that way every time back in the day both with one or two poll trucks and its still cool to see

[@oldredcoonhound2182]

A lot of guys did it this way.. I watched KAPS trucking a lot. KOS had some excellent Picker operators.

[@ekoandre]

With the size of bed trucks these days, this method puts alot of weight on the pole truck holding it up. Keeping the drawworks near the back, as we did, helped with this problem. The typical method is surely less hazardous, but i don't see a problem with using this as an alternative when necessary.

[@garywhite3209]

Hell yeah, that's a first for me, n I've seen a lot of fun shit in 15 years in industry. That looks like a good day to be moving rigs

[@316tomiller]

Yes, that's the way we did it in the 1960'/70's. I paid my way through first year of Engineering at U of S ( Regina) driving and swamping on an HD22/70 Hayes. At the time they were one of the biggest, ugliest truck in Saskatchewan. It was just barely legal weight on the front axel when empty. Luckily we didn't run into many weigh stations so got away with it. Hard work but satisfying.

[@peterbiltroy]

I love the swamper running across the frozen steel bed and hopping in the cab!

[@finishblademan1]

It's been since the 80's since I've worked in the patch, but I remember taking the drawworks on/off by hooking the #2 winch line to the front of the load ( thru the bed) and the #1 winch to the load line.Sucking on the #2 and dogging out the #1 would have pulled this load on the sub or vice versa to take it off. Of course that was ( in the old days)!!

[@natefehrn7546]

finishblademan1

[@lydiacapps709]

@Hello Finishblademan how are you doing

[@johnpirie2583]

Man I miss those days big time . you know you earned your pay at the end of the day

[@kriscalverley2131]

Great video. Thank you. Piglet holding a sow,sucking draw works on. Gin poles, tie backs,dead man hitch,snatch block,pole cap. Land transport days heyday 93-97. R.i.p. darrin, buddy,clarence c,Mathew, Alvin. Lots more gone now

[@byronleatham1183]

And my wife first time she ever seen on oil rig we was riding down she watched me all day at the end of the day the only thing she said is now I know why you like come along so much after watching those trucks lifting things

[@santacruz986]

Safety man would have a field day if there was one

[@natefehrn7546]

santacruz986

[@John-vl1sq]

It looks like we did the same thing in the 1960s I was working Derrick for rig 6 for Peter Bawden

[@barnycanuck6234]

Me too John. I worked for Peter Bawden Rig 1 back in the 60's, pushed by Jack Wyman. His son in law George Properrzi (sp) worked motors, Dave Saunders was the driller we worked for.

[@John-vl1sq]

I work for tool push chabaty driller Dave darbyshire

[@John-vl1sq]

And also rig 18 for bill and don and Denis snidemillar before it went to spitberger I didn’t go for I was getting married

[@barnycanuck6234]

@@John-vl1sq Right on John , ok have a great Xmas

[@barnycanuck6234]

@@John-vl1sq Aw Geez not Dennis Snydmiller. Haha I worked on Brinkerhoff 19 when he was pushing it south of Grande Prairie. That guy was a lot of fun.

[@pfow2006]

hmm only been on a hand full of smaller rigs, always thought I had a rough idea what a pole truck was used for. guess I was wrong about the pole trucks. is it normal to take the draw works of the rig b4 moving? guess it must be on a double or triple hu?

[@armz8894]

Always ! You can haul the sub with the draw works on

[@armz8894]

Can't **

[@ykb946]

Wouldn't it depend on how fare the next lease is If it's just a K or so then keep it on

[@branonjohnson8617]

Atk and babco! The memories of working there... Glad I got out when I did! Gets pretty old putting your life in the hands of someone who really doesn't give a shit

[@mtl-ss1538]

Some Kiwi log trucks in New Zealand,; Off highway double units @300,000lbs kzbin.info/www/bejne/j3q7oI2wm6d9gZI NZ on highway trucks cross weight @ 125200lbs, kzbin.info/www/bejne/gqrYeX2Hl7Opqac ;This is a real Logging Company in New Zealand,,@ over 200 Rigs, on highway gross weights 125000 lbs,;.kzbin.info/www/bejne/jpuqe6GBosiGpqM

[@kennypeshlakai2416]

That swamper on the gin truck bed while lifting the bed truck to load the drawworks is not a good place . That #2 line snaps(or winch fail), everything comes down, and that cable is coming back to cab/tractor faster than .....😔

[@santacruz986]

Did this a few times because a few years ago cause there was no other pole truck get er done fast do it in one shot and over with I see this is a pretty old post comments from 5 years back

[@noegomez5447]

Super swamper ride in the cab with the driver

[@santacruz986]

Wow I've been moving. Rigs for more than 40 years did this same thing many many times but that's not allowed any more Swamper running around out there on the bed ... Frozen deck no fall protection ... To me just raises a whole bunch of red flags right from the get go they just don't want it done like this any more .... And to put it on a vidieo I don't think Atk or kos would want it either for safety standards . There gone now . But like I said tru the 70s the 80's the 90' s we did it like this but now days most every where wouldn't allow it maybe this is a old video . Made me kind of laugh to see this posted . Lol but it's the only way we usted to do it . Now they want two pole trucks at the other end of the sub letting it down it's been that way for along time now .

[@lydiacapps709]

@Hello Santacruz how are you doing

[@santacruz986]

@@lydiacapps709not bad for an old guy

[@lydiacapps709]

@@santacruz986 ok I hope we can get to know each other if you don’t mind

[@timbertrans]

this is proably not the most safe way, is that the reason this isn't practiced anymore?

[@BestQuran4All]

Hey who is the guy who posted this because that is me jumping out of the truck ... the drivers name is dal , that was north of Edson

[@meteor5452]

Lol kickin it old school

[@byronleatham1183]

That's the way they did it for years and years nothing unusual but things change I've seen trucks do a lot more than that a lot sketchier looking never seen an accent happen on one yet

[@ozzyfranf]

Oh, that looks like fun!!

[@ykb946]

Where is that located? And what Rig is that it looks like a Beaver Rig?

[@JMAC-rs6ey]

Nooo c - 500 KENWORTH

[@user-xp7ml2lp3e]

Dose any body need aswamper

[@user-xp7ml2lp3e]

Ammmmoo awaaaa

[@killbillyapocalypse4230]

Risky, it's good that everything held together and all, but yah worst case? Not worth it.

[@cowboy6998]

Old school

[@CyberKolobok]

Hellish stuff

[@eerfhcunl7212]

No OHSA in Canada a?

[@bobbybones62]

fox creek

[@fsjfred]

shut up pete! u cant use one pole truck as a tie back, u need two, but buddy said one was late thats why they went old school.

[@noegomez5447]

To little of a rig

[@armz8894]

Whaaaat the ffuck!! That's one way to break your back! If that winch line broke... The driver would be Fucked. D&D never does stupid shit like this ! TAKE NOTE

[@redlegmike88]

thats my thoughts, whats wrong with a two winch?

[@zacbloor-chrest7670]

isn't this fast trucking

[@marinviorel8707]

I will say the corect title is : killing people company